* [PATCH AUTOSEL 4.14 1/7] ARM: dts: imx7d-sdb: config the max pressure for tsc2046
@ 2022-10-11 14:54 Sasha Levin
2022-10-11 14:54 ` [PATCH AUTOSEL 4.14 3/7] ARM: dts: imx6q: add missing properties for sram Sasha Levin
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Sasha Levin @ 2022-10-11 14:54 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Haibo Chen, Shawn Guo, Sasha Levin, robh+dt, devicetree,
linux-arm-kernel
From: Haibo Chen <haibo.chen@nxp.com>
[ Upstream commit e7c4ebe2f9cd68588eb24ba4ed122e696e2d5272 ]
Use the general touchscreen method to config the max pressure for
touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for
ABS_PRESSURE, when config the same max and min value, weston will
meet the following issue,
[17:19:39.183] event1 - ADS7846 Touchscreen: is tagged by udev as: Touchscreen
[17:19:39.183] event1 - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE
[17:19:39.183] event1 - ADS7846 Touchscreen: was rejected
[17:19:39.183] event1 - not using input device '/dev/input/event1'
This will then cause the APP weston-touch-calibrator can't list touch devices.
root@imx6ul7d:~# weston-touch-calibrator
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
No devices listed.
And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max"
belong to the deprecated properties, so remove them. Also for "ti,x-min",
"ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default
value in driver, so are redundant, also remove here.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx7d-sdb.dts | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 255e64ba32e2..7cf6557f4afc 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -179,12 +179,7 @@ tsc2046@0 {
interrupt-parent = <&gpio2>;
interrupts = <29 0>;
pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
- ti,x-min = /bits/ 16 <0>;
- ti,x-max = /bits/ 16 <0>;
- ti,y-min = /bits/ 16 <0>;
- ti,y-max = /bits/ 16 <0>;
- ti,pressure-max = /bits/ 16 <0>;
- ti,x-plate-ohms = /bits/ 16 <400>;
+ touchscreen-max-pressure = <255>;
wakeup-source;
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH AUTOSEL 4.14 3/7] ARM: dts: imx6q: add missing properties for sram
2022-10-11 14:54 [PATCH AUTOSEL 4.14 1/7] ARM: dts: imx7d-sdb: config the max pressure for tsc2046 Sasha Levin
@ 2022-10-11 14:54 ` Sasha Levin
2022-10-11 14:54 ` [PATCH AUTOSEL 4.14 4/7] ARM: dts: imx6dl: " Sasha Levin
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2022-10-11 14:54 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alexander Stein, Shawn Guo, Sasha Levin, robh+dt, devicetree,
linux-arm-kernel
From: Alexander Stein <alexander.stein@ew.tq-group.com>
[ Upstream commit b11d083c5dcec7c42fe982c854706d404ddd3a5f ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6q.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 4747ede61acd..7b335e8050d3 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -82,6 +82,9 @@ soc {
ocram: sram@00900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x40000>;
+ ranges = <0 0x00900000 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
--
2.35.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH AUTOSEL 4.14 4/7] ARM: dts: imx6dl: add missing properties for sram
2022-10-11 14:54 [PATCH AUTOSEL 4.14 1/7] ARM: dts: imx7d-sdb: config the max pressure for tsc2046 Sasha Levin
2022-10-11 14:54 ` [PATCH AUTOSEL 4.14 3/7] ARM: dts: imx6q: add missing properties for sram Sasha Levin
@ 2022-10-11 14:54 ` Sasha Levin
2022-10-11 14:54 ` [PATCH AUTOSEL 4.14 5/7] ARM: dts: imx6qp: " Sasha Levin
2022-10-11 14:54 ` [PATCH AUTOSEL 4.14 6/7] ARM: dts: imx6sl: " Sasha Levin
3 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2022-10-11 14:54 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alexander Stein, Shawn Guo, Sasha Levin, robh+dt, devicetree,
linux-arm-kernel
From: Alexander Stein <alexander.stein@ew.tq-group.com>
[ Upstream commit f5848b95633d598bacf0500e0108dc5961af88c0 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6dl.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 8475e6cc59ac..71e7c87c7497 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -63,6 +63,9 @@ soc {
ocram: sram@00900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
+ ranges = <0 0x00900000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
--
2.35.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH AUTOSEL 4.14 5/7] ARM: dts: imx6qp: add missing properties for sram
2022-10-11 14:54 [PATCH AUTOSEL 4.14 1/7] ARM: dts: imx7d-sdb: config the max pressure for tsc2046 Sasha Levin
2022-10-11 14:54 ` [PATCH AUTOSEL 4.14 3/7] ARM: dts: imx6q: add missing properties for sram Sasha Levin
2022-10-11 14:54 ` [PATCH AUTOSEL 4.14 4/7] ARM: dts: imx6dl: " Sasha Levin
@ 2022-10-11 14:54 ` Sasha Levin
2022-10-11 14:54 ` [PATCH AUTOSEL 4.14 6/7] ARM: dts: imx6sl: " Sasha Levin
3 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2022-10-11 14:54 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alexander Stein, Shawn Guo, Sasha Levin, robh+dt, devicetree,
linux-arm-kernel
From: Alexander Stein <alexander.stein@ew.tq-group.com>
[ Upstream commit 088fe5237435ee2f7ed4450519b2ef58b94c832f ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@940000: '#address-cells' is a required property
sram@940000: '#size-cells' is a required property
sram@940000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6qp.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index 299d863690c5..6cf0f9e18b70 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -47,12 +47,18 @@ soc {
ocram2: sram@00940000 {
compatible = "mmio-sram";
reg = <0x00940000 0x20000>;
+ ranges = <0 0x00940000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
ocram3: sram@00960000 {
compatible = "mmio-sram";
reg = <0x00960000 0x20000>;
+ ranges = <0 0x00960000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
--
2.35.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH AUTOSEL 4.14 6/7] ARM: dts: imx6sl: add missing properties for sram
2022-10-11 14:54 [PATCH AUTOSEL 4.14 1/7] ARM: dts: imx7d-sdb: config the max pressure for tsc2046 Sasha Levin
` (2 preceding siblings ...)
2022-10-11 14:54 ` [PATCH AUTOSEL 4.14 5/7] ARM: dts: imx6qp: " Sasha Levin
@ 2022-10-11 14:54 ` Sasha Levin
3 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2022-10-11 14:54 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alexander Stein, Shawn Guo, Sasha Levin, robh+dt, devicetree,
linux-arm-kernel
From: Alexander Stein <alexander.stein@ew.tq-group.com>
[ Upstream commit 60c9213a1d9941a8b33db570796c3f9be8984974 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6sl.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index bd9308b222ba..c8613ccd0944 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -112,6 +112,9 @@ soc {
ocram: sram@00900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
+ ranges = <0 0x00900000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
clocks = <&clks IMX6SL_CLK_OCRAM>;
};
--
2.35.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-10-11 15:22 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-10-11 14:54 [PATCH AUTOSEL 4.14 1/7] ARM: dts: imx7d-sdb: config the max pressure for tsc2046 Sasha Levin
2022-10-11 14:54 ` [PATCH AUTOSEL 4.14 3/7] ARM: dts: imx6q: add missing properties for sram Sasha Levin
2022-10-11 14:54 ` [PATCH AUTOSEL 4.14 4/7] ARM: dts: imx6dl: " Sasha Levin
2022-10-11 14:54 ` [PATCH AUTOSEL 4.14 5/7] ARM: dts: imx6qp: " Sasha Levin
2022-10-11 14:54 ` [PATCH AUTOSEL 4.14 6/7] ARM: dts: imx6sl: " Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).