From: Melody Olvera <quic_molvera@quicinc.com>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Melody Olvera <quic_molvera@quicinc.com>
Subject: [PATCH 17/19] arm64: dts: qcom: qdru1000: Add I2C nodes for QUP
Date: Fri, 30 Sep 2022 20:06:54 -0700 [thread overview]
Message-ID: <20221001030656.29365-18-quic_molvera@quicinc.com> (raw)
In-Reply-To: <20221001030656.29365-1-quic_molvera@quicinc.com>
Add I2C nodes to the QUP along with pinconf for these nodes.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
arch/arm64/boot/dts/qcom/qdru1000.dtsi | 365 +++++++++++++++++++++++++
1 file changed, 365 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qdru1000.dtsi b/arch/arm64/boot/dts/qcom/qdru1000.dtsi
index c105bc15995b..40d7cc4c1f3d 100644
--- a/arch/arm64/boot/dts/qcom/qdru1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdru1000.dtsi
@@ -302,6 +302,132 @@ uart7: serial@99c000 {
#size-cells = <0>;
status = "disabled";
};
+
+ i2c1: i2c@984000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x984000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+ <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c1_data_clk>;
+ dmas = <&gpi_dma0 0 1 3 64 0>,
+ <&gpi_dma0 1 1 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@988000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x988000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+ <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_data_clk>;
+ dmas = <&gpi_dma0 0 2 3 64 0>,
+ <&gpi_dma0 1 2 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@98c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x98c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+ <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c3_data_clk>;
+ dmas = <&gpi_dma0 0 3 3 64 0>,
+ <&gpi_dma0 1 3 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@990000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x990000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+ <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c4_data_clk>;
+ dmas = <&gpi_dma0 0 4 3 64 0>,
+ <&gpi_dma0 1 4 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@994000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x994000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+ <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c5_data_clk>;
+ dmas = <&gpi_dma0 0 5 3 64 0>,
+ <&gpi_dma0 1 5 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@998000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x998000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+ <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c6_data_clk>;
+ dmas = <&gpi_dma0 0 6 3 64 0>,
+ <&gpi_dma0 1 6 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
qupv3_id_1: geniqup@ac0000 {
@@ -316,6 +442,153 @@ qupv3_id_1: geniqup@ac0000 {
ranges;
status = "disabled";
+
+ i2c9: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa84000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c9_data_clk>;
+ dmas = <&gpi_dma1 0 1 3 64 0>,
+ <&gpi_dma1 1 1 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa88000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_data_clk>;
+ dmas = <&gpi_dma1 0 2 3 64 0>,
+ <&gpi_dma1 1 2 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@a8c000 {
+ compatible = "qcom,i2c-geni";
+ reg = <0x0 0xa8c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c11_data_clk>;
+ dmas = <&gpi_dma1 0 3 3 64 0>,
+ <&gpi_dma1 1 3 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c12: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa90000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c12_data_clk>;
+ dmas = <&gpi_dma1 0 4 3 64 0>,
+ <&gpi_dma1 1 4 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c13: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa94000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c13_data_clk>;
+ dmas = <&gpi_dma1 0 5 3 64 0>,
+ <&gpi_dma1 1 5 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c14: i2c@a98000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa98000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c14_data_clk>;
+ dmas = <&gpi_dma1 0 6 3 64 0>,
+ <&gpi_dma1 1 6 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c15: i2c@a9c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa9c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c15_data_clk>;
+ dmas = <&gpi_dma1 0 7 3 64 0>,
+ <&gpi_dma1 1 7 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
@@ -381,6 +654,98 @@ rx {
bias-disable;
};
};
+
+ qup_i2c1_data_clk: qup-i2c1-data-clk {
+ pins = "gpio10", "gpio11";
+ function = "qup0_se1_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c2_data_clk: qup-i2c2-data-clk {
+ pins = "gpio12", "gpio13";
+ function = "qup0_se2_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c3_data_clk: qup-i2c3-data-clk {
+ pins = "gpio14", "gpio15";
+ function = "qup0_se3_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c4_data_clk: qup-i2c4-data-clk {
+ pins = "gpio16", "gpio17";
+ function = "qup0_se4_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c5_data_clk: qup-i2c5-data-clk {
+ pins = "gpio130", "gpio131";
+ function = "qup0_se5_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c6_data_clk: qup-i2c6-data-clk {
+ pins = "gpio132", "gpio133";
+ function = "qup0_se6_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c9_data_clk: qup-i2c9-data-clk {
+ pins = "gpio22", "gpio23";
+ function = "qup1_se1_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c10_data_clk: qup-i2c10-data-clk {
+ pins = "gpio24", "gpio25";
+ function = "qup1_se2_l0";
+ drive-strength = <2>;
+ bias-pulll-up;
+ };
+
+ qup_i2c11_data_clk: qup-i2c11-data-clk {
+ pins = "gpio26", "gpio27";
+ function = "qup1_se3_l0";
+ drive-strength = <2>;
+ bias-pulll-up;
+ };
+
+ qup_i2c12_data_clk: qup-i2c12-data-clk {
+ pins = "gpio28", "gpio29";
+ function = "qup1_se4_l0";
+ drive-strength = <2>;
+ bias-pulll-up;
+ };
+
+ qup_i2c13_data_clk: qup-i2c13-data-clk {
+ pins = "gpio30", "gpio31";
+ function = "qup1_se5_l0";
+ drive-strength = <2>;
+ bias-pulll-up;
+ };
+
+ qup_i2c14_data_clk: qup-i2c14-data-clk {
+ pins = "gpio34", "gpio35";
+ function = "qup1_se6_l0";
+ drive-strength = <2>;
+ bias-pulll-up;
+ };
+
+ qup_i2c15_data_clk: qup-i2c15-data-clk {
+ pins = "gpio40", "gpio41";
+ function = "qup1_se7_l0";
+ drive-strength = <2>;
+ bias-pulll-up;
+ };
+
};
pdc: interrupt-controller@b220000 {
--
2.37.3
next prev parent reply other threads:[~2022-10-01 3:09 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-01 3:06 [PATCH 00/19] Add base device tree files for QDU1000/QRU1000 Melody Olvera
2022-10-01 3:06 ` [PATCH 01/19] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs Melody Olvera
2022-10-01 7:22 ` Dmitry Baryshkov
2022-10-11 18:21 ` Melody Olvera
2022-10-01 9:12 ` Krzysztof Kozlowski
2022-10-11 18:22 ` Melody Olvera
2022-10-01 3:06 ` [PATCH 02/19] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs Melody Olvera
2022-10-01 7:28 ` Dmitry Baryshkov
2022-10-11 18:29 ` Melody Olvera
2022-10-01 9:12 ` Krzysztof Kozlowski
2022-10-11 18:31 ` Melody Olvera
2022-10-01 3:06 ` [PATCH 03/19] arm64: dts: qcom: qdru1000: Add tlmm nodes Melody Olvera
2022-10-01 7:26 ` Dmitry Baryshkov
2022-10-11 18:40 ` Melody Olvera
2022-10-01 9:14 ` Krzysztof Kozlowski
2022-10-11 18:48 ` Melody Olvera
2022-10-11 18:57 ` Krzysztof Kozlowski
2022-10-11 19:05 ` Melody Olvera
2022-10-11 19:19 ` Krzysztof Kozlowski
2022-10-11 20:01 ` Melody Olvera
2022-10-01 3:06 ` [PATCH 04/19] arm64: dts: qcom: qdu1000: Add reserved memory nodes Melody Olvera
2022-10-01 9:14 ` Krzysztof Kozlowski
2022-10-01 3:06 ` [PATCH 05/19] arm64: dts: qcom: qru1000: " Melody Olvera
2022-10-01 3:06 ` [PATCH 06/19] arm64: dts: qcom: qdru1000: Add smmu nodes Melody Olvera
2022-10-01 7:23 ` Dmitry Baryshkov
2022-10-01 3:06 ` [PATCH 07/19] arm64: dts: qcom: qdu1000-idp: Add RPMH regulators nodes Melody Olvera
2022-10-01 9:15 ` Krzysztof Kozlowski
2022-10-11 21:08 ` Melody Olvera
2022-10-01 3:06 ` [PATCH 08/19] arm64: dts: qcom: qru1000-idp: " Melody Olvera
2022-10-01 9:15 ` Krzysztof Kozlowski
2022-10-11 21:08 ` Melody Olvera
2022-10-01 3:06 ` [PATCH 09/19] arm64: dts: qcom: qdru1000: Add interconnect nodes Melody Olvera
2022-10-01 9:16 ` Krzysztof Kozlowski
2022-10-01 3:06 ` [PATCH 10/19] arm64: dts: qcom: qdru1000: Add rpmhpd node Melody Olvera
2022-10-01 3:06 ` [PATCH 11/19] arm64: dts: qcom: qdru1000: Add spmi node Melody Olvera
2022-10-01 3:06 ` [PATCH 12/19] arm64: dts: qcom: qdu1000-idp: Include pmic file Melody Olvera
2022-10-01 9:16 ` Krzysztof Kozlowski
2022-10-01 3:06 ` [PATCH 13/19] arm64: dts: qcom: qru1000-idp: " Melody Olvera
2022-10-01 3:06 ` [PATCH 14/19] arm64: dts: qcom: qdru1000: Add cpufreq support Melody Olvera
2022-10-01 3:06 ` [PATCH 15/19] arm64: dts: qcom: qdru1000: Add additional QUP nodes Melody Olvera
2022-10-01 3:06 ` [PATCH 16/19] arm64: dts: qcom: qdru1000: Add gpi_dma nodes Melody Olvera
2022-10-01 3:06 ` Melody Olvera [this message]
2022-10-01 7:30 ` [PATCH 17/19] arm64: dts: qcom: qdru1000: Add I2C nodes for QUP Dmitry Baryshkov
2022-10-01 3:06 ` [PATCH 18/19] arm64: dts: qcom: qdru1000: Add SPI devices to QUP nodes Melody Olvera
2022-10-01 3:06 ` [PATCH 19/19] arm64: dts: qcom: qdru1000: Add additional UART instances Melody Olvera
2022-10-01 7:32 ` [PATCH 00/19] Add base device tree files for QDU1000/QRU1000 Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221001030656.29365-18-quic_molvera@quicinc.com \
--to=quic_molvera@quicinc.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).