[PATCH 1/2] mmc: mtk-sd: add Inline Crypto Engine support

[Mengqi Zhang <mengqi.zhang@mediatek.com>]

add crypto clock control and ungate it before CQHCI init.

Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 69d78604d1fc..8b6ef8691e5b 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -452,6 +452,7 @@ struct msdc_host {
 	struct clk *bus_clk;	/* bus clock which used to access register */
 	struct clk *src_clk_cg; /* msdc source clock control gate */
 	struct clk *sys_clk_cg;	/* msdc subsys clock control gate */
+	struct clk *crypto_clk; /* msdc crypto clock control gate */
 	struct clk_bulk_data bulk_clks[MSDC_NR_CLOCKS];
 	u32 mclk;		/* mmc subsystem clock frequency */
 	u32 src_clk_freq;	/* source clock frequency */
@@ -811,6 +812,7 @@ static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
 static void msdc_gate_clock(struct msdc_host *host)
 {
 	clk_bulk_disable_unprepare(MSDC_NR_CLOCKS, host->bulk_clks);
+	clk_disable_unprepare(host->crypto_clk);
 	clk_disable_unprepare(host->src_clk_cg);
 	clk_disable_unprepare(host->src_clk);
 	clk_disable_unprepare(host->bus_clk);
@@ -826,6 +828,7 @@ static int msdc_ungate_clock(struct msdc_host *host)
 	clk_prepare_enable(host->bus_clk);
 	clk_prepare_enable(host->src_clk);
 	clk_prepare_enable(host->src_clk_cg);
+	clk_prepare_enable(host->crypto_clk);
 	ret = clk_bulk_prepare_enable(MSDC_NR_CLOCKS, host->bulk_clks);
 	if (ret) {
 		dev_err(host->dev, "Cannot enable pclk/axi/ahb clock gates\n");
@@ -2643,6 +2646,15 @@ static int msdc_drv_probe(struct platform_device *pdev)
 		goto host_free;
 	}
 
+	/* only eMMC has crypto property */
+	if (!(mmc->caps2 & MMC_CAP2_NO_MMC)) {
+		host->crypto_clk = devm_clk_get_optional(&pdev->dev, "crypto");
+		if (IS_ERR(host->crypto_clk))
+			host->crypto_clk = NULL;
+		else
+			mmc->caps2 |= MMC_CAP2_CRYPTO;
+	}
+
 	host->irq = platform_get_irq(pdev, 0);
 	if (host->irq < 0) {
 		ret = -EINVAL;
-- 
2.25.1