devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Arnaud Pouliquen <arnaud.pouliquen@st.com>
Cc: alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] ASoC: dt-bindings: Convert dmic-codec to DT schema
Date: Tue, 11 Oct 2022 13:41:19 -0500	[thread overview]
Message-ID: <20221011184119.3754096-1-robh@kernel.org> (raw)

Convert the dmic-codec binding to DT schema format.

The '#sound-dai-cells' and 'sound-name-prefix' properties were not
documented, but are in use, so add them.

Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/sound/dmic-codec.yaml | 55 +++++++++++++++++++
 .../devicetree/bindings/sound/dmic.txt        | 22 --------
 2 files changed, 55 insertions(+), 22 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/dmic-codec.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/dmic.txt

diff --git a/Documentation/devicetree/bindings/sound/dmic-codec.yaml b/Documentation/devicetree/bindings/sound/dmic-codec.yaml
new file mode 100644
index 000000000000..767152fa99cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/dmic-codec.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dmic-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic PDM Digital microphone (DMIC) codec
+
+maintainers:
+  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  compatible:
+    const: dmic-codec
+
+  '#sound-dai-cells':
+    const: 0
+
+  dmicen-gpios:
+    description: GPIO specifier for DMIC to control start and stop
+    maxItems: 1
+
+  num-channels:
+    description: Number of microphones on this DAI
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
+    default: 8
+
+  modeswitch-delay-ms:
+    description: Delay (in ms) to complete DMIC mode switch
+
+  wakeup-delay-ms:
+    description: Delay (in ms) after enabling the DMIC
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio.h>
+
+    dmic {
+        compatible = "dmic-codec";
+        dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+        num-channels = <1>;
+        wakeup-delay-ms <50>;
+        modeswitch-delay-ms <35>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/dmic.txt b/Documentation/devicetree/bindings/sound/dmic.txt
deleted file mode 100644
index 32e871037269..000000000000
--- a/Documentation/devicetree/bindings/sound/dmic.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Device-Tree bindings for Digital microphone (DMIC) codec
-
-This device support generic PDM digital microphone.
-
-Required properties:
-	- compatible: should be "dmic-codec".
-
-Optional properties:
-	- dmicen-gpios: GPIO specifier for dmic to control start and stop
-	- num-channels: Number of microphones on this DAI
-	- wakeup-delay-ms: Delay (in ms) after enabling the DMIC
-	- modeswitch-delay-ms: Delay (in ms) to complete DMIC mode switch
-
-Example node:
-
-	dmic_codec: dmic@0 {
-		compatible = "dmic-codec";
-		dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
-		num-channels = <1>;
-		wakeup-delay-ms <50>;
-		modeswitch-delay-ms <35>;
-	};
-- 
2.35.1


             reply	other threads:[~2022-10-11 18:41 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-11 18:41 Rob Herring [this message]
2022-10-12  0:01 ` [PATCH] ASoC: dt-bindings: Convert dmic-codec to DT schema Rob Herring
2022-10-12  9:15 ` Arnaud POULIQUEN
2022-10-24 12:54 ` Mark Brown
  -- strict thread matches above, loose matches on Subject: below --
2022-10-21 17:57 Rob Herring
2022-10-24 12:54 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221011184119.3754096-1-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=arnaud.pouliquen@st.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).