From: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
To: <alexandre.torgue@foss.st.com>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>
Cc: <amelie.delaunay@foss.st.com>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<fabrice.gasnier@foss.st.com>
Subject: [PATCH 00/10] Add support for USB on STM32MP13
Date: Fri, 14 Oct 2022 10:31:57 +0200 [thread overview]
Message-ID: <20221014083207.20457-1-fabrice.gasnier@foss.st.com> (raw)
Add support for USBPHYC, USB Host and USB OTG on STM32MP13.
Enable all these interfaces on STM32MP135F-DK board.
Enable the STM32G0 UCSI driver as module.
Dependency on PWR and PMIC regulator is tempoarily managed by using
fixed regulators (resp in the SoC dtsi and the board dts files).
The USB support is functional when these regulators gets enabled at
boot time before entering the kernel.
Amelie Delaunay (5):
ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131
ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131
ARM: dts: stm32: add USB OTG HS support on stm32mp131
ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk
ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk
Fabrice Gasnier (5):
ARM: dts: stm32: add PWR fixed regulators on stm32mp131
ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk
ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk
ARM: multi_v7_defconfig: enable Type-C UCSI and STM32G0 as modules
arch/arm/boot/dts/stm32mp13-pinctrl.dtsi | 7 ++
arch/arm/boot/dts/stm32mp131.dtsi | 81 ++++++++++++++++++++
arch/arm/boot/dts/stm32mp135f-dk.dts | 95 ++++++++++++++++++++++++
arch/arm/configs/multi_v7_defconfig | 2 +
4 files changed, 185 insertions(+)
--
2.25.1
next reply other threads:[~2022-10-14 8:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-14 8:31 Fabrice Gasnier [this message]
-- strict thread matches above, loose matches on Subject: below --
2022-10-14 9:26 [PATCH 00/10] Add support for USB on STM32MP13 Fabrice Gasnier
2022-10-14 14:01 ` Fabrice Gasnier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221014083207.20457-1-fabrice.gasnier@foss.st.com \
--to=fabrice.gasnier@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=amelie.delaunay@foss.st.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).