From: Rob Herring <robh@kernel.org>
To: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: netdev@vger.kernel.org, nbd@nbd.name, john@phrozen.org,
sean.wang@mediatek.com, Mark-MC.Lee@mediatek.com,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, matthias.bgg@gmail.com,
linux-mediatek@lists.infradead.org, lorenzo.bianconi@redhat.com,
Bo.Jiao@mediatek.com, sujuan.chen@mediatek.com,
ryder.Lee@mediatek.com, evelyn.tsai@mediatek.com,
devicetree@vger.kernel.org, daniel@makrotopia.org
Subject: Re: [PATCH net-next 2/6] dt-bindings: net: mediatek: add WED RX binding for MT7986 eth driver
Date: Fri, 21 Oct 2022 17:41:40 -0500 [thread overview]
Message-ID: <20221021224140.GA574155-robh@kernel.org> (raw)
In-Reply-To: <7a454984f0001a71964114b71f353cb47af95ee6.1666368566.git.lorenzo@kernel.org>
On Fri, Oct 21, 2022 at 06:18:32PM +0200, Lorenzo Bianconi wrote:
> Document the binding for the RX Wireless Ethernet Dispatch core on the
> MT7986 ethernet driver used to offload traffic received by WLAN NIC and
> forwarded to LAN/WAN one.
>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> ---
> .../arm/mediatek/mediatek,mt7622-wed.yaml | 126 ++++++++++++++++++
> .../arm/mediatek/mediatek,mt7986-wo-boot.yaml | 45 +++++++
> .../arm/mediatek/mediatek,mt7986-wo-ccif.yaml | 49 +++++++
> .../arm/mediatek/mediatek,mt7986-wo-dlm.yaml | 66 +++++++++
> 4 files changed, 286 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-dlm.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
> index 84fb0a146b6e..623f11df5545 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
> @@ -29,6 +29,59 @@ properties:
> interrupts:
> maxItems: 1
>
> + mediatek,wocpu_emi:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + maxItems: 1
> + description:
> + Phandle to a node describing reserved memory used by mtk wed firmware
> + (see bindings/reserved-memory/reserved-memory.txt)
What does that file contain?
There's a standard property to refer to reserved-memory nodes, use it.
> +
> + mediatek,wocpu_data:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + maxItems: 1
> + description:
> + Phandle to a node describing reserved memory used by mtk wed firmware
> + (see bindings/reserved-memory/reserved-memory.txt)
> +
> + mediatek,wocpu_ilm:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + maxItems: 1
> + description:
> + Phandle to a node describing memory used by mtk wed firmware
> +
> + mediatek,ap2woccif:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + maxItems: 1
> + description:
> + Phandle to the mediatek wed-wo controller.
> +
> + mediatek,wocpu_boot:
s/_/-/
> + $ref: /schemas/types.yaml#/definitions/phandle
> + maxItems: 1
> + description:
> + Phandle to the mediatek wed-wo boot interface.
> +
> + mediatek,wocpu_dlm:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + maxItems: 1
> + description:
> + Phandle to the mediatek wed-wo rx hw ring.
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: mediatek,mt7986-wed
> + then:
> + properties:
> + mediatek,wocpu_data: true
> + mediatek,wocpu_boot: true
> + mediatek,wocpu_emi: true
> + mediatek,wocpu_ilm: true
> + mediatek,ap2woccif: true
> + mediatek,wocpu_dlm: true
> +
> required:
> - compatible
> - reg
> @@ -49,3 +102,76 @@ examples:
> interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
> };
> };
> +
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/reset/ti-syscon.h>
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + wocpu0_emi: wocpu0_emi@4fd00000 {
> + reg = <0 0x4fd00000 0 0x40000>;
> + no-map;
> + };
> +
> + wocpu_data: wocpu_data@4fd80000 {
> + reg = <0 0x4fd80000 0 0x240000>;
> + no-map;
> + };
> + };
> +
> + ethsys: syscon@15000000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "mediatek,mt7986-ethsys", "syscon";
> + reg = <0 0x15000000 0 0x1000>;
> +
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + ethsysrst: reset-controller {
> + compatible = "ti,syscon-reset";
> + #reset-cells = <1>;
> + ti,reset-bits = <0x34 4 0x34 4 0x34 4 (ASSERT_SET | DEASSERT_CLEAR | STATUS_SET)>;
> + };
You don't need to show providers in examples. Presumably we already have
an example of them in their binding.
> + };
> +
> + wocpu0_ilm: wocpu0_ilm@151e0000 {
> + compatible = "mediatek,wocpu0_ilm";
> + reg = <0 0x151e0000 0 0x8000>;
> + };
> +
> + cpu_boot: wocpu_boot@15194000 {
> + compatible = "mediatek,wocpu_boot", "syscon";
> + reg = <0 0x15194000 0 0x1000>;
> + };
> +
> + ap2woccif0: ap2woccif@151a5000 {
> + compatible = "mediatek,ap2woccif", "syscon";
> + reg = <0 0x151a5000 0 0x1000>;
> + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + wocpu0_dlm: wocpu_dlm@151e8000 {
> + compatible = "mediatek,wocpu_dlm";
> + reg = <0 0x151e8000 0 0x2000>;
> + resets = <ðsysrst 0>;
> + reset-names = "wocpu_rst";
> + };
> +
> + wed1: wed@1020a000 {
> + compatible = "mediatek,mt7986-wed","syscon";
> + reg = <0 0x15010000 0 0x1000>;
> + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
> +
> + mediatek,wocpu_data = <&wocpu_data>;
> + mediatek,ap2woccif = <&ap2woccif0>;
> + mediatek,wocpu_ilm = <&wocpu0_ilm>;
> + mediatek,wocpu_dlm = <&wocpu0_dlm>;
> + mediatek,wocpu_emi = <&wocpu_emi>;
> + mediatek,wocpu_boot = <&cpu_boot>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml
> new file mode 100644
> index 000000000000..dc8fdb706960
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wo-boot.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: MediaTek WED WO boot controller interface for MT7986
What is 'WED'?
> +
> +maintainers:
> + - Lorenzo Bianconi <lorenzo@kernel.org>
> + - Felix Fietkau <nbd@nbd.name>
> +
> +description:
> + The mediatek wo-boot provides a configuration interface for WED WO
> + boot controller on MT7986 soc.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - mediatek,wocpu_boot
This needs to be SoC specific.
And s/_/-/
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + cpu_boot: wocpu_boot@15194000 {
> + compatible = "mediatek,wocpu_boot", "syscon";
> + reg = <0 0x15194000 0 0x1000>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml
> new file mode 100644
> index 000000000000..8fea86425983
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wo-ccif.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: MediaTek WED WO Controller for MT7986
> +
> +maintainers:
> + - Lorenzo Bianconi <lorenzo@kernel.org>
> + - Felix Fietkau <nbd@nbd.name>
> +
> +description:
> + The mediatek WO-ccif provides a configuration interface for WED WO
> + controller on MT7986 soc.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - mediatek,ap2woccif
SoC specific.
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ap2woccif0: ap2woccif@151a5000 {
> + compatible = "mediatek,ap2woccif", "syscon";
> + reg = <0 0x151a5000 0 0x1000>;
> + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-dlm.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-dlm.yaml
> new file mode 100644
> index 000000000000..529343c57e4b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-dlm.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wo-dlm.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: MediaTek WED WO hw rx ring interface for MT7986
> +
> +maintainers:
> + - Lorenzo Bianconi <lorenzo@kernel.org>
> + - Felix Fietkau <nbd@nbd.name>
> +
> +description:
> + The mediatek WO-dlm provides a configuration interface for WED WO
> + rx ring on MT7986 soc.
> +
> +properties:
> + compatible:
> + const: mediatek,wocpu_dlm
Soc specific
s/_/-/
> +
> + reg:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> + reset-names:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - resets
> + - reset-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/reset/ti-syscon.h>
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + ethsys: syscon@15000000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "mediatek,mt7986-ethsys", "syscon";
> + reg = <0 0x15000000 0 0x1000>;
> +
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + ethsysrst: reset-controller {
> + compatible = "ti,syscon-reset";
> + #reset-cells = <1>;
> + ti,reset-bits = <0x34 4 0x34 4 0x34 4 (ASSERT_SET | DEASSERT_CLEAR | STATUS_SET)>;
> + };
> + };
Again, don't need the provider here.
> +
> + wocpu0_dlm: wocpu_dlm@151e8000 {
> + compatible = "mediatek,wocpu_dlm";
> + reg = <0 0x151e8000 0 0x2000>;
> + resets = <ðsysrst 0>;
> + reset-names = "wocpu_rst";
> + };
> + };
> --
> 2.37.3
>
>
next prev parent reply other threads:[~2022-10-21 22:41 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-21 16:18 [PATCH net-next 0/6] introduce WED RX support to MT7986 SoC Lorenzo Bianconi
2022-10-21 16:18 ` [PATCH net-next 1/6] arm64: dts: mediatek: mt7986: add support for RX Wireless Ethernet Dispatch Lorenzo Bianconi
2022-10-22 16:03 ` kernel test robot
2022-10-22 23:17 ` kernel test robot
2022-10-21 16:18 ` [PATCH net-next 2/6] dt-bindings: net: mediatek: add WED RX binding for MT7986 eth driver Lorenzo Bianconi
2022-10-21 21:00 ` Rob Herring
2022-10-21 22:41 ` Rob Herring [this message]
2022-10-23 15:48 ` Lorenzo Bianconi
2022-10-28 23:43 ` Krzysztof Kozlowski
2022-10-21 16:18 ` [PATCH net-next 3/6] net: ethernet: mtk_wed: introduce wed mcu support Lorenzo Bianconi
2022-10-22 5:17 ` kernel test robot
2022-10-21 16:18 ` [PATCH net-next 4/6] net: ethernet: mtk_wed: introduce wed wo support Lorenzo Bianconi
2022-10-21 16:18 ` [PATCH net-next 5/6] net: ethernet: mtk_wed: add configure " Lorenzo Bianconi
2022-10-21 16:18 ` [PATCH net-next 6/6] net: ethernet: mtk_wed: add rx mib counters Lorenzo Bianconi
2022-10-22 4:10 ` [PATCH net-next 0/6] introduce WED RX support to MT7986 SoC Jakub Kicinski
2022-10-23 17:25 ` Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221021224140.GA574155-robh@kernel.org \
--to=robh@kernel.org \
--cc=Bo.Jiao@mediatek.com \
--cc=Mark-MC.Lee@mediatek.com \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=evelyn.tsai@mediatek.com \
--cc=john@phrozen.org \
--cc=kuba@kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=lorenzo@kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=nbd@nbd.name \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=ryder.Lee@mediatek.com \
--cc=sean.wang@mediatek.com \
--cc=sujuan.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).