devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: lee <lee@arducam.com>
To: linux-media@vger.kernel.org
Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	shawnguo@kernel.org, s.hauer@pengutronix.de,
	devicetree@vger.kernel.org
Subject: [PATCH v2 1/2] dt-bindings: media: i2c: Add IMX519 CMOS sensor binding
Date: Thu, 3 Nov 2022 11:04:24 +0800	[thread overview]
Message-ID: <20221103110424.00007a48@arducam.com> (raw)

Add YAML device tree binding for IMX519 CMOS image sensor, and
the relevant MAINTAINERS entries.

Signed-off-by: Lee Jackson <lee@arducam.com>
---
 .../bindings/media/i2c/sony,imx519.yaml       | 107 ++++++++++++++++++
 MAINTAINERS                                   |   9 ++
 2 files changed, 116 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx519.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx519.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx519.yaml
new file mode 100644
index 000000000000..9b6cda96f613
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx519.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx519.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.5-Inch 16Mpixel CMOS Digital Image Sensor
+
+maintainers:
+  - Lee Jackson <lee@arducam.com>
+
+description: |-
+  The Sony IMX519 is a 1/2.5-inch CMOS active pixel digital image sensor
+  with an active array size of 4656H x 3496V. It is programmable through
+  I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet.
+  Image data is sent through MIPI CSI-2, which is configured as either 2 or
+  4 data lanes.
+
+properties:
+  compatible:
+    const: sony,imx519
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  VDIG-supply:
+    description:
+      Digital I/O voltage supply, 1.05 volts
+
+  VANA-supply:
+    description:
+      Analog voltage supply, 2.8 volts
+
+  VDDL-supply:
+    description:
+      Digital core voltage supply, 1.8 volts
+
+  reset-gpios:
+    description: |-
+      Reference to the GPIO connected to the xclr pin, if any.
+      Must be released (set high) after all supplies and INCK are applied.
+
+port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            description: |-
+              The driver only supports two-lane operation.
+            items:
+              - const: 1
+              - const: 2
+
+          clock-noncontinuous: true
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - VANA-supply
+  - VDIG-supply
+  - VDDL-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx519: sensor@1a {
+            compatible = "sony,imx519";
+            reg = <0x1a>;
+            clocks = <&imx519_clk>;
+            VANA-supply = <&imx519_vana>;   /* 2.8v */
+            VDIG-supply = <&imx519_vdig>;   /* 1.05v */
+            VDDL-supply = <&imx519_vddl>;   /* 1.8v */
+
+            port {
+                imx519_0: endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2>;
+                    clock-noncontinuous;
+                    link-frequencies = /bits/ 64 <493500000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index e04d944005ba..5a617ab8c9b2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19236,6 +19236,15 @@ T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
 F:	drivers/media/i2c/imx412.c
 
+SONY IMX519 SENSOR DRIVER
+M:	Arducam Kernel Maintenance <info@arducam.com>
+M:	Lee Jackson <lee@arducam.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/sony,imx519.yaml
+F:	drivers/media/i2c/imx519.c
+
 SONY MEMORYSTICK SUBSYSTEM
 M:	Maxim Levitsky <maximlevitsky@gmail.com>
 M:	Alex Dubov <oakad@yahoo.com>
-- 
2.25.1

             reply	other threads:[~2022-11-03  3:04 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-03  3:04 lee [this message]
2022-11-03 12:35 ` [PATCH v2 1/2] dt-bindings: media: i2c: Add IMX519 CMOS sensor binding Rob Herring
2022-11-03 13:05 ` Krzysztof Kozlowski
2022-11-07  2:42   ` lee
2022-11-07  8:24     ` Krzysztof Kozlowski
2022-11-07 10:24       ` lee
  -- strict thread matches above, loose matches on Subject: below --
2022-11-04  7:26 lee
2022-11-04 12:36 ` Rob Herring
2022-11-04 13:17 ` Krzysztof Kozlowski
2022-11-16  1:37   ` lee
2022-11-04 13:18 ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221103110424.00007a48@arducam.com \
    --to=lee@arducam.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-media@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).