[PATCH v4 0/8] Add support for sm6115,4250 and OnePlus Nord N100

[PATCH v4 0/8] Add support for sm6115,4250 and OnePlus Nord N100

[Iskren Chernev]

Changes from v3
---------------
v3: https://lore.kernel.org/linux-arm-msm/20220910143213.477261-1-iskren.chernev@gmail.com/
- move qcom,smem to reserved-memory region
- change soc to soc@0
- pad reg addresses to 8 digits
- align pinctrl with latest linux-next
- rename usb labels to align with existing socs
- use named masks for armv8-timer
- order billie2 overrides by label name
- dual license dts(i) files
- dropped merged patches

NOTE: Not done as suggested:
- armv8-timer: I used GIC_CPU_MASK_SIMPLE(4) instead of GIC_CPU_MASK_SIMPLE(8),
  which would have changed the hardcoded mask
- I haven't changed the default state of regulators - there seems to be no
  clear way to do that across the board

Changes from v2
---------------
v2: https://lore.kernel.org/all/20220903174150.3566935-1-iskren.chernev@gmail.com/
- fix ufs bindings to follow sdm845
- drop nvmem, firmware, reserved-range patches (merged)
- add patch that fixes sm6115-dwc3 bindings (4/9)
- add patch that fixes qcom,sm6115-sdhci bindings (5/9)
- add patch that fixes qcom,sm6115-qmp-ufs-phy bindings (6/9)
- drop dynamic reserved memory regions
- drop clock-output-names
- drop frequency for timer
- fix mmc pinctrl regression in v2
- move board clock freqs in relative scope
- fix indentation to please Konrad
- reorder some DT props (reg, status, compatible)

Changes from v1
---------------
v1: https://lore.kernel.org/all/20220901072414.1923075-1-iskren.chernev@gmail.com/
- merge dtsi patches in one
- fix ufs binding (allow ice register)
- fix dt schema issues (to the best of my ability)
- add a few necessary bindings (compats)
- some comments on remaining schema issues after commit msg (patch 7 and 9)

This series adds support for sm6115 (clocks, pinctrl, usb, ufs, sdhc),
sm4250 (mostly empty shell on top of sm6115) and finally basic OnePlus Nord
N100 (codename billie2), including the above mentiond items plus simple
framebuffer.

Please note that this series depends on [1] (driver compat and bindings).

[1] https://lore.kernel.org/linux-devicetree/20220815100952.23795-1-a39.skl@gmail.com/

Iskren Chernev (8):
  dt-bindings: ufs: qcom: Add sm6115 binding
  dt-bindings: arm: cpus: Add kryo240 compatible
  dt-bindings: arm: qcom: Add compatible for oneplus,billie2 phone
  dt-bindings: usb: qcom,dwc3: Fix SM6115 clocks, irqs
  dt-bindings: phy: qcom,qmp-ufs: Fix SM6115 clocks, regs
  arm64: dts: qcom: sm6115: Add basic soc dtsi
  arm64: dts: qcom: sm4250: Add soc dtsi
  arm64: dts: qcom: sm4250: Add support for oneplus-billie2

 .../devicetree/bindings/arm/cpus.yaml         |   1 +
 .../devicetree/bindings/arm/qcom.yaml         |   7 +
 .../bindings/phy/qcom,qmp-ufs-phy.yaml        |   3 +-
 .../devicetree/bindings/ufs/qcom,ufs.yaml     |  26 +
 .../devicetree/bindings/usb/qcom,dwc3.yaml    |   3 +-
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm4250-oneplus-billie2.dts  | 241 +++++
 arch/arm64/boot/dts/qcom/sm4250.dtsi          |  38 +
 arch/arm64/boot/dts/qcom/sm6115.dtsi          | 854 ++++++++++++++++++
 9 files changed, 1172 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm4250.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsi

-- 
2.37.3

[PATCH v4 1/8] dt-bindings: ufs: qcom: Add sm6115 binding

[Iskren Chernev]

Add SM6115 UFS to DT schema.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/ufs/qcom,ufs.yaml     | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index f2d6298d926c..b517d76215e3 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -28,6 +28,7 @@ properties:
           - qcom,msm8998-ufshc
           - qcom,sc8280xp-ufshc
           - qcom,sdm845-ufshc
+          - qcom,sm6115-ufshc
           - qcom,sm6350-ufshc
           - qcom,sm8150-ufshc
           - qcom,sm8250-ufshc
@@ -178,6 +179,31 @@ allOf:
           minItems: 1
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6115-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+            - const: ice_core_clk
+        reg:
+          minItems: 2
+          maxItems: 2
+
     # TODO: define clock bindings for qcom,msm8994-ufshc
 
 unevaluatedProperties: false
-- 
2.37.3

[PATCH v4 2/8] dt-bindings: arm: cpus: Add kryo240 compatible

[Iskren Chernev]

Kryo240 is found in SM4250, the slower sibling of the SM6115.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/arm/cpus.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index a07c5bac7c46..5c13b73e4d57 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -174,6 +174,7 @@ properties:
       - nvidia,tegra194-carmel
       - qcom,krait
       - qcom,kryo
+      - qcom,kryo240
       - qcom,kryo250
       - qcom,kryo260
       - qcom,kryo280
-- 
2.37.3

Re: [PATCH v4 2/8] dt-bindings: arm: cpus: Add kryo240 compatible

[robh]

On Mon, 19 Sep 2022 21:06:12 +0300, Iskren Chernev wrote:
> Kryo240 is found in SM4250, the slower sibling of the SM6115.
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
> Reviewed-by: Vinod Koul <vkoul@kernel.org>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/arm/cpus.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Applied, thanks!

[PATCH v4 3/8] dt-bindings: arm: qcom: Add compatible for oneplus,billie2 phone

[Iskren Chernev]

oneplus,billie2 (OnePlus Nord N100) is based on QualComm Snapdragon
SM4250 SoC.

Add support for the same in dt-bindings.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 1b5ac6b02bc5..35cfc1ef7522 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -54,6 +54,8 @@ description: |
         sdm845
         sdx55
         sdx65
+        sm4250
+        sm6115
         sm6125
         sm6350
         sm7225
@@ -690,6 +692,11 @@ properties:
               - xiaomi,polaris
           - const: qcom,sdm845
 
+      - items:
+          - enum:
+              - oneplus,billie2
+          - const: qcom,sm4250
+
       - items:
           - enum:
               - sony,pdx201
-- 
2.37.3

[PATCH v4 4/8] dt-bindings: usb: qcom,dwc3: Fix SM6115 clocks, irqs

[Iskren Chernev]

SM6115 has 6 clocks and 2 interrupts.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index cd2f7cb6745a..4ca07c79819d 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -294,6 +294,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sm6115-dwc3
               - qcom,sm6125-dwc3
               - qcom,sm8150-dwc3
               - qcom,sm8250-dwc3
@@ -348,7 +349,6 @@ allOf:
               - qcom,sdx55-dwc3
               - qcom,sdx65-dwc3
               - qcom,sm4250-dwc3
-              - qcom,sm6115-dwc3
               - qcom,sm6125-dwc3
               - qcom,sm6350-dwc3
               - qcom,sm8150-dwc3
@@ -380,6 +380,7 @@ allOf:
               - qcom,msm8953-dwc3
               - qcom,msm8996-dwc3
               - qcom,msm8998-dwc3
+              - qcom,sm6115-dwc3
     then:
       properties:
         interrupts:
-- 
2.37.3

[PATCH v4 5/8] dt-bindings: phy: qcom,qmp-ufs: Fix SM6115 clocks, regs

[Iskren Chernev]

The Sm6115 UFS PHY has 2 clocks and 3 regs.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml
index 6e3c186b9972..815c375d0f7b 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml
@@ -121,6 +121,7 @@ allOf:
               - qcom,sc8180x-qmp-ufs-phy
               - qcom,sc8280xp-qmp-ufs-phy
               - qcom,sdm845-qmp-ufs-phy
+              - qcom,sm6115-qmp-ufs-phy
               - qcom,sm6350-qmp-ufs-phy
               - qcom,sm8150-qmp-ufs-phy
               - qcom,sm8250-qmp-ufs-phy
@@ -180,7 +181,6 @@ allOf:
           contains:
             enum:
               - qcom,sc8180x-qmp-ufs-phy
-              - qcom,sm6115-qmp-ufs-phy
     then:
       patternProperties:
         "^phy@[0-9a-f]+$":
@@ -198,6 +198,7 @@ allOf:
           contains:
             enum:
               - qcom,msm8996-qmp-ufs-phy
+              - qcom,sm6115-qmp-ufs-phy
     then:
       patternProperties:
         "^phy@[0-9a-f]+$":
-- 
2.37.3

Re: [PATCH v4 5/8] dt-bindings: phy: qcom,qmp-ufs: Fix SM6115 clocks, regs

[Vinod Koul]

On 19-09-22, 21:06, Iskren Chernev wrote:
> The Sm6115 UFS PHY has 2 clocks and 3 regs.

Applied, thanks

-- 
~Vinod

[PATCH v4 6/8] arm64: dts: qcom: sm6115: Add basic soc dtsi

[Iskren Chernev]

Add support for Qualcomm SM6115 SoC. This includes:
- GCC
- Pinctrl
- RPM (CC+PD)
- USB
- MMC
- UFS

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 854 +++++++++++++++++++++++++++
 1 file changed, 854 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsi

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
new file mode 100644
index 000000000000..0340ed21be05
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -0,0 +1,854 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sm6115.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x1>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x2>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x3>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x101>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x102>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x103>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm6115", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@45700000 {
+			reg = <0x0 0x45700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@45e00000 {
+			reg = <0x0 0x45e00000 0x0 0x140000>;
+			no-map;
+		};
+
+		sec_apps_mem: memory@45fff000 {
+			reg = <0x0 0x45fff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@46000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x46000000 0x0 0x200000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		cdsp_sec_mem: memory@46200000 {
+			reg = <0x0 0x46200000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_modem_mem: memory@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x6900000>;
+			no-map;
+		};
+
+		pil_video_mem: memory@51400000 {
+			reg = <0x0 0x51400000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@51900000 {
+			reg = <0x0 0x51900000 0x0 0x100000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: memory@51a00000 {
+			reg = <0x0 0x51a00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_adsp_mem: memory@53800000 {
+			reg = <0x0 0x53800000 0x0 0x2800000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: memory@56100000 {
+			reg = <0x0 0x56100000 0x0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: memory@56110000 {
+			reg = <0x0 0x56110000 0x0 0x5000>;
+			no-map;
+		};
+
+		pil_gpu_mem: memory@56115000 {
+			reg = <0x0 0x56115000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_memory: memory@5c000000 {
+			reg = <0x0 0x5c000000 0x0 0x00f00000>;
+			no-map;
+		};
+
+		dfps_data_memory: memory@5cf00000 {
+			reg = <0x0 0x5cf00000 0x0 0x0100000>;
+			no-map;
+		};
+
+		removed_mem: memory@60000000 {
+			reg = <0x0 0x60000000 0x0 0x3900000>;
+			no-map;
+		};
+	};
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+
+		interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&apcs_glb 0>;
+
+		rpm_requests: rpm-requests {
+			compatible = "qcom,rpm-sm6115";
+			qcom,glink-channels = "rpm_requests";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
+			rpmpd: power-controller {
+				compatible = "qcom,sm6115-rpmpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmpd_opp_table>;
+
+				rpmpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmpd_opp_min_svs: opp1 {
+						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					};
+
+					rpmpd_opp_low_svs: opp2 {
+						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					};
+
+					rpmpd_opp_svs: opp3 {
+						opp-level = <RPM_SMD_LEVEL_SVS>;
+					};
+
+					rpmpd_opp_svs_plus: opp4 {
+						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					};
+
+					rpmpd_opp_nom: opp5 {
+						opp-level = <RPM_SMD_LEVEL_NOM>;
+					};
+
+					rpmpd_opp_nom_plus: opp6 {
+						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					};
+
+					rpmpd_opp_turbo: opp7 {
+						opp-level = <RPM_SMD_LEVEL_TURBO>;
+					};
+
+					rpmpd_opp_turbo_plus: opp8 {
+						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+					};
+				};
+			};
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x00340000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6115-tlmm";
+			reg = <0x00500000 0x400000>, <0x00900000 0x400000>, <0x00d00000 0x400000>;
+			reg-names = "west", "south", "east";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 121>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				sd-cd-pins {
+					pins = "gpio88";
+					function = "gpio";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				sd-cd-pins {
+					pins = "gpio88";
+					function = "gpio";
+					bias-disable;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,gcc-sm6115";
+			reg = <0x01400000 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@1613000 {
+			compatible = "qcom,sm6115-qusb2-phy";
+			reg = <0x01613000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+
+			status = "disabled";
+		};
+
+		qfprom@1b40000 {
+			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
+			reg = <0x01b40000 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@25b {
+				reg = <0x25b 0x1>;
+				bits = <1 4>;
+			};
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x01c40000 0x1100>,
+			      <0x01e00000 0x2000000>,
+			      <0x03e00000 0x100000>,
+			      <0x03f00000 0xa0000>,
+			      <0x01c0a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x045f0000 0x7000>;
+		};
+
+		sdhc_1: mmc@4744000 {
+			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x04744000 0x1000>, <0x04745000 0x1000>, <0x04748000 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface", "core", "xo", "ice";
+
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
+			pinctrl-names = "default", "sleep";
+
+			bus-width = <8>;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x04784000 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			pinctrl-0 = <&sdc2_state_on>;
+			pinctrl-1 = <&sdc2_state_off>;
+			pinctrl-names = "default", "sleep";
+
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			iommus = <&apps_smmu 0x00a0 0x0>;
+			resets = <&gcc GCC_SDCC2_BCR>;
+
+			bus-width = <4>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+			};
+		};
+
+		ufs_mem_hc: ufs@4804000 {
+			compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <1>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			iommus = <&apps_smmu 0x100 0>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "ice_core_clk";
+
+			freq-table-hz = <50000000 200000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 150000000>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@4807000 {
+			compatible = "qcom,sm6115-qmp-ufs-phy";
+			reg = <0x04807000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@4807400 {
+				reg = <0x4807400 0x098>,
+				      <0x4807600 0x130>,
+				      <0x4807c00 0x16c>;
+				#phy-cells = <0>;
+			};
+		};
+
+		usb_1: usb@4ef8800 {
+			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
+			reg = <0x04ef8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <66666667>;
+
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+			status = "disabled";
+
+			usb_1_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0x04e00000 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_1_hsphy>;
+				phy-names = "usb2-phy";
+				iommus = <&apps_smmu 0x120 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				maximum-speed = "high-speed";
+				dr_mode = "peripheral";
+			};
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,sm6115-smmu-500", "arm,mmu-500";
+			reg = <0x0c600000 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apcs_glb: mailbox@f111000 {
+			compatible = "qcom,sm6115-apcs-hmss-global";
+			reg = <0x0f111000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@f120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0f120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clock-frequency = <19200000>;
+
+			frame@f121000 {
+				reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@f123000 {
+				reg = <0x0f123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f124000 {
+				reg = <0x0f124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f125000 {
+				reg = <0x0f125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f126000 {
+				reg = <0x0f126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f127000 {
+				reg = <0x0f127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f128000 {
+				reg = <0x0f128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0f200000 0x10000>, <0x0f300000 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
-- 
2.37.3

[PATCH v4 7/8] arm64: dts: qcom: sm4250: Add soc dtsi

[Iskren Chernev]

The SM4250 is a downclocked version of the SM6115.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm4250.dtsi | 38 ++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm4250.dtsi

diff --git a/arch/arm64/boot/dts/qcom/sm4250.dtsi b/arch/arm64/boot/dts/qcom/sm4250.dtsi
new file mode 100644
index 000000000000..c5add8f44fc0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4250.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+#include "sm6115.dtsi"
+
+&CPU0 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU1 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU2 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU3 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU4 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU5 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU6 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU7 {
+	compatible = "qcom,kryo240";
+};
-- 
2.37.3

[PATCH v4 8/8] arm64: dts: qcom: sm4250: Add support for oneplus-billie2

[Iskren Chernev]

Add initial support for OnePlus Nord N100, based on SM4250. Currently
working:
- boots
- usb
- built-in flash storage (UFS)
- SD card reader

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm4250-oneplus-billie2.dts  | 241 ++++++++++++++++++
 2 files changed, 242 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d7669a7cee9f..2656ef21b943 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-polaris.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-shift-axolotl.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-samsung-w737.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
new file mode 100644
index 000000000000..a3f1c7c41fd7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm4250.dtsi"
+
+/ {
+	model = "OnePlus Nord N100";
+	compatible = "oneplus,billie2", "qcom,sm4250";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
+	qcom,board-id = <0x1000b 0x00>;
+
+	aliases {
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (1600 * 720 * 4)>;
+			width = <720>;
+			height = <1600>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+};
+
+&reserved_memory {
+	bootloader_log_mem: memory@5fff7000 {
+		reg = <0x0 0x5fff7000 0x0 0x8000>;
+		no-map;
+	};
+
+	ramoops@cbe00000 {
+		compatible = "ramoops";
+		reg = <0x0 0xcbe00000 0x0 0x400000>;
+		record-size = <0x40000>;
+		pmsg-size = <0x200000>;
+		console-size = <0x40000>;
+		ftrace-size = <0x40000>;
+	};
+
+	param_mem: memory@cc200000 {
+		reg = <0x0 0xcc200000 0x0 0x100000>;
+		no-map;
+	};
+
+	mtp_mem: memory@cc300000 {
+		reg = <0x00 0xcc300000 0x00 0xb00000>;
+		no-map;
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		vreg_s7a: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s8a: s8 {
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3056000>;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <14 4>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l24a>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&vreg_l11a>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vddp-ref-clk-supply = <&vreg_l18a>;
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
-- 
2.37.3