From: Rob Herring <robh@kernel.org>
To: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: netdev@vger.kernel.org, nbd@nbd.name, john@phrozen.org,
sean.wang@mediatek.com, Mark-MC.Lee@mediatek.com,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, matthias.bgg@gmail.com,
linux-mediatek@lists.infradead.org, lorenzo.bianconi@redhat.com,
Bo.Jiao@mediatek.com, sujuan.chen@mediatek.com,
ryder.Lee@mediatek.com, evelyn.tsai@mediatek.com,
devicetree@vger.kernel.org, daniel@makrotopia.org
Subject: Re: [PATCH v2 net-next 2/6] dt-bindings: net: mediatek: add WED RX binding for MT7986 eth driver
Date: Tue, 25 Oct 2022 17:52:48 -0500 [thread overview]
Message-ID: <20221025225248.GA3405306-robh@kernel.org> (raw)
In-Reply-To: <337ef332ca50e6a40f3fdceeb7262d91165c6323.1666549145.git.lorenzo@kernel.org>
On Sun, Oct 23, 2022 at 08:28:06PM +0200, Lorenzo Bianconi wrote:
> Document the binding for the RX Wireless Ethernet Dispatch core on the
> MT7986 ethernet driver used to offload traffic received by WLAN NIC and
> forwarded to LAN/WAN one.
>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> ---
> .../arm/mediatek/mediatek,mt7622-wed.yaml | 91 +++++++++++++++++++
> .../arm/mediatek/mediatek,mt7986-wo-boot.yaml | 46 ++++++++++
> .../arm/mediatek/mediatek,mt7986-wo-ccif.yaml | 49 ++++++++++
> .../arm/mediatek/mediatek,mt7986-wo-dlm.yaml | 50 ++++++++++
> 4 files changed, 236 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-dlm.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
> index 84fb0a146b6e..8e2905004790 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
> @@ -29,6 +29,41 @@ properties:
> interrupts:
> maxItems: 1
>
> + memory-region:
> + minItems: 3
> + maxItems: 3
What is each entry? Need to define them.
> + description:
> + phandles to nodes describing reserved memory used by mt7986-wed firmware
> + (see bindings/reserved-memory/reserved-memory.txt)
What does that document say?
(You don't need generic descriptions/refs of common properties)
> +
> + mediatek,wo-ccif:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to the mediatek wed-wo controller.
> +
> + mediatek,wo-boot:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to the mediatek wed-wo boot interface.
> +
> + mediatek,wo-dlm:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to the mediatek wed-wo rx hw ring.
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: mediatek,mt7986-wed
> + then:
> + properties:
> + mediatek,wo-boot: true
> + mediatek,wo-ccif: true
> + mediatek,wo-dlm: true
> + memory-region: true
This does nothing. You need the opposite? Disallow these properties for
7622?
> +
> required:
> - compatible
> - reg
> @@ -49,3 +84,59 @@ examples:
> interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
> };
> };
> +
> + - |
Why a new example?
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + wo_emi: wo-emi@4fd00000 {
> + reg = <0 0x4fd00000 0 0x40000>;
> + no-map;
> + };
> +
> + wo_data: wo-data@4fd80000 {
> + reg = <0 0x4fd80000 0 0x240000>;
> + no-map;
> + };
> +
> + wo_ilm: wo-ilm@151e0000 {
> + reg = <0 0x151e0000 0 0x8000>;
> + no-map;
> + };
> + };
Don't need to show /reserved-memory in examples.
> +
> + wo_boot: wo-boot@15194000 {
> + compatible = "mediatek,mt7986-wo-boot","syscon";
> + reg = <0 0x15194000 0 0x1000>;
> + };
> +
> + wo_ccif0: wo-ccif@151a5000 {
> + compatible = "mediatek,mt7986-wo-ccif","syscon";
> + reg = <0 0x151a5000 0 0x1000>;
> + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
> + };
Don't really need to show these either. You already have them in their
own schemas and we don't need 2 examples.
Didn't I already say this?
> +
> + wo_dlm0: wo-dlm@151e8000 {
> + compatible = "mediatek,mt7986-wo-dlm";
> + reg = <0 0x151e8000 0 0x2000>;
> + resets = <ðsysrst 0>;
> + reset-names = "wocpu_rst";
> + };
> +
> + wed1: wed@1020a000 {
> + compatible = "mediatek,mt7986-wed","syscon";
> + reg = <0 0x15010000 0 0x1000>;
> + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
> +
> + memory-region = <&wo_emi>, <&wo_data>, <&wo_ilm>;
> + mediatek,wo-ccif = <&wo_ccif0>;
> + mediatek,wo-boot = <&wo_boot>;
> + mediatek,wo-dlm = <&wo_dlm0>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml
> new file mode 100644
> index 000000000000..ce9c971e6604
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wo-boot.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title:
> + MediaTek Wireless Ethernet Dispatch WO boot controller interface for MT7986
> +
> +maintainers:
> + - Lorenzo Bianconi <lorenzo@kernel.org>
> + - Felix Fietkau <nbd@nbd.name>
> +
> +description:
> + The mediatek wo-boot provides a configuration interface for WED WO
> + boot controller on MT7986 soc.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - mediatek,mt7986-wo-boot
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + wo_boot: wo-boot@15194000 {
> + compatible = "mediatek,mt7986-wo-boot","syscon";
> + reg = <0 0x15194000 0 0x1000>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml
> new file mode 100644
> index 000000000000..48cb27bcc4cd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wo-ccif.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: MediaTek Wireless Ethernet Dispatch WO Controller for MT7986
> +
> +maintainers:
> + - Lorenzo Bianconi <lorenzo@kernel.org>
> + - Felix Fietkau <nbd@nbd.name>
> +
> +description:
> + The mediatek wo-ccif provides a configuration interface for WED WO
> + controller on MT7986 soc.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - mediatek,mt7986-wo-ccif
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + wo_ccif0: wo-ccif@151a5000 {
> + compatible = "mediatek,mt7986-wo-ccif","syscon";
> + reg = <0 0x151a5000 0 0x1000>;
> + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-dlm.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-dlm.yaml
> new file mode 100644
> index 000000000000..db9252598a42
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-dlm.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wo-dlm.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: MediaTek Wireless Ethernet Dispatch WO hw rx ring interface for MT7986
> +
> +maintainers:
> + - Lorenzo Bianconi <lorenzo@kernel.org>
> + - Felix Fietkau <nbd@nbd.name>
> +
> +description:
> + The mediatek wo-dlm provides a configuration interface for WED WO
> + rx ring on MT7986 soc.
> +
> +properties:
> + compatible:
> + const: mediatek,mt7986-wo-dlm
> +
> + reg:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> + reset-names:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - resets
> + - reset-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + wo_dlm0: wo-dlm@151e8000 {
> + compatible = "mediatek,mt7986-wo-dlm";
> + reg = <0 0x151e8000 0 0x2000>;
> + resets = <ðsysrst 0>;
> + reset-names = "wocpu_rst";
> + };
> + };
> --
> 2.37.3
>
>
next prev parent reply other threads:[~2022-10-25 22:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-23 18:28 [PATCH v2 net-next 0/6] introduce WED RX support to MT7986 SoC Lorenzo Bianconi
2022-10-23 18:28 ` [PATCH v2 net-next 1/6] arm64: dts: mediatek: mt7986: add support for RX Wireless Ethernet Dispatch Lorenzo Bianconi
2022-10-29 0:03 ` Krzysztof Kozlowski
2022-10-29 21:13 ` Lorenzo Bianconi
2022-10-23 18:28 ` [PATCH v2 net-next 2/6] dt-bindings: net: mediatek: add WED RX binding for MT7986 eth driver Lorenzo Bianconi
2022-10-25 22:52 ` Rob Herring [this message]
2022-10-26 10:37 ` Lorenzo Bianconi
2022-10-29 0:01 ` Krzysztof Kozlowski
2022-10-29 21:17 ` Lorenzo Bianconi
2022-10-23 18:28 ` [PATCH v2 net-next 3/6] net: ethernet: mtk_wed: introduce wed mcu support Lorenzo Bianconi
2022-10-23 18:28 ` [PATCH v2 net-next 4/6] net: ethernet: mtk_wed: introduce wed wo support Lorenzo Bianconi
2022-10-23 18:28 ` [PATCH v2 net-next 5/6] net: ethernet: mtk_wed: add configure " Lorenzo Bianconi
2022-10-23 18:28 ` [PATCH v2 net-next 6/6] net: ethernet: mtk_wed: add rx mib counters Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221025225248.GA3405306-robh@kernel.org \
--to=robh@kernel.org \
--cc=Bo.Jiao@mediatek.com \
--cc=Mark-MC.Lee@mediatek.com \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=evelyn.tsai@mediatek.com \
--cc=john@phrozen.org \
--cc=kuba@kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=lorenzo@kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=nbd@nbd.name \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=ryder.Lee@mediatek.com \
--cc=sean.wang@mediatek.com \
--cc=sujuan.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).