devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: Tim Harvey <tharvey@gateworks.com>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	NXP Linux Team <linux-imx@nxp.com>,
	Fabio Estevam <festevam@gmail.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Subject: Re: [PATCH] ARM: dts: imx6qdl-gw52xx: add CAN regulator
Date: Fri, 16 Sep 2022 20:07:42 +0800	[thread overview]
Message-ID: <20220916120742.GN1728671@dragon> (raw)
In-Reply-To: <20220912215312.964722-1-tharvey@gateworks.com>

On Mon, Sep 12, 2022 at 02:53:12PM -0700, Tim Harvey wrote:
> The GW52xx has a tranceiver with a STBY pin connected to an IMX6 GPIO.
> Configure this as a regulator to drive it low when CAN is in use.
> 
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
>  arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 18 +++++++++++++++++-
>  1 file changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> index b1df2beb2832..ec6b55bf77d9 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> @@ -137,6 +137,16 @@ reg_5p0v: regulator-5p0v {
>  		regulator-always-on;
>  	};
>  
> +	reg_can1_stby: regulator-can1-stby {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_can1>;
> +		compatible = "regulator-fixed";

Can we have properties start with 'compatible' just like other nodes?

Shawn

> +		regulator-name = "can1_stby";
> +		gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
>  	reg_usb_otg_vbus: regulator-usb-otg-vbus {
>  		compatible = "regulator-fixed";
>  		regulator-name = "usb_otg_vbus";
> @@ -170,6 +180,7 @@ &audmux {
>  &can1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_flexcan1>;
> +	xceiver-supply = <&reg_can1_stby>;
>  	status = "okay";
>  };
>  
> @@ -612,7 +623,6 @@ pinctrl_flexcan1: flexcan1grp {
>  		fsl,pins = <
>  			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
>  			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
> -			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
>  		>;
>  	};
>  
> @@ -702,6 +712,12 @@ MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
>  		>;
>  	};
>  
> +	pinctrl_reg_can1: regcan1grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
> +		>;
> +	};
> +
>  	pinctrl_uart1: uart1grp {
>  		fsl,pins = <
>  			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
> -- 
> 2.25.1
> 

      reply	other threads:[~2022-09-16 12:07 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-12 21:53 [PATCH] ARM: dts: imx6qdl-gw52xx: add CAN regulator Tim Harvey
2022-09-16 12:07 ` Shawn Guo [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220916120742.GN1728671@dragon \
    --to=shawnguo@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=tharvey@gateworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).