[PATCH 4/4] arm: dts: colibri-imx7: fix confusing naming

[Philippe Schenker <dev@pschenker.ch>]

From: Philippe Schenker <philippe.schenker@toradex.com>

fix the naming of node-name vs label-name to the correct one, that is
the label was always correct.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>

---

 arch/arm/boot/dts/imx7-colibri.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index a8c31ee65623..3bea7549b762 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -652,7 +652,7 @@ &iomuxc {
 	 * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3.
 	 * Don't use them simultaneously.
 	 */
-	pinctrl_atmel_adapter: atmelconnectorgrp {
+	pinctrl_atmel_adapter: atmeladaptergrp {
 		fsl,pins = <
 			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74 /* SODIMM 28 / INT */
 			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
@@ -660,7 +660,7 @@ MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
 	};
 
 	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
-	pinctrl_atmel_connector: atmeladaptergrp {
+	pinctrl_atmel_connector: atmelconnectorgrp {
 		fsl,pins = <
 			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 / RST */
 			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 / INT */
-- 
2.37.3