[PATCH] dt-bindings: memory-controller: st,stm32: Fix st,fmc2_ebi-cs-write-address-setup-ns

[Marek Vasut <marex@denx.de>]

The property st,fmc2_ebi-cs-write-address-setup-ns should really be
st,fmc2-ebi-cs-write-address-setup-ns (there is underscore _ between
fmc2 and ebi and there should be a dash - instead). This is a remnant
from conversion of old non-upstream bindings. Fix it.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
---
 .../bindings/memory-controllers/st,stm32-fmc2-ebi.yaml          | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index 6b516d3895af2..a1f535cececcc 100644
--- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -156,7 +156,7 @@ patternProperties:
         description: This property defines the data latency before reading or
           writing the first data in nanoseconds.
 
-      st,fmc2_ebi-cs-write-address-setup-ns:
+      st,fmc2-ebi-cs-write-address-setup-ns:
         description: This property defines the duration of the address setup
           phase in nanoseconds used for asynchronous write transactions.
 
-- 
2.35.1