[PATCH v7 0/2] Enable RPi header on j721e sk

[Rahul T R <r-ravikumar@ti.com>]

The following series of patches enables RPi header
on j721e sk. It is a 40 pin io expasion header which
brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1

v7:
   - Rebased to next-20221103
   - Move setting status diable to main dtsi

v6:
   - Rebased to 6.1-rc1

v5:
   - Enable only gpio's and i2c on the RPi Header
     as per the discussion in the v4

v4:
   - Correct the node name in dt binding example

v3:
   - Change node name from clock to clock-controller
   - Add correct description for clock-controller node

v2:
   - Add full path for clock property $ref
   - Remove the discription for clock pattern property,
     since $ref is added
   - Remove the label in the example
   - Fix the indentation in the example

Rahul T R (1):
  arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header

Vijay Pothukuchi (1):
  arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMs

 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 68 ++++++++++++++++++++++-
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts    | 59 ++++++++++++++++++++
 2 files changed, 126 insertions(+), 1 deletion(-)

-- 
2.38.0