From: Hal Feng <hal.feng@linux.starfivetech.com>
To: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <maz@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Linus Walleij <linus.walleij@linaro.org>,
Emil Renner Berthing <kernel@esmil.dk>,
Hal Feng <hal.feng@linux.starfivetech.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 27/30] RISC-V: Add initial StarFive JH7110 device tree
Date: Fri, 30 Sep 2022 15:49:14 +0800 [thread overview]
Message-ID: <20220930074914.6757-1-hal.feng@linux.starfivetech.com> (raw)
In-Reply-To: <20220929143225.17907-1-hal.feng@linux.starfivetech.com>
From: Emil Renner Berthing <kernel@esmil.dk>
Add initial device tree for the JH7110 RISC-V SoC by
StarFive Technology Ltd.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@linux.starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110.dtsi | 449 +++++++++++++++++++++++
1 file changed, 449 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
new file mode 100644
index 000000000000..46f418d4198a
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive-jh7110-sys.h>
+#include <dt-bindings/clock/starfive-jh7110-aon.h>
+#include <dt-bindings/reset/starfive-jh7110.h>
+
+/ {
+ compatible = "starfive,jh7110";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <0>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <8192>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <16384>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imac";
+ tlb-split;
+ status = "disabled";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu1: cpu@1 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <1>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu2: cpu@2 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <2>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu2_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu3: cpu@3 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <3>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu3_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu4: cpu@4 {
+ compatible = "sifive,u74-mc", "riscv";
+ reg = <4>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+
+ cpu4_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+
+ core4 {
+ cpu = <&cpu4>;
+ };
+ };
+ };
+ };
+
+ osc: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ clk_rtc: clk_rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ gmac0_rmii_refin: gmac0_rmii_refin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ gmac0_rgmii_rxin: gmac0_rgmii_rxin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ gmac1_rmii_refin: gmac1_rmii_refin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ gmac1_rgmii_rxin: gmac1_rgmii_rxin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ i2stx_bclk_ext: i2stx_bclk_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+
+ i2stx_lrck_ext: i2stx_lrck_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <192000>;
+ };
+
+ i2srx_bclk_ext: i2srx_bclk_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+
+ i2srx_lrck_ext: i2srx_lrck_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <192000>;
+ };
+
+ tdm_ext: tdm_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <49152000>;
+ };
+
+ mclk_ext: mclk_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <49152000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clint: clint@2000000 {
+ compatible = "starfive,jh7110-clint", "sifive,clint0";
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>,
+ <&cpu4_intc 3>, <&cpu4_intc 7>;
+ };
+
+ plic: plic@c000000 {
+ compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ interrupts-extended = <&cpu0_intc 11>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>,
+ <&cpu4_intc 11>, <&cpu4_intc 9>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ riscv,ndev = <136>;
+ };
+
+ ccache: cache-controller@2010000 {
+ compatible = "starfive,jh7110-ccache", "cache";
+ reg = <0x0 0x2010000 0x0 0x4000>;
+ interrupts = <1>, <3>, <4>, <2>;
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <2048>;
+ cache-size = <2097152>;
+ cache-unified;
+ };
+
+ syscrg: syscrg@13020000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x13020000 0x0 0x10000>;
+
+ syscrg_clk: clock-controller@13020000 {
+ compatible = "starfive,jh7110-clkgen-sys";
+ clocks = <&osc>, <&gmac1_rmii_refin>,
+ <&gmac1_rgmii_rxin>,
+ <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+ <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+ <&tdm_ext>, <&mclk_ext>;
+ clock-names = "osc", "gmac1_rmii_refin",
+ "gmac1_rgmii_rxin",
+ "i2stx_bclk_ext", "i2stx_lrck_ext",
+ "i2srx_bclk_ext", "i2srx_lrck_ext",
+ "tdm_ext", "mclk_ext";
+ #clock-cells = <1>;
+ };
+
+ syscrg_rst: reset-controller@13020000 {
+ compatible = "starfive,jh7110-reset";
+ #reset-cells = <1>;
+ starfive,assert-offset = <0x2F8>;
+ starfive,status-offset= <0x308>;
+ starfive,nr-resets = <JH7110_SYSRST_END>;
+ };
+ };
+
+ aoncrg: aoncrg@17000000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x17000000 0x0 0x10000>;
+
+ aoncrg_clk: clock-controller@17000000 {
+ compatible = "starfive,jh7110-clkgen-aon";
+ clocks = <&osc>, <&clk_rtc>,
+ <&gmac0_rmii_refin>, <&gmac0_rgmii_rxin>,
+ <&syscrg_clk JH7110_SYSCLK_STG_AXIAHB>,
+ <&syscrg_clk JH7110_SYSCLK_APB_BUS_FUNC>;
+ clock-names = "osc", "clk_rtc",
+ "gmac0_rmii_refin", "gmac0_rgmii_rxin",
+ "stg_axiahb", "apb_bus_func";
+ #clock-cells = <1>;
+ };
+
+ aoncrg_rst: reset-controller@17000000 {
+ compatible = "starfive,jh7110-reset";
+ #reset-cells = <1>;
+ starfive,assert-offset = <0x38>;
+ starfive,status-offset= <0x3C>;
+ starfive,nr-resets = <JH7110_AONRST_END>;
+ };
+ };
+
+ gpio: gpio@13040000 {
+ compatible = "starfive,jh7110-sys-pinctrl";
+ reg = <0x0 0x13040000 0x0 0x10000>;
+ reg-names = "control";
+ clocks = <&syscrg_clk JH7110_SYSCLK_IOMUX>;
+ resets = <&syscrg_rst JH7110_SYSRST_IOMUX>;
+ interrupts = <86>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ ngpios = <64>;
+ };
+
+ gpioa: gpio@17020000 {
+ compatible = "starfive,jh7110-aon-pinctrl";
+ reg = <0x0 0x17020000 0x0 0x10000>;
+ reg-names = "control";
+ resets = <&aoncrg_rst JH7110_AONRST_AON_IOMUX>;
+ interrupts = <85>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ ngpios = <4>;
+ };
+
+ uart0: serial@10000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10000000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART0_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART0_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART0_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART0_CORE>;
+ interrupts = <32>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart1: serial@10010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10010000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART1_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART1_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART1_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART1_CORE>;
+ interrupts = <33>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart2: serial@10020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x10020000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART2_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART2_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART2_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART2_CORE>;
+ interrupts = <34>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart3: serial@12000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12000000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART3_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART3_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART3_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART3_CORE>;
+ interrupts = <45>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart4: serial@12010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12010000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART4_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART4_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART4_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART4_CORE>;
+ interrupts = <46>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart5: serial@12020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x12020000 0x0 0x10000>;
+ clocks = <&syscrg_clk JH7110_SYSCLK_UART5_CORE>,
+ <&syscrg_clk JH7110_SYSCLK_UART5_APB>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&syscrg_rst JH7110_SYSRST_UART5_APB>,
+ <&syscrg_rst JH7110_SYSRST_UART5_CORE>;
+ interrupts = <47>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+ };
+};
--
2.17.1
next prev parent reply other threads:[~2022-09-30 7:51 UTC|newest]
Thread overview: 105+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-29 14:31 [PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support Hal Feng
2022-09-29 14:31 ` [PATCH v1 01/30] dt-bindings: riscv: Add StarFive JH7110 bindings Hal Feng
2022-09-29 14:34 ` Krzysztof Kozlowski
2022-10-08 3:44 ` Hal Feng
2022-09-29 14:31 ` [PATCH v1 02/30] dt-bindings: timer: Add StarFive JH7110 clint Hal Feng
2022-09-29 14:34 ` Krzysztof Kozlowski
2022-09-29 14:31 ` [PATCH v1 03/30] dt-bindings: interrupt-controller: Add StarFive JH7110 plic Hal Feng
2022-09-29 14:35 ` Krzysztof Kozlowski
2022-09-29 14:31 ` [PATCH v1 04/30] dt-bindings: sifive-l2-cache: Support StarFive JH71x0 SoCs Hal Feng
2022-09-29 14:36 ` Krzysztof Kozlowski
2022-09-29 15:33 ` Conor Dooley
2022-10-03 9:26 ` Ben Dooks
2022-10-08 18:54 ` Hal Feng
2022-09-29 14:32 ` [PATCH v1 05/30] soc: sifive: l2 cache: Convert to platform driver Hal Feng
2022-09-29 15:32 ` Conor Dooley
2022-09-29 17:57 ` Ben Dooks
2022-10-05 13:44 ` Emil Renner Berthing
2022-10-05 13:48 ` Ben Dooks
2022-10-05 13:55 ` Emil Renner Berthing
2022-10-05 14:05 ` Conor Dooley
2022-10-08 18:07 ` Hal Feng
2022-09-29 14:32 ` [PATCH v1 06/30] soc: sifive: l2 cache: Add StarFive JH71x0 support Hal Feng
2022-09-29 14:32 ` [PATCH v1 07/30] reset: starfive: jh7100: Use 32bit I/O on 32bit registers Hal Feng
2022-09-29 14:32 ` [PATCH v1 08/30] reset: starfive: jh7100: Use regmap APIs to operate registers Hal Feng
2022-09-29 14:32 ` [PATCH v1 09/30] reset: starfive: jh7100: Move necessary properties to device tree Hal Feng
2022-09-30 20:49 ` Rob Herring
2022-10-05 13:20 ` Emil Renner Berthing
2022-09-29 14:32 ` [PATCH v1 10/30] reset: starfive: Rename 'reset-starfive-jh7100.c' to 'reset-starfive.c' Hal Feng
2022-09-29 14:45 ` [PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support Krzysztof Kozlowski
2022-09-29 17:59 ` Conor Dooley
2022-10-01 1:13 ` hal.feng
2022-09-29 16:35 ` [PATCH v1 11/30] dt-bindings: reset: Add StarFive JH7110 reset definitions Hal Feng
2022-09-29 17:51 ` [PATCH v1 12/30] dt-bindings: reset: Add starfive,jh7110-reset bindings Hal Feng
2022-09-29 18:21 ` Rob Herring
2022-09-29 18:40 ` Rob Herring
2022-09-29 18:43 ` Rob Herring
2022-10-11 15:30 ` Hal Feng
2022-10-11 16:36 ` Krzysztof Kozlowski
2022-10-12 13:16 ` Hal Feng
2022-10-12 13:33 ` Krzysztof Kozlowski
2022-10-12 14:05 ` Conor Dooley
2022-10-12 15:21 ` Hal Feng
2022-10-12 14:53 ` Hal Feng
2022-10-12 8:01 ` Emil Renner Berthing
2022-09-29 17:53 ` [PATCH v1 13/30] reset: starfive: Add StarFive JH7110 SoC support Hal Feng
2022-09-29 17:54 ` [PATCH v1 14/30] clk: starfive: Factor out common clock driver code Hal Feng
2022-09-30 21:43 ` Stephen Boyd
2022-09-29 17:56 ` [PATCH v1 15/30] clk: starfive: Use regmap APIs to operate registers Hal Feng
2022-09-30 21:48 ` Stephen Boyd
2022-10-05 13:14 ` Emil Renner Berthing
2022-10-12 23:05 ` Stephen Boyd
2022-10-23 4:11 ` Hal Feng
2022-10-23 10:25 ` Conor Dooley
2022-10-28 3:16 ` Hal Feng
2022-10-27 1:26 ` Stephen Boyd
2022-10-28 2:46 ` Hal Feng
2022-09-29 17:56 ` [PATCH v1 16/30] dt-bindings: clock: Add StarFive JH7110 system clock definitions Hal Feng
2022-09-29 22:26 ` [PATCH v1 17/30] dt-bindings: clock: Add starfive,jh7110-clkgen-sys bindings Hal Feng
2022-09-30 1:55 ` Rob Herring
2022-09-30 10:58 ` Krzysztof Kozlowski
2022-10-11 17:52 ` Hal Feng
2022-09-30 1:50 ` [PATCH v1 18/30] clk: starfive: Add StarFive JH7110 system clock driver Hal Feng
2022-09-30 5:49 ` [PATCH v1 19/30] dt-bindings: clock: Add StarFive JH7110 always-on definitions Hal Feng
2022-09-30 5:56 ` [PATCH v1 20/30] dt-bindings: clock: Add starfive,jh7110-clkgen-aon bindings Hal Feng
2022-09-30 10:59 ` Krzysztof Kozlowski
2022-10-11 18:01 ` Hal Feng
2022-09-30 12:51 ` Rob Herring
2022-09-30 6:03 ` [PATCH v1 21/30] clk: starfive: Add StarFive JH7110 always-on clock driver Hal Feng
2022-09-30 6:08 ` [PATCH v1 22/30] pinctrl: Create subdirectory for StarFive drivers Hal Feng
2022-10-04 8:43 ` Linus Walleij
2022-09-30 6:14 ` [PATCH v1 23/30] pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" Hal Feng
2022-09-30 21:28 ` Rob Herring
2022-10-04 8:48 ` Linus Walleij
2022-10-04 8:58 ` Conor Dooley
2022-10-04 9:13 ` Linus Walleij
2022-10-04 9:21 ` Conor Dooley
2022-10-04 9:24 ` Conor Dooley
2022-10-06 9:07 ` Geert Uytterhoeven
2022-09-30 7:33 ` [PATCH v1 24/30] dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions Hal Feng
2022-09-30 11:00 ` Krzysztof Kozlowski
2022-09-30 7:38 ` [PATCH v1 25/30] dt-bindings: pinctrl: Add StarFive JH7110 pinctrl bindings Hal Feng
2022-09-30 11:05 ` Krzysztof Kozlowski
2022-09-30 12:16 ` Rob Herring
2022-10-20 7:28 ` Icenowy Zheng
2022-09-30 7:43 ` [PATCH v1 26/30] pinctrl: starfive: Add StarFive JH7110 driver Hal Feng
2022-10-01 14:35 ` kernel test robot
2022-10-04 8:56 ` Linus Walleij
2022-10-05 13:31 ` Emil Renner Berthing
2022-10-14 2:05 ` Hal Feng
2022-09-30 7:49 ` Hal Feng [this message]
2022-10-01 10:52 ` [PATCH v1 27/30] RISC-V: Add initial StarFive JH7110 device tree Conor Dooley
2022-10-03 7:45 ` Krzysztof Kozlowski
2022-10-14 9:41 ` Hal Feng
2022-09-30 7:53 ` [PATCH v1 28/30] RISC-V: Add StarFive JH7110 VisionFive2 board " Hal Feng
2022-10-01 11:14 ` Conor Dooley
2022-10-29 8:18 ` Hal Feng
2022-09-30 9:06 ` [PATCH v1 29/30] RISC-V: defconfig: Enable CONFIG_SERIAL_8250_DW Hal Feng
2022-09-30 20:54 ` Ben Dooks
2022-09-30 21:41 ` Conor Dooley
2022-10-14 3:24 ` Hal Feng
2022-09-30 12:23 ` [PATCH v1 30/30] RISC-V: Add StarFive JH7100 and JH7110 SoC Kconfig options Hal Feng
2022-09-30 12:37 ` Conor Dooley
2022-10-11 18:32 ` Hal Feng
2022-10-05 13:05 ` [PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support Emil Renner Berthing
2022-10-08 3:18 ` Hal Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220930074914.6757-1-hal.feng@linux.starfivetech.com \
--to=hal.feng@linux.starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@esmil.dk \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=maz@kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).