[PATCH v1 1/5] clk: qcom: dispcc-sm8250: Disable EDP_GTC for sm8350

[PATCH v1 1/5] clk: qcom: dispcc-sm8250: Disable EDP_GTC for sm8350

[Robert Foss]

SM8350 does not have the EDP_GTC clock, so let's disable it
for this SoC.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 drivers/clk/qcom/dispcc-sm8250.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
index 709076f0f9d7..180ac2726f7e 100644
--- a/drivers/clk/qcom/dispcc-sm8250.c
+++ b/drivers/clk/qcom/dispcc-sm8250.c
@@ -1330,6 +1330,9 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
 		disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000;
 		disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
 		disp_cc_pll1.vco_table = lucid_5lpe_vco;
+
+		disp_cc_sm8250_clocks[DISP_CC_MDSS_EDP_GTC_CLK] = NULL;
+		disp_cc_sm8250_clocks[DISP_CC_MDSS_EDP_GTC_CLK_SRC] = NULL;
 	}
 
 	clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
-- 
2.34.1

[PATCH v1 2/5] clk: qcom: dispcc-sm8250: Add RETAIN_FF_ENABLE flag for mdss_gdsc

[Robert Foss]

All SoC supported by this driver supports the RETAIN_FF_ENABLE flag,
so it should be enabled here.

This feature enables registers to maintain their state after
dis/re-enabling the GDSC.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 drivers/clk/qcom/dispcc-sm8250.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
index 180ac2726f7e..a7606580cf22 100644
--- a/drivers/clk/qcom/dispcc-sm8250.c
+++ b/drivers/clk/qcom/dispcc-sm8250.c
@@ -1137,7 +1137,7 @@ static struct gdsc mdss_gdsc = {
 		.name = "mdss_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
-	.flags = HW_CTRL,
+	.flags = HW_CTRL | RETAIN_FF_ENABLE,
 };
 
 static struct clk_regmap *disp_cc_sm8250_clocks[] = {
-- 
2.34.1

[PATCH v1 3/5] dt-bindings: clock: dispcc-sm8250: Add EDP_LINK_DIV_CLK_SRC index

[Robert Foss]

Add this previously missing index, since it is supported by the SoCs
targeted by the dispcc-sm8250 driver.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 include/dt-bindings/clock/qcom,dispcc-sm8250.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/clock/qcom,dispcc-sm8250.h b/include/dt-bindings/clock/qcom,dispcc-sm8250.h
index ce001cbbc27f..767fdb27e514 100644
--- a/include/dt-bindings/clock/qcom,dispcc-sm8250.h
+++ b/include/dt-bindings/clock/qcom,dispcc-sm8250.h
@@ -64,6 +64,7 @@
 #define DISP_CC_MDSS_EDP_LINK_INTF_CLK		54
 #define DISP_CC_MDSS_EDP_PIXEL_CLK		55
 #define DISP_CC_MDSS_EDP_PIXEL_CLK_SRC		56
+#define DISP_CC_MDSS_EDP_LINK_DIV_CLK_SRC	57
 
 /* DISP_CC Reset */
 #define DISP_CC_MDSS_CORE_BCR			0
-- 
2.34.1

[PATCH v1 4/5] clk: qcom: dispcc-sm8250: Add missing EDP clocks for sm8350

[Robert Foss]

SM8350 supports embedded displayport, but the clocks for this
were previously not enabled.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 drivers/clk/qcom/dispcc-sm8250.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
index a7606580cf22..d2aaa44ed3d4 100644
--- a/drivers/clk/qcom/dispcc-sm8250.c
+++ b/drivers/clk/qcom/dispcc-sm8250.c
@@ -462,6 +462,20 @@ static struct clk_branch disp_cc_mdss_edp_link_clk = {
 	},
 };
 
+static struct clk_regmap_div disp_cc_mdss_edp_link_div_clk_src = {
+	.reg = 0x2288,
+	.shift = 0,
+	.width = 2,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "disp_cc_mdss_edp_link_div_clk_src",
+		.parent_hws = (const struct clk_hw*[]){
+			&disp_cc_mdss_edp_link_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
 static struct clk_branch disp_cc_mdss_edp_link_intf_clk = {
 	.halt_reg = 0x2074,
 	.halt_check = BRANCH_HALT,
@@ -471,7 +485,7 @@ static struct clk_branch disp_cc_mdss_edp_link_intf_clk = {
 		.hw.init = &(struct clk_init_data){
 			.name = "disp_cc_mdss_edp_link_intf_clk",
 			.parent_hws = (const struct clk_hw*[]){
-				&disp_cc_mdss_edp_link_clk_src.clkr.hw,
+				&disp_cc_mdss_edp_link_div_clk_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.flags = CLK_GET_RATE_NOCACHE,
@@ -1175,6 +1189,7 @@ static struct clk_regmap *disp_cc_sm8250_clocks[] = {
 	[DISP_CC_MDSS_EDP_GTC_CLK_SRC] = &disp_cc_mdss_edp_gtc_clk_src.clkr,
 	[DISP_CC_MDSS_EDP_LINK_CLK] = &disp_cc_mdss_edp_link_clk.clkr,
 	[DISP_CC_MDSS_EDP_LINK_CLK_SRC] = &disp_cc_mdss_edp_link_clk_src.clkr,
+	[DISP_CC_MDSS_EDP_LINK_DIV_CLK_SRC] = &disp_cc_mdss_edp_link_div_clk_src.clkr,
 	[DISP_CC_MDSS_EDP_LINK_INTF_CLK] = &disp_cc_mdss_edp_link_intf_clk.clkr,
 	[DISP_CC_MDSS_EDP_PIXEL_CLK] = &disp_cc_mdss_edp_pixel_clk.clkr,
 	[DISP_CC_MDSS_EDP_PIXEL_CLK_SRC] = &disp_cc_mdss_edp_pixel_clk_src.clkr,
@@ -1285,7 +1300,11 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
 			&disp_cc_mdss_dp_pixel1_clk_src,
 			&disp_cc_mdss_dp_pixel2_clk_src,
 			&disp_cc_mdss_dp_pixel_clk_src,
+			&disp_cc_mdss_edp_aux_clk_src,
+			&disp_cc_mdss_edp_link_clk_src,
+			&disp_cc_mdss_edp_pixel_clk_src,
 			&disp_cc_mdss_esc0_clk_src,
+			&disp_cc_mdss_esc1_clk_src,
 			&disp_cc_mdss_mdp_clk_src,
 			&disp_cc_mdss_pclk0_clk_src,
 			&disp_cc_mdss_pclk1_clk_src,
@@ -1297,6 +1316,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
 			&disp_cc_mdss_byte1_div_clk_src,
 			&disp_cc_mdss_dp_link1_div_clk_src,
 			&disp_cc_mdss_dp_link_div_clk_src,
+			&disp_cc_mdss_edp_link_div_clk_src,
 		};
 		unsigned int i;
 		static bool offset_applied;
-- 
2.34.1

[PATCH v1 5/5] clk: qcom: dispcc-sm8250: Disable link_div_clk_src for sm8150

[Robert Foss]

SM8150 does not have any of the link_div_clk_src clocks, so
let's disable them for this SoC.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 drivers/clk/qcom/dispcc-sm8250.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
index d2aaa44ed3d4..f6f719616f63 100644
--- a/drivers/clk/qcom/dispcc-sm8250.c
+++ b/drivers/clk/qcom/dispcc-sm8250.c
@@ -1289,6 +1289,10 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
 		disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
 		disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
 		disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
+
+		disp_cc_sm8250_clocks[DISP_CC_MDSS_DP_LINK1_DIV_CLK_SRC] = NULL;
+		disp_cc_sm8250_clocks[DISP_CC_MDSS_DP_LINK_DIV_CLK_SRC] = NULL;
+		disp_cc_sm8250_clocks[DISP_CC_MDSS_EDP_LINK_DIV_CLK_SRC] = NULL;
 	} else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
 		static struct clk_rcg2 * const rcgs[] = {
 			&disp_cc_mdss_byte0_clk_src,
-- 
2.34.1

Re: [PATCH v1 5/5] clk: qcom: dispcc-sm8250: Disable link_div_clk_src for sm8150

[Dmitry Baryshkov]

On 27/10/2022 15:34, Robert Foss wrote:
> SM8150 does not have any of the link_div_clk_src clocks, so
> let's disable them for this SoC.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>   drivers/clk/qcom/dispcc-sm8250.c | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
> index d2aaa44ed3d4..f6f719616f63 100644
> --- a/drivers/clk/qcom/dispcc-sm8250.c
> +++ b/drivers/clk/qcom/dispcc-sm8250.c
> @@ -1289,6 +1289,10 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
>   		disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
>   		disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
>   		disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
> +
> +		disp_cc_sm8250_clocks[DISP_CC_MDSS_DP_LINK1_DIV_CLK_SRC] = NULL;
> +		disp_cc_sm8250_clocks[DISP_CC_MDSS_DP_LINK_DIV_CLK_SRC] = NULL;
> +		disp_cc_sm8250_clocks[DISP_CC_MDSS_EDP_LINK_DIV_CLK_SRC] = NULL;

We also have to fix link_intf clocks:

disp_cc_mdss_dp_link_intf_clk.clkr.hw.init->parent_hws[0] = 
&disp_cc_mdss_dp_link_clk_src.clkr.hw;
disp_cc_mdss_dp_link1_intf_clk.clkr.hw.init->parent_hws[0] = 
&disp_cc_mdss_dp_link1_clk_src.clkr.hw;
disp_cc_mdss_edp_link_intf_clk.clkr.hw.init->parent_hws[0] = 
&disp_cc_mdss_edp_link_clk_src.clkr.hw;



>   	} else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
>   		static struct clk_rcg2 * const rcgs[] = {
>   			&disp_cc_mdss_byte0_clk_src,

-- 
With best wishes
Dmitry

Re: [PATCH v1 4/5] clk: qcom: dispcc-sm8250: Add missing EDP clocks for sm8350

[Dmitry Baryshkov]

On 27/10/2022 15:34, Robert Foss wrote:
> SM8350 supports embedded displayport, but the clocks for this
> were previously not enabled.

I'd say 'not accounted for' instead. Bjorn has added eDP clocks, but 
they were following the 8150 (no div_clk_src) and the offsets were not 
updated.

> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>   drivers/clk/qcom/dispcc-sm8250.c | 22 +++++++++++++++++++++-
>   1 file changed, 21 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
> index a7606580cf22..d2aaa44ed3d4 100644
> --- a/drivers/clk/qcom/dispcc-sm8250.c
> +++ b/drivers/clk/qcom/dispcc-sm8250.c
> @@ -462,6 +462,20 @@ static struct clk_branch disp_cc_mdss_edp_link_clk = {
>   	},
>   };
>   
> +static struct clk_regmap_div disp_cc_mdss_edp_link_div_clk_src = {
> +	.reg = 0x2288,
> +	.shift = 0,
> +	.width = 2,
> +	.clkr.hw.init = &(struct clk_init_data) {
> +		.name = "disp_cc_mdss_edp_link_div_clk_src",
> +		.parent_hws = (const struct clk_hw*[]){
> +			&disp_cc_mdss_edp_link_clk_src.clkr.hw,
> +		},
> +		.num_parents = 1,
> +		.ops = &clk_regmap_div_ro_ops,
> +	},
> +};
> +
>   static struct clk_branch disp_cc_mdss_edp_link_intf_clk = {
>   	.halt_reg = 0x2074,
>   	.halt_check = BRANCH_HALT,
> @@ -471,7 +485,7 @@ static struct clk_branch disp_cc_mdss_edp_link_intf_clk = {
>   		.hw.init = &(struct clk_init_data){
>   			.name = "disp_cc_mdss_edp_link_intf_clk",
>   			.parent_hws = (const struct clk_hw*[]){
> -				&disp_cc_mdss_edp_link_clk_src.clkr.hw,
> +				&disp_cc_mdss_edp_link_div_clk_src.clkr.hw,
>   			},
>   			.num_parents = 1,
>   			.flags = CLK_GET_RATE_NOCACHE,
> @@ -1175,6 +1189,7 @@ static struct clk_regmap *disp_cc_sm8250_clocks[] = {
>   	[DISP_CC_MDSS_EDP_GTC_CLK_SRC] = &disp_cc_mdss_edp_gtc_clk_src.clkr,
>   	[DISP_CC_MDSS_EDP_LINK_CLK] = &disp_cc_mdss_edp_link_clk.clkr,
>   	[DISP_CC_MDSS_EDP_LINK_CLK_SRC] = &disp_cc_mdss_edp_link_clk_src.clkr,
> +	[DISP_CC_MDSS_EDP_LINK_DIV_CLK_SRC] = &disp_cc_mdss_edp_link_div_clk_src.clkr,
>   	[DISP_CC_MDSS_EDP_LINK_INTF_CLK] = &disp_cc_mdss_edp_link_intf_clk.clkr,
>   	[DISP_CC_MDSS_EDP_PIXEL_CLK] = &disp_cc_mdss_edp_pixel_clk.clkr,
>   	[DISP_CC_MDSS_EDP_PIXEL_CLK_SRC] = &disp_cc_mdss_edp_pixel_clk_src.clkr,
> @@ -1285,7 +1300,11 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
>   			&disp_cc_mdss_dp_pixel1_clk_src,
>   			&disp_cc_mdss_dp_pixel2_clk_src,
>   			&disp_cc_mdss_dp_pixel_clk_src,
> +			&disp_cc_mdss_edp_aux_clk_src,
> +			&disp_cc_mdss_edp_link_clk_src,
> +			&disp_cc_mdss_edp_pixel_clk_src,
>   			&disp_cc_mdss_esc0_clk_src,
> +			&disp_cc_mdss_esc1_clk_src,
>   			&disp_cc_mdss_mdp_clk_src,
>   			&disp_cc_mdss_pclk0_clk_src,
>   			&disp_cc_mdss_pclk1_clk_src,
> @@ -1297,6 +1316,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
>   			&disp_cc_mdss_byte1_div_clk_src,
>   			&disp_cc_mdss_dp_link1_div_clk_src,
>   			&disp_cc_mdss_dp_link_div_clk_src,
> +			&disp_cc_mdss_edp_link_div_clk_src,
>   		};
>   		unsigned int i;
>   		static bool offset_applied;

-- 
With best wishes
Dmitry

Re: [PATCH v1 1/5] clk: qcom: dispcc-sm8250: Disable EDP_GTC for sm8350

[Dmitry Baryshkov]

On 27/10/2022 15:34, Robert Foss wrote:
> SM8350 does not have the EDP_GTC clock, so let's disable it
> for this SoC.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>   drivers/clk/qcom/dispcc-sm8250.c | 3 +++
>   1 file changed, 3 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH v1 2/5] clk: qcom: dispcc-sm8250: Add RETAIN_FF_ENABLE flag for mdss_gdsc

[Dmitry Baryshkov]

On 27/10/2022 15:34, Robert Foss wrote:
> All SoC supported by this driver supports the RETAIN_FF_ENABLE flag,
> so it should be enabled here.
> 
> This feature enables registers to maintain their state after
> dis/re-enabling the GDSC.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>   drivers/clk/qcom/dispcc-sm8250.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH v1 2/5] clk: qcom: dispcc-sm8250: Add RETAIN_FF_ENABLE flag for mdss_gdsc

[Konrad Dybcio]

On 27/10/2022 14:34, Robert Foss wrote:
> All SoC supported by this driver supports the RETAIN_FF_ENABLE flag,
> so it should be enabled here.
>
> This feature enables registers to maintain their state after
> dis/re-enabling the GDSC.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>


Konrad

>   drivers/clk/qcom/dispcc-sm8250.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
> index 180ac2726f7e..a7606580cf22 100644
> --- a/drivers/clk/qcom/dispcc-sm8250.c
> +++ b/drivers/clk/qcom/dispcc-sm8250.c
> @@ -1137,7 +1137,7 @@ static struct gdsc mdss_gdsc = {
>   		.name = "mdss_gdsc",
>   	},
>   	.pwrsts = PWRSTS_OFF_ON,
> -	.flags = HW_CTRL,
> +	.flags = HW_CTRL | RETAIN_FF_ENABLE,
>   };
>   
>   static struct clk_regmap *disp_cc_sm8250_clocks[] = {

Re: [PATCH v1 3/5] dt-bindings: clock: dispcc-sm8250: Add EDP_LINK_DIV_CLK_SRC index

[Krzysztof Kozlowski]

On 27/10/2022 08:34, Robert Foss wrote:
> Add this previously missing index, since it is supported by the SoCs
> targeted by the dispcc-sm8250 driver.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v1 4/5] clk: qcom: dispcc-sm8250: Add missing EDP clocks for sm8350

[Robert Foss]

On Thu, 27 Oct 2022 at 14:42, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On 27/10/2022 15:34, Robert Foss wrote:
> > SM8350 supports embedded displayport, but the clocks for this
> > were previously not enabled.
>
> I'd say 'not accounted for' instead. Bjorn has added eDP clocks, but
> they were following the 8150 (no div_clk_src) and the offsets were not
> updated.

Ack.

>
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> >   drivers/clk/qcom/dispcc-sm8250.c | 22 +++++++++++++++++++++-
> >   1 file changed, 21 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
> > index a7606580cf22..d2aaa44ed3d4 100644
> > --- a/drivers/clk/qcom/dispcc-sm8250.c
> > +++ b/drivers/clk/qcom/dispcc-sm8250.c
> > @@ -462,6 +462,20 @@ static struct clk_branch disp_cc_mdss_edp_link_clk = {
> >       },
> >   };
> >
> > +static struct clk_regmap_div disp_cc_mdss_edp_link_div_clk_src = {
> > +     .reg = 0x2288,
> > +     .shift = 0,
> > +     .width = 2,
> > +     .clkr.hw.init = &(struct clk_init_data) {
> > +             .name = "disp_cc_mdss_edp_link_div_clk_src",
> > +             .parent_hws = (const struct clk_hw*[]){
> > +                     &disp_cc_mdss_edp_link_clk_src.clkr.hw,
> > +             },
> > +             .num_parents = 1,
> > +             .ops = &clk_regmap_div_ro_ops,
> > +     },
> > +};
> > +
> >   static struct clk_branch disp_cc_mdss_edp_link_intf_clk = {
> >       .halt_reg = 0x2074,
> >       .halt_check = BRANCH_HALT,
> > @@ -471,7 +485,7 @@ static struct clk_branch disp_cc_mdss_edp_link_intf_clk = {
> >               .hw.init = &(struct clk_init_data){
> >                       .name = "disp_cc_mdss_edp_link_intf_clk",
> >                       .parent_hws = (const struct clk_hw*[]){
> > -                             &disp_cc_mdss_edp_link_clk_src.clkr.hw,
> > +                             &disp_cc_mdss_edp_link_div_clk_src.clkr.hw,
> >                       },
> >                       .num_parents = 1,
> >                       .flags = CLK_GET_RATE_NOCACHE,
> > @@ -1175,6 +1189,7 @@ static struct clk_regmap *disp_cc_sm8250_clocks[] = {
> >       [DISP_CC_MDSS_EDP_GTC_CLK_SRC] = &disp_cc_mdss_edp_gtc_clk_src.clkr,
> >       [DISP_CC_MDSS_EDP_LINK_CLK] = &disp_cc_mdss_edp_link_clk.clkr,
> >       [DISP_CC_MDSS_EDP_LINK_CLK_SRC] = &disp_cc_mdss_edp_link_clk_src.clkr,
> > +     [DISP_CC_MDSS_EDP_LINK_DIV_CLK_SRC] = &disp_cc_mdss_edp_link_div_clk_src.clkr,
> >       [DISP_CC_MDSS_EDP_LINK_INTF_CLK] = &disp_cc_mdss_edp_link_intf_clk.clkr,
> >       [DISP_CC_MDSS_EDP_PIXEL_CLK] = &disp_cc_mdss_edp_pixel_clk.clkr,
> >       [DISP_CC_MDSS_EDP_PIXEL_CLK_SRC] = &disp_cc_mdss_edp_pixel_clk_src.clkr,
> > @@ -1285,7 +1300,11 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
> >                       &disp_cc_mdss_dp_pixel1_clk_src,
> >                       &disp_cc_mdss_dp_pixel2_clk_src,
> >                       &disp_cc_mdss_dp_pixel_clk_src,
> > +                     &disp_cc_mdss_edp_aux_clk_src,
> > +                     &disp_cc_mdss_edp_link_clk_src,
> > +                     &disp_cc_mdss_edp_pixel_clk_src,
> >                       &disp_cc_mdss_esc0_clk_src,
> > +                     &disp_cc_mdss_esc1_clk_src,
> >                       &disp_cc_mdss_mdp_clk_src,
> >                       &disp_cc_mdss_pclk0_clk_src,
> >                       &disp_cc_mdss_pclk1_clk_src,
> > @@ -1297,6 +1316,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
> >                       &disp_cc_mdss_byte1_div_clk_src,
> >                       &disp_cc_mdss_dp_link1_div_clk_src,
> >                       &disp_cc_mdss_dp_link_div_clk_src,
> > +                     &disp_cc_mdss_edp_link_div_clk_src,
> >               };
> >               unsigned int i;
> >               static bool offset_applied;
>
> --
> With best wishes
> Dmitry
>