devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tinghan Shen <tinghan.shen@mediatek.com>
To: Ryder Lee <ryder.lee@mediatek.com>,
	Jianjun Wang <jianjun.wang@mediatek.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Matthias Brugger <matthias.bgg@gmail.com>
Cc: <linux-pci@vger.kernel.org>, <linux-mediatek@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>,
	Tinghan Shen <tinghan.shen@mediatek.com>
Subject: [PATCH v2 2/3] arm64: dts: mt8195: Add pcie and pcie phy nodes
Date: Thu, 20 Oct 2022 19:19:24 +0800	[thread overview]
Message-ID: <20221020111925.30002-3-tinghan.shen@mediatek.com> (raw)
In-Reply-To: <20221020111925.30002-1-tinghan.shen@mediatek.com>

Add pcie and pcie phy nodes for mt8195.

Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 150 +++++++++++++++++++++++
 1 file changed, 150 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index d03f0c2b8233..2128fa007480 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/power/mt8195-power.h>
+#include <dt-bindings/reset/mt8195-resets.h>
 
 / {
 	compatible = "mediatek,mt8195";
@@ -1182,6 +1183,110 @@
 			status = "disabled";
 		};
 
+		pcie0: pcie@112f0000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f0000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x20000000
+				  0x0 0x20000000 0 0x200000>,
+				 <0x82000000 0 0x20200000
+				  0x0 0x20200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE0 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P0>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_26M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_32K>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
+
+			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>;
+			reset-names = "mac";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@112f8000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f8000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x24000000
+				  0x0 0x24000000 0 0x200000>,
+				 <0x82000000 0 0x24200000
+				  0x0 0x24200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE1 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P1>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 /* Designer has connect pcie1 with peri_mem_p0 clock */
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL_P1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&u3port1 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
+
+			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>;
+			reset-names = "mac";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
 		nor_flash: spi@1132c000 {
 			compatible = "mediatek,mt8195-nor",
 				     "mediatek,mt8173-nor";
@@ -1241,6 +1346,34 @@
 				reg = <0x189 0x2>;
 				bits = <7 5>;
 			};
+			pciephy_rx_ln1: pciephy-rx-ln1@190 {
+				reg = <0x190 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln1_nmos: pciephy-tx-ln1-nmos@190 {
+				reg = <0x190 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln1_pmos: pciephy-tx-ln1-pmos@191 {
+				reg = <0x191 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_rx_ln0: pciephy-rx-ln0@191 {
+				reg = <0x191 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln0_nmos: pciephy-tx-ln0-nmos@192,1 {
+				reg = <0x192 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln0_pmos: pciephy-tx-ln0-pmos@192,2 {
+				reg = <0x192 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_glb_intr: pciephy-glb-intr@193 {
+				reg = <0x193 0x1>;
+				bits = <0 4>;
+			};
 		};
 
 		u3phy2: t-phy@11c40000 {
@@ -1461,6 +1594,23 @@
 			};
 		};
 
+		pciephy: phy@11e80000 {
+			compatible = "mediatek,mt8195-pcie-phy";
+			reg = <0 0x11e80000 0 0x10000>;
+			reg-names = "sif";
+			nvmem-cells = <&pciephy_glb_intr>, <&pciephy_tx_ln0_pmos>,
+				      <&pciephy_tx_ln0_nmos>, <&pciephy_rx_ln0>,
+				      <&pciephy_tx_ln1_pmos>, <&pciephy_tx_ln1_nmos>,
+				      <&pciephy_rx_ln1>;
+			nvmem-cell-names = "glb_intr", "tx_ln0_pmos",
+					   "tx_ln0_nmos", "rx_ln0",
+					   "tx_ln1_pmos", "tx_ln1_nmos",
+					   "rx_ln1";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_PHY>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		ufsphy: ufs-phy@11fa0000 {
 			compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy";
 			reg = <0 0x11fa0000 0 0xc000>;
-- 
2.18.0


  parent reply	other threads:[~2022-10-20 11:19 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-20 11:19 [PATCH v2 0/3] Add driver nodes for MT8195 SoC Tinghan Shen
2022-10-20 11:19 ` [PATCH v2 1/3] dt-bindings: PCI: mediatek-gen3: Support mt8195 Tinghan Shen
2022-10-21  2:26   ` Rob Herring
2022-10-21  3:27     ` Jianjun Wang
2022-10-20 11:19 ` Tinghan Shen [this message]
2022-10-20 11:19 ` [PATCH v2 3/3] arm64: dts: mt8195: Add venc node Tinghan Shen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221020111925.30002-3-tinghan.shen@mediatek.com \
    --to=tinghan.shen@mediatek.com \
    --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jianjun.wang@mediatek.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=ryder.lee@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).