From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Stephen Boyd <swboyd@chromium.org>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org,
Rob Herring <robh@kernel.org>
Subject: [PATCH v9 12/12] dt-bindings: display/msm: add support for the display on SM8250
Date: Mon, 24 Oct 2022 19:42:25 +0300 [thread overview]
Message-ID: <20221024164225.3236654-13-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20221024164225.3236654-1-dmitry.baryshkov@linaro.org>
Add DPU and MDSS schemas to describe MDSS and DPU blocks on the Qualcomm
SM8250 platform.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../bindings/display/msm/mdss-common.yaml | 4 +-
.../bindings/display/msm/qcom,sm8250-dpu.yaml | 92 +++++
.../display/msm/qcom,sm8250-mdss.yaml | 330 ++++++++++++++++++
3 files changed, 424 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
index 2a476bd0215e..27d7242657b2 100644
--- a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
+++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
@@ -27,11 +27,11 @@ properties:
clocks:
minItems: 2
- maxItems: 3
+ maxItems: 4
clock-names:
minItems: 2
- maxItems: 3
+ maxItems: 4
interrupts:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
new file mode 100644
index 000000000000..9ff8a265c85f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Display DPU
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8250-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display ahb clock
+ - description: Display hf axi clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8250.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8250-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
new file mode 100644
index 000000000000..0d3be5386b3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
@@ -0,0 +1,330 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Display MDSS
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SM8250 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sm8250-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: nrt_bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8250-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8250.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8250-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+ <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x820 0x402>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8250-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@ae96400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0x0ae96400 0x200>,
+ <0x0ae96600 0x280>,
+ <0x0ae96900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+ };
+...
--
2.35.1
next prev parent reply other threads:[~2022-10-24 18:22 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-24 16:42 [PATCH v9 00/12] dt-bindings: display/msm: rework MDSS and DPU bindings Dmitry Baryshkov
2022-10-24 16:42 ` [PATCH v9 01/12] dt-bindings: display/msm: split qcom,mdss bindings Dmitry Baryshkov
2022-10-24 16:42 ` [PATCH v9 02/12] dt-bindings: display/msm: add gcc-bus clock to dpu-smd845 Dmitry Baryshkov
2022-10-24 16:42 ` [PATCH v9 03/12] dt-bindings: display/msm: add interconnects property to qcom,mdss-smd845 Dmitry Baryshkov
2022-10-24 16:42 ` [PATCH v9 04/12] dt-bindings: display/msm: move common DPU properties to dpu-common.yaml Dmitry Baryshkov
2022-11-08 11:03 ` Krzysztof Kozlowski
2022-10-24 16:42 ` [PATCH v9 05/12] dt-bindings: display/msm: move common MDSS properties to mdss-common.yaml Dmitry Baryshkov
2022-11-08 11:05 ` Krzysztof Kozlowski
2022-11-10 21:45 ` Dmitry Baryshkov
2022-11-11 7:56 ` Krzysztof Kozlowski
2022-10-24 16:42 ` [PATCH v9 06/12] dt-bindings: display/msm: split dpu-sc7180 into DPU and MDSS parts Dmitry Baryshkov
2022-10-24 16:42 ` [PATCH v9 07/12] dt-bindings: display/msm: split dpu-sc7280 " Dmitry Baryshkov
2022-10-24 16:42 ` [PATCH v9 08/12] dt-bindings: display/msm: split dpu-sdm845 " Dmitry Baryshkov
2022-10-24 16:42 ` [PATCH v9 09/12] dt-bindings: display/msm: split dpu-msm8998 " Dmitry Baryshkov
2022-10-24 16:42 ` [PATCH v9 10/12] dt-bindings: display/msm: split dpu-qcm2290 " Dmitry Baryshkov
2022-10-24 16:42 ` [PATCH v9 11/12] dt-bindings: display/msm: add missing device nodes to mdss-* schemas Dmitry Baryshkov
2022-10-24 16:42 ` Dmitry Baryshkov [this message]
2022-11-04 12:21 ` [PATCH v9 00/12] dt-bindings: display/msm: rework MDSS and DPU bindings Rob Herring
2022-11-04 13:05 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221024164225.3236654-13-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=quic_abhinavk@quicinc.com \
--cc=robdclark@gmail.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sean@poorly.run \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).