From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Taniya Das <quic_tdas@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org,
Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v3 07/11] clk: qcom: mmcc-msm8974: move clock parent tables down
Date: Sun, 30 Oct 2022 18:55:16 +0300 [thread overview]
Message-ID: <20221030155520.91629-8-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20221030155520.91629-1-dmitry.baryshkov@linaro.org>
Move clock parent tables down, after the PLL declarataions, so that we
can use pll hw clock fields in the next commit.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/clk/qcom/mmcc-msm8974.c | 170 ++++++++++++++++----------------
1 file changed, 85 insertions(+), 85 deletions(-)
diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c
index 9008df2305df..57f1a351c8f6 100644
--- a/drivers/clk/qcom/mmcc-msm8974.c
+++ b/drivers/clk/qcom/mmcc-msm8974.c
@@ -42,6 +42,91 @@ enum {
P_DSI1PLL_BYTE,
};
+static struct clk_pll mmpll0 = {
+ .l_reg = 0x0004,
+ .m_reg = 0x0008,
+ .n_reg = 0x000c,
+ .config_reg = 0x0014,
+ .mode_reg = 0x0000,
+ .status_reg = 0x001c,
+ .status_bit = 17,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "mmpll0",
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_pll_ops,
+ },
+};
+
+static struct clk_regmap mmpll0_vote = {
+ .enable_reg = 0x0100,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "mmpll0_vote",
+ .parent_names = (const char *[]){ "mmpll0" },
+ .num_parents = 1,
+ .ops = &clk_pll_vote_ops,
+ },
+};
+
+static struct clk_pll mmpll1 = {
+ .l_reg = 0x0044,
+ .m_reg = 0x0048,
+ .n_reg = 0x004c,
+ .config_reg = 0x0050,
+ .mode_reg = 0x0040,
+ .status_reg = 0x005c,
+ .status_bit = 17,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "mmpll1",
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_pll_ops,
+ },
+};
+
+static struct clk_regmap mmpll1_vote = {
+ .enable_reg = 0x0100,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "mmpll1_vote",
+ .parent_names = (const char *[]){ "mmpll1" },
+ .num_parents = 1,
+ .ops = &clk_pll_vote_ops,
+ },
+};
+
+static struct clk_pll mmpll2 = {
+ .l_reg = 0x4104,
+ .m_reg = 0x4108,
+ .n_reg = 0x410c,
+ .config_reg = 0x4110,
+ .mode_reg = 0x4100,
+ .status_reg = 0x411c,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "mmpll2",
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_pll_ops,
+ },
+};
+
+static struct clk_pll mmpll3 = {
+ .l_reg = 0x0084,
+ .m_reg = 0x0088,
+ .n_reg = 0x008c,
+ .config_reg = 0x0090,
+ .mode_reg = 0x0080,
+ .status_reg = 0x009c,
+ .status_bit = 17,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "mmpll3",
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_pll_ops,
+ },
+};
+
static const struct parent_map mmcc_xo_mmpll0_mmpll1_gpll0_map[] = {
{ P_XO, 0 },
{ P_MMPLL0, 1 },
@@ -160,91 +245,6 @@ static const char * const mmcc_xo_dsibyte_hdmi_edp_gpll0[] = {
"dsi1pllbyte",
};
-static struct clk_pll mmpll0 = {
- .l_reg = 0x0004,
- .m_reg = 0x0008,
- .n_reg = 0x000c,
- .config_reg = 0x0014,
- .mode_reg = 0x0000,
- .status_reg = 0x001c,
- .status_bit = 17,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "mmpll0",
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
- .ops = &clk_pll_ops,
- },
-};
-
-static struct clk_regmap mmpll0_vote = {
- .enable_reg = 0x0100,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "mmpll0_vote",
- .parent_names = (const char *[]){ "mmpll0" },
- .num_parents = 1,
- .ops = &clk_pll_vote_ops,
- },
-};
-
-static struct clk_pll mmpll1 = {
- .l_reg = 0x0044,
- .m_reg = 0x0048,
- .n_reg = 0x004c,
- .config_reg = 0x0050,
- .mode_reg = 0x0040,
- .status_reg = 0x005c,
- .status_bit = 17,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "mmpll1",
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
- .ops = &clk_pll_ops,
- },
-};
-
-static struct clk_regmap mmpll1_vote = {
- .enable_reg = 0x0100,
- .enable_mask = BIT(1),
- .hw.init = &(struct clk_init_data){
- .name = "mmpll1_vote",
- .parent_names = (const char *[]){ "mmpll1" },
- .num_parents = 1,
- .ops = &clk_pll_vote_ops,
- },
-};
-
-static struct clk_pll mmpll2 = {
- .l_reg = 0x4104,
- .m_reg = 0x4108,
- .n_reg = 0x410c,
- .config_reg = 0x4110,
- .mode_reg = 0x4100,
- .status_reg = 0x411c,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "mmpll2",
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
- .ops = &clk_pll_ops,
- },
-};
-
-static struct clk_pll mmpll3 = {
- .l_reg = 0x0084,
- .m_reg = 0x0088,
- .n_reg = 0x008c,
- .config_reg = 0x0090,
- .mode_reg = 0x0080,
- .status_reg = 0x009c,
- .status_bit = 17,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "mmpll3",
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
- .ops = &clk_pll_ops,
- },
-};
-
static struct clk_rcg2 mmss_ahb_clk_src = {
.cmd_rcgr = 0x5000,
.hid_width = 5,
--
2.35.1
next prev parent reply other threads:[~2022-10-30 15:55 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-30 15:55 [PATCH v3 00/11] clk: qcom: update MSM8974 clock controller drivers Dmitry Baryshkov
2022-10-30 15:55 ` [PATCH v3 01/11] dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file Dmitry Baryshkov
2022-11-02 13:47 ` Rob Herring
2022-11-02 20:40 ` Krzysztof Kozlowski
2022-10-30 15:55 ` [PATCH v3 02/11] dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974 Dmitry Baryshkov
2022-10-30 15:55 ` [PATCH v3 03/11] clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents Dmitry Baryshkov
2022-10-31 21:10 ` Konrad Dybcio
2022-10-30 15:55 ` [PATCH v3 04/11] clk: qcom: gcc-msm8974: move clock parent tables down Dmitry Baryshkov
2022-10-31 21:10 ` Konrad Dybcio
2022-10-30 15:55 ` [PATCH v3 05/11] clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names Dmitry Baryshkov
2022-10-30 15:55 ` [PATCH v3 06/11] clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents Dmitry Baryshkov
2022-10-31 21:11 ` Konrad Dybcio
2022-10-30 15:55 ` Dmitry Baryshkov [this message]
2022-10-31 21:11 ` [PATCH v3 07/11] clk: qcom: mmcc-msm8974: move clock parent tables down Konrad Dybcio
2022-10-30 15:55 ` [PATCH v3 08/11] clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names Dmitry Baryshkov
2022-10-31 21:09 ` Konrad Dybcio
2022-11-07 21:55 ` Bjorn Andersson
2022-11-07 22:15 ` Konrad Dybcio
2022-11-07 22:17 ` Marijn Suijten
2022-10-30 15:55 ` [PATCH v3 09/11] ARM: dts: qcom: msm8974: add second DSI host and PHY Dmitry Baryshkov
2022-10-30 15:55 ` [PATCH v3 10/11] ARM: dts: qcom: msm8974: add clocks and clock-names to gcc device Dmitry Baryshkov
2022-10-31 21:05 ` Konrad Dybcio
2022-10-30 15:55 ` [PATCH v3 11/11] ARM: dts: qcom: msm8974: add clocks and clock-names to mmcc device Dmitry Baryshkov
2022-10-31 21:04 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221030155520.91629-8-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=quic_tdas@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).