* [PATCH v3 0/2] remoteproc: qcom: Add support for MSM8953 ADSP @ 2022-10-08 17:46 Sireesh Kodali 2022-10-08 17:46 ` [PATCH v3 1/2] remoteproc: qcom: pas: Add MSM8953 ADSP PIL support Sireesh Kodali 2022-10-08 17:46 ` [PATCH v3 2/2] dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953 Sireesh Kodali 0 siblings, 2 replies; 6+ messages in thread From: Sireesh Kodali @ 2022-10-08 17:46 UTC (permalink / raw) To: devicetree, linux-arm-msm, linux-remoteproc, ~postmarketos/upstreaming, linux-kernel Cc: andersson, krzysztof.kozlowski+dt, dmitry.baryshkov, Sireesh Kodali This patch series adds support for the ADSP PIL as found on the MSM8953 platform. It is a subset of a previous patch series. Changes since v2: * Made ordering of compatible strings lexical in doc patch Link to v1: https://lkml.org/lkml/2022/10/6/18 Sireesh Kodali (2): remoteproc: qcom: pas: Add MSM8953 ADSP PIL support dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953 Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 5 +++++ drivers/remoteproc/qcom_q6v5_pas.c | 1 + 2 files changed, 6 insertions(+) -- 2.37.3 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3 1/2] remoteproc: qcom: pas: Add MSM8953 ADSP PIL support 2022-10-08 17:46 [PATCH v3 0/2] remoteproc: qcom: Add support for MSM8953 ADSP Sireesh Kodali @ 2022-10-08 17:46 ` Sireesh Kodali 2022-10-10 10:52 ` Krzysztof Kozlowski 2022-10-08 17:46 ` [PATCH v3 2/2] dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953 Sireesh Kodali 1 sibling, 1 reply; 6+ messages in thread From: Sireesh Kodali @ 2022-10-08 17:46 UTC (permalink / raw) To: devicetree, linux-arm-msm, linux-remoteproc, ~postmarketos/upstreaming, linux-kernel Cc: andersson, krzysztof.kozlowski+dt, dmitry.baryshkov, Sireesh Kodali, Andy Gross, Konrad Dybcio, Mathieu Poirier Add support for the Audio DSP PIL found on the Qualcomm MSM8953 platform. The same configuration is used on all SoCs based on the MSM8953 platform (SDM450, SDA450, SDM625, SDM632, APQ8053). Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> --- drivers/remoteproc/qcom_q6v5_pas.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c index 6afd0941e552..70b3a37c4814 100644 --- a/drivers/remoteproc/qcom_q6v5_pas.c +++ b/drivers/remoteproc/qcom_q6v5_pas.c @@ -950,6 +950,7 @@ static const struct of_device_id adsp_of_match[] = { { .compatible = "qcom,msm8226-adsp-pil", .data = &adsp_resource_init}, { .compatible = "qcom,msm8974-adsp-pil", .data = &adsp_resource_init}, { .compatible = "qcom,msm8996-adsp-pil", .data = &msm8996_adsp_resource}, + { .compatible = "qcom,msm8953-adsp-pil", .data = &msm8996_adsp_resource}, { .compatible = "qcom,msm8996-slpi-pil", .data = &slpi_resource_init}, { .compatible = "qcom,msm8998-adsp-pas", .data = &msm8996_adsp_resource}, { .compatible = "qcom,msm8998-slpi-pas", .data = &slpi_resource_init}, -- 2.37.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 1/2] remoteproc: qcom: pas: Add MSM8953 ADSP PIL support 2022-10-08 17:46 ` [PATCH v3 1/2] remoteproc: qcom: pas: Add MSM8953 ADSP PIL support Sireesh Kodali @ 2022-10-10 10:52 ` Krzysztof Kozlowski 2022-10-12 18:01 ` Sireesh Kodali 0 siblings, 1 reply; 6+ messages in thread From: Krzysztof Kozlowski @ 2022-10-10 10:52 UTC (permalink / raw) To: Sireesh Kodali, devicetree, linux-arm-msm, linux-remoteproc, ~postmarketos/upstreaming, linux-kernel Cc: andersson, krzysztof.kozlowski+dt, dmitry.baryshkov, Andy Gross, Konrad Dybcio, Mathieu Poirier On 08/10/2022 13:46, Sireesh Kodali wrote: > Add support for the Audio DSP PIL found on the Qualcomm MSM8953 > platform. The same configuration is used on all SoCs based on the > MSM8953 platform (SDM450, SDA450, SDM625, SDM632, APQ8053). > > Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> > --- > drivers/remoteproc/qcom_q6v5_pas.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c > index 6afd0941e552..70b3a37c4814 100644 > --- a/drivers/remoteproc/qcom_q6v5_pas.c > +++ b/drivers/remoteproc/qcom_q6v5_pas.c > @@ -950,6 +950,7 @@ static const struct of_device_id adsp_of_match[] = { > { .compatible = "qcom,msm8226-adsp-pil", .data = &adsp_resource_init}, > { .compatible = "qcom,msm8974-adsp-pil", .data = &adsp_resource_init}, > { .compatible = "qcom,msm8996-adsp-pil", .data = &msm8996_adsp_resource}, > + { .compatible = "qcom,msm8953-adsp-pil", .data = &msm8996_adsp_resource}, This one also in alphanumeric order, by compatible. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 1/2] remoteproc: qcom: pas: Add MSM8953 ADSP PIL support 2022-10-10 10:52 ` Krzysztof Kozlowski @ 2022-10-12 18:01 ` Sireesh Kodali 0 siblings, 0 replies; 6+ messages in thread From: Sireesh Kodali @ 2022-10-12 18:01 UTC (permalink / raw) To: Krzysztof Kozlowski, devicetree, linux-arm-msm, linux-remoteproc, ~postmarketos/upstreaming, linux-kernel Cc: andersson, krzysztof.kozlowski+dt, dmitry.baryshkov, Andy Gross, Konrad Dybcio, Mathieu Poirier On Mon Oct 10, 2022 at 4:22 PM IST, Krzysztof Kozlowski wrote: > On 08/10/2022 13:46, Sireesh Kodali wrote: > > Add support for the Audio DSP PIL found on the Qualcomm MSM8953 > > platform. The same configuration is used on all SoCs based on the > > MSM8953 platform (SDM450, SDA450, SDM625, SDM632, APQ8053). > > > > Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> > > --- > > drivers/remoteproc/qcom_q6v5_pas.c | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c > > index 6afd0941e552..70b3a37c4814 100644 > > --- a/drivers/remoteproc/qcom_q6v5_pas.c > > +++ b/drivers/remoteproc/qcom_q6v5_pas.c > > @@ -950,6 +950,7 @@ static const struct of_device_id adsp_of_match[] = { > > { .compatible = "qcom,msm8226-adsp-pil", .data = &adsp_resource_init}, > > { .compatible = "qcom,msm8974-adsp-pil", .data = &adsp_resource_init}, > > { .compatible = "qcom,msm8996-adsp-pil", .data = &msm8996_adsp_resource}, > > + { .compatible = "qcom,msm8953-adsp-pil", .data = &msm8996_adsp_resource}, > > This one also in alphanumeric order, by compatible. Will be fixed in the next iteration Regards, Sireesh Kodali > > > Best regards, > Krzysztof ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3 2/2] dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953 2022-10-08 17:46 [PATCH v3 0/2] remoteproc: qcom: Add support for MSM8953 ADSP Sireesh Kodali 2022-10-08 17:46 ` [PATCH v3 1/2] remoteproc: qcom: pas: Add MSM8953 ADSP PIL support Sireesh Kodali @ 2022-10-08 17:46 ` Sireesh Kodali 2022-10-10 10:51 ` Krzysztof Kozlowski 1 sibling, 1 reply; 6+ messages in thread From: Sireesh Kodali @ 2022-10-08 17:46 UTC (permalink / raw) To: devicetree, linux-arm-msm, linux-remoteproc, ~postmarketos/upstreaming, linux-kernel Cc: andersson, krzysztof.kozlowski+dt, dmitry.baryshkov, Sireesh Kodali, Andy Gross, Konrad Dybcio, Mathieu Poirier, Rob Herring, Manivannan Sadhasivam Add support for booting the Audio DSP on the MSM8953 platform. This is used by SoCs like SDM450, SDM625, SDM626, APQ8053, etc. Since the configuration is the same on all SoCs, a single compatible string is used. Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> --- Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml index 3072af5f9d79..9731ccb336f4 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml @@ -17,6 +17,7 @@ properties: compatible: enum: - qcom,msm8226-adsp-pil + - qcom,msm8953-adsp-pil - qcom,msm8974-adsp-pil - qcom,msm8996-adsp-pil - qcom,msm8996-slpi-pil @@ -178,6 +179,7 @@ allOf: contains: enum: - qcom,msm8226-adsp-pil + - qcom,msm8953-adsp-pil - qcom,msm8974-adsp-pil - qcom,msm8996-adsp-pil - qcom,msm8996-slpi-pil @@ -297,6 +299,7 @@ allOf: contains: enum: - qcom,msm8226-adsp-pil + - qcom,msm8953-adsp-pil - qcom,msm8974-adsp-pil - qcom,msm8996-adsp-pil - qcom,msm8996-slpi-pil @@ -369,6 +372,7 @@ allOf: contains: enum: - qcom,msm8226-adsp-pil + - qcom,msm8953-adsp-pil - qcom,msm8996-adsp-pil - qcom,msm8998-adsp-pas - qcom,sm8150-adsp-pas @@ -558,6 +562,7 @@ allOf: contains: enum: - qcom,msm8226-adsp-pil + - qcom,msm8953-adsp-pil - qcom,msm8974-adsp-pil - qcom,msm8996-adsp-pil - qcom,msm8996-slpi-pil -- 2.37.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953 2022-10-08 17:46 ` [PATCH v3 2/2] dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953 Sireesh Kodali @ 2022-10-10 10:51 ` Krzysztof Kozlowski 0 siblings, 0 replies; 6+ messages in thread From: Krzysztof Kozlowski @ 2022-10-10 10:51 UTC (permalink / raw) To: Sireesh Kodali, devicetree, linux-arm-msm, linux-remoteproc, ~postmarketos/upstreaming, linux-kernel Cc: andersson, krzysztof.kozlowski+dt, dmitry.baryshkov, Andy Gross, Konrad Dybcio, Mathieu Poirier, Rob Herring, Manivannan Sadhasivam On 08/10/2022 13:46, Sireesh Kodali wrote: > Add support for booting the Audio DSP on the MSM8953 platform. This is > used by SoCs like SDM450, SDM625, SDM626, APQ8053, etc. Since the > configuration is the same on all SoCs, a single compatible string is > used. > > Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-10-12 18:02 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-10-08 17:46 [PATCH v3 0/2] remoteproc: qcom: Add support for MSM8953 ADSP Sireesh Kodali 2022-10-08 17:46 ` [PATCH v3 1/2] remoteproc: qcom: pas: Add MSM8953 ADSP PIL support Sireesh Kodali 2022-10-10 10:52 ` Krzysztof Kozlowski 2022-10-12 18:01 ` Sireesh Kodali 2022-10-08 17:46 ` [PATCH v3 2/2] dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953 Sireesh Kodali 2022-10-10 10:51 ` Krzysztof Kozlowski
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).