[PATCH] devicetree: hwmon: shtc1: Clean up spelling mistakes and grammar

[PATCH] devicetree: hwmon: shtc1: Clean up spelling mistakes and grammar

[Colin Ian King]

The yaml text contains some minor spelling mistakes and grammar issues,
clean these up.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
---
 .../devicetree/bindings/hwmon/sensirion,shtc1.yaml        | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
index 7d49478d9668..159238efa9ed 100644
--- a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Christopher Ruehl chris.ruehl@gtsys.com.hk
 
 description: |
-  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
+  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors
   designed especially for battery-driven high-volume consumer electronics
   applications.
   For further information refere to Documentation/hwmon/shtc1.rst
@@ -31,13 +31,13 @@ properties:
   sensirion,blocking-io:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
-      If set, the driver hold the i2c bus until measurement is finished.
+      If set, the driver holds the i2c bus until the measurement is finished.
 
   sensirion,low-precision:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
-      If set, the sensor aquire data with low precision (not recommended).
-      The driver aquire data with high precision by default.
+      If set, the sensor acquires data with low precision (not recommended).
+      The driver acquires data with high precision by default.
 
 required:
   - compatible
-- 
2.37.1

Re: [PATCH] devicetree: hwmon: shtc1: Clean up spelling mistakes and grammar

[Krzysztof Kozlowski]

On 28/09/2022 23:31, Colin Ian King wrote:
> The yaml text contains some minor spelling mistakes and grammar issues,
> clean these up.
> 
> Signed-off-by: Colin Ian King <colin.i.king@gmail.com>

Subject prefix: dt-bindings: hwmon: sensirion,shtc1:

With the subject fixes:

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH] devicetree: hwmon: shtc1: Clean up spelling mistakes and grammar

[Guenter Roeck]

On Wed, Sep 28, 2022 at 10:31:39PM +0100, Colin Ian King wrote:
> The yaml text contains some minor spelling mistakes and grammar issues,
> clean these up.
> 
> Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Applied (after changing subject as requested)

Thanks,
Guenter

> ---
>  .../devicetree/bindings/hwmon/sensirion,shtc1.yaml        | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
> index 7d49478d9668..159238efa9ed 100644
> --- a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
> @@ -10,7 +10,7 @@ maintainers:
>    - Christopher Ruehl chris.ruehl@gtsys.com.hk
>  
>  description: |
> -  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
> +  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors
>    designed especially for battery-driven high-volume consumer electronics
>    applications.
>    For further information refere to Documentation/hwmon/shtc1.rst
> @@ -31,13 +31,13 @@ properties:
>    sensirion,blocking-io:
>      $ref: /schemas/types.yaml#/definitions/flag
>      description:
> -      If set, the driver hold the i2c bus until measurement is finished.
> +      If set, the driver holds the i2c bus until the measurement is finished.
>  
>    sensirion,low-precision:
>      $ref: /schemas/types.yaml#/definitions/flag
>      description:
> -      If set, the sensor aquire data with low precision (not recommended).
> -      The driver aquire data with high precision by default.
> +      If set, the sensor acquires data with low precision (not recommended).
> +      The driver acquires data with high precision by default.
>  
>  required:
>    - compatible