[PATCH v6 1/4] dt-bindings: qcom-qce: Convert bindings to yaml

[Bhupesh Sharma <bhupesh.sharma@linaro.org>]

Convert Qualcomm QCE crypto devicetree binding to YAML.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Jordan Crouse <jorcrous@amazon.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 .../devicetree/bindings/crypto/qcom-qce.txt   | 25 -------
 .../devicetree/bindings/crypto/qcom-qce.yaml  | 67 +++++++++++++++++++
 2 files changed, 67 insertions(+), 25 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.txt
 create mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.yaml

diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
deleted file mode 100644
index fdd53b184ba8..000000000000
--- a/Documentation/devicetree/bindings/crypto/qcom-qce.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Qualcomm crypto engine driver
-
-Required properties:
-
-- compatible  : should be "qcom,crypto-v5.1"
-- reg         : specifies base physical address and size of the registers map
-- clocks      : phandle to clock-controller plus clock-specifier pair
-- clock-names : "iface" clocks register interface
-                "bus" clocks data transfer interface
-                "core" clocks rest of the crypto block
-- dmas        : DMA specifiers for tx and rx dma channels. For more see
-                Documentation/devicetree/bindings/dma/dma.txt
-- dma-names   : DMA request names should be "rx" and "tx"
-
-Example:
-	crypto@fd45a000 {
-		compatible = "qcom,crypto-v5.1";
-		reg = <0xfd45a000 0x6000>;
-		clocks = <&gcc GCC_CE2_AHB_CLK>,
-			 <&gcc GCC_CE2_AXI_CLK>,
-			 <&gcc GCC_CE2_CLK>;
-		clock-names = "iface", "bus", "core";
-		dmas = <&cryptobam 2>, <&cryptobam 3>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
new file mode 100644
index 000000000000..8df47e8513b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm crypto engine driver
+
+maintainers:
+  - Bhupesh Sharma <bhupesh.sharma@linaro.org>
+
+description:
+  This document defines the binding for the QCE crypto
+  controller found on Qualcomm parts.
+
+properties:
+  compatible:
+    const: qcom,crypto-v5.1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: iface clocks register interface.
+      - description: bus clocks data transfer interface.
+      - description: core clocks rest of the crypto block.
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  dmas:
+    items:
+      - description: DMA specifiers for rx dma channel.
+      - description: DMA specifiers for tx dma channel.
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-apq8084.h>
+    crypto-engine@fd45a000 {
+        compatible = "qcom,crypto-v5.1";
+        reg = <0xfd45a000 0x6000>;
+        clocks = <&gcc GCC_CE2_AHB_CLK>,
+                 <&gcc GCC_CE2_AXI_CLK>,
+                 <&gcc GCC_CE2_CLK>;
+        clock-names = "iface", "bus", "core";
+        dmas = <&cryptobam 2>, <&cryptobam 3>;
+        dma-names = "rx", "tx";
+    };
-- 
2.37.1