From: Alexandre Mergnat <amergnat@baylibre.com>
To: Rob Herring <robh+dt@kernel.org>, Yong Wu <yong.wu@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Will Deacon <will@kernel.org>, Joerg Roedel <joro@8bytes.org>,
Robin Murphy <robin.murphy@arm.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Alexandre Mergnat <amergnat@baylibre.com>,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Fabien Parent <fparent@baylibre.com>,
Markus Schneider-Pargmann <msp@baylibre.com>,
Amjad Ouled-Ameur <aouledameur@baylibre.com>,
devicetree@vger.kernel.org, iommu@lists.linux.dev
Subject: [PATCH v2 2/3] iommu/mediatek: add support for 6-bit encoded port IDs
Date: Tue, 04 Oct 2022 12:01:40 +0200 [thread overview]
Message-ID: <20221001-iommu-support-v2-2-dbfef2eeebc9@baylibre.com> (raw)
In-Reply-To: <20221001-iommu-support-v2-0-dbfef2eeebc9@baylibre.com>
From: Fabien Parent <fparent@baylibre.com>
Until now the port ID was always encoded as a 5-bit data. On MT8365,
the port ID is encoded as a 6-bit data. This requires to rework the
macros F_MMU_INT_ID_LARB_ID, and F_MMU_INT_ID_PORT_ID in order
to support 5-bit and 6-bit encoded port IDs.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
drivers/iommu/mtk_iommu.c | 24 ++++++++++++++++++++----
1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 5a4e00e4bbbc..a57ce509c8b5 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -108,8 +108,10 @@
#define F_MMU_INT_ID_SUB_COMM_ID(a) (((a) >> 7) & 0x3)
#define F_MMU_INT_ID_COMM_ID_EXT(a) (((a) >> 10) & 0x7)
#define F_MMU_INT_ID_SUB_COMM_ID_EXT(a) (((a) >> 7) & 0x7)
-#define F_MMU_INT_ID_LARB_ID(a) (((a) >> 7) & 0x7)
-#define F_MMU_INT_ID_PORT_ID(a) (((a) >> 2) & 0x1f)
+#define F_MMU_INT_ID_LARB_ID(a, int_id_port_width) \
+ ((a) >> (((int_id_port_width) + 2) & 0x7))
+#define F_MMU_INT_ID_PORT_ID(a, int_id_port_width) \
+ (((a) >> 2) & GENMASK((int_id_port_width) - 1, 0))
#define MTK_PROTECT_PA_ALIGN 256
#define MTK_IOMMU_BANK_SZ 0x1000
@@ -188,6 +190,7 @@ struct mtk_iommu_plat_data {
enum mtk_iommu_plat m4u_plat;
u32 flags;
u32 inv_sel_reg;
+ u8 int_id_port_width;
char *pericfg_comp_str;
struct list_head *hw_list;
@@ -441,7 +444,8 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
fault_pa |= (u64)pa34_32 << 32;
if (MTK_IOMMU_IS_TYPE(plat_data, MTK_IOMMU_TYPE_MM)) {
- fault_port = F_MMU_INT_ID_PORT_ID(regval);
+ fault_port = F_MMU_INT_ID_PORT_ID(regval,
+ data->plat_data->int_id_port_width);
if (MTK_IOMMU_HAS_FLAG(plat_data, HAS_SUB_COMM_2BITS)) {
fault_larb = F_MMU_INT_ID_COMM_ID(regval);
sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval);
@@ -449,7 +453,8 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
fault_larb = F_MMU_INT_ID_COMM_ID_EXT(regval);
sub_comm = F_MMU_INT_ID_SUB_COMM_ID_EXT(regval);
} else {
- fault_larb = F_MMU_INT_ID_LARB_ID(regval);
+ fault_larb = F_MMU_INT_ID_LARB_ID(
+ regval, data->plat_data->int_id_port_width);
}
fault_larb = data->plat_data->larbid_remap[fault_larb][sub_comm];
}
@@ -1379,6 +1384,7 @@ static const struct mtk_iommu_plat_data mt2712_data = {
.banks_enable = {true},
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
+ .int_id_port_width = 5,
};
static const struct mtk_iommu_plat_data mt6779_data = {
@@ -1391,6 +1397,7 @@ static const struct mtk_iommu_plat_data mt6779_data = {
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
+ .int_id_port_width = 5,
};
static const struct mtk_iommu_plat_data mt6795_data = {
@@ -1404,6 +1411,7 @@ static const struct mtk_iommu_plat_data mt6795_data = {
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}, {3}, {4}}, /* Linear mapping. */
+ .int_id_port_width = 5,
};
static const struct mtk_iommu_plat_data mt8167_data = {
@@ -1415,6 +1423,7 @@ static const struct mtk_iommu_plat_data mt8167_data = {
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}}, /* Linear mapping. */
+ .int_id_port_width = 5,
};
static const struct mtk_iommu_plat_data mt8173_data = {
@@ -1428,6 +1437,7 @@ static const struct mtk_iommu_plat_data mt8173_data = {
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
+ .int_id_port_width = 5,
};
static const struct mtk_iommu_plat_data mt8183_data = {
@@ -1439,6 +1449,7 @@ static const struct mtk_iommu_plat_data mt8183_data = {
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
+ .int_id_port_width = 5,
};
static const struct mtk_iommu_plat_data mt8186_data_mm = {
@@ -1453,6 +1464,7 @@ static const struct mtk_iommu_plat_data mt8186_data_mm = {
.banks_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
+ .int_id_port_width = 5,
};
static const struct mtk_iommu_plat_data mt8192_data = {
@@ -1466,6 +1478,7 @@ static const struct mtk_iommu_plat_data mt8192_data = {
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
.larbid_remap = {{0}, {1}, {4, 5}, {7}, {2}, {9, 11, 19, 20},
{0, 14, 16}, {0, 13, 18, 17}},
+ .int_id_port_width = 5,
};
static const struct mtk_iommu_plat_data mt8195_data_infra = {
@@ -1481,6 +1494,7 @@ static const struct mtk_iommu_plat_data mt8195_data_infra = {
},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
+ .int_id_port_width = 5,
};
static const struct mtk_iommu_plat_data mt8195_data_vdo = {
@@ -1495,6 +1509,7 @@ static const struct mtk_iommu_plat_data mt8195_data_vdo = {
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
.larbid_remap = {{2, 0}, {21}, {24}, {7}, {19}, {9, 10, 11},
{13, 17, 15/* 17b */, 25}, {5}},
+ .int_id_port_width = 5,
};
static const struct mtk_iommu_plat_data mt8195_data_vpp = {
@@ -1513,6 +1528,7 @@ static const struct mtk_iommu_plat_data mt8195_data_vpp = {
/* 16: 16a; 29: 16b; 30: CCUtop0; 31: CCUtop1 */
{14, 16, 29, 26, 30, 31, 18},
{4, MTK_INVALID_LARBID, MTK_INVALID_LARBID, MTK_INVALID_LARBID, 6}},
+ .int_id_port_width = 5,
};
static const struct of_device_id mtk_iommu_of_ids[] = {
--
b4 0.10.1
next prev parent reply other threads:[~2022-10-04 10:02 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-04 10:01 [PATCH v2 0/3] iommu/mediatek: Add mt8365 iommu support Alexandre Mergnat
2022-10-04 10:01 ` [PATCH v2 1/3] dt-bindings: iommu: mediatek: add binding documentation for MT8365 SoC Alexandre Mergnat
2022-10-04 12:01 ` AngeloGioacchino Del Regno
2022-10-06 9:29 ` Markus Schneider-Pargmann
2022-10-04 10:01 ` Alexandre Mergnat [this message]
2022-10-04 11:59 ` [PATCH v2 2/3] iommu/mediatek: add support for 6-bit encoded port IDs AngeloGioacchino Del Regno
2022-10-06 10:46 ` Robin Murphy
2022-10-04 10:01 ` [PATCH v2 3/3] iommu/mediatek: add support for MT8365 SoC Alexandre Mergnat
2022-10-04 12:00 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221001-iommu-support-v2-2-dbfef2eeebc9@baylibre.com \
--to=amergnat@baylibre.com \
--cc=aouledameur@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=fparent@baylibre.com \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=msp@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=will@kernel.org \
--cc=yong.wu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).