From: Caleb Connolly <caleb@connolly.tech>
To: caleb@connolly.tech
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
devicetree@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>
Subject: [PATCH 2/7] arm64: dts: qcom: sdm845-cheza: commonize uart6 pinconf
Date: Sun, 16 Oct 2022 14:33:53 +0000 [thread overview]
Message-ID: <20221016143300.1738550-3-caleb@connolly.tech> (raw)
Use the new qup_uart6_4pin configuration in sd845.dtsi and fix alias
name.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 39 ++--------------------
1 file changed, 3 insertions(+), 36 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index b5eb8f7eca1d..a8ae6de51af4 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -16,7 +16,7 @@
/ {
aliases {
bluetooth0 = &bluetooth;
- hsuart0 = &uart6;
+ serial1 = &uart6;
serial0 = &uart9;
wifi0 = &wifi;
};
@@ -860,6 +860,8 @@ i2c_tunnel: i2c-tunnel {
&uart6 {
status = "okay";
+ pinctrl-0 = <&qup_uart6_4pin>;
+
bluetooth: wcn3990-bt {
compatible = "qcom,wcn3990-bt";
vddio-supply = <&src_pp1800_s4a>;
@@ -1079,41 +1081,6 @@ pinconf {
};
};
-&qup_uart6_default {
- /* Change pinmux to all 4 pins since CTS and RTS are connected */
- pinmux {
- pins = "gpio45", "gpio46",
- "gpio47", "gpio48";
- };
-
- pinconf-cts {
- /*
- * Configure a pull-down on 45 (CTS) to match the pull of
- * the Bluetooth module.
- */
- pins = "gpio45";
- bias-pull-down;
- };
-
- pinconf-rts-tx {
- /* We'll drive 46 (RTS) and 47 (TX), so no pull */
- pins = "gpio46", "gpio47";
- drive-strength = <2>;
- bias-disable;
- };
-
- pinconf-rx {
- /*
- * Configure a pull-up on 48 (RX). This is needed to avoid
- * garbage data when the TX pin of the Bluetooth module is
- * in tri-state (module powered off or not driving the
- * signal yet).
- */
- pins = "gpio48";
- bias-pull-up;
- };
-};
-
&qup_uart9_default {
pinconf-tx {
pins = "gpio4";
--
2.38.0
next reply other threads:[~2022-10-16 14:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-16 14:33 Caleb Connolly [this message]
2022-10-17 23:04 ` [PATCH 2/7] arm64: dts: qcom: sdm845-cheza: commonize uart6 pinconf Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221016143300.1738550-3-caleb@connolly.tech \
--to=caleb@connolly.tech \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox