From: Rahul T R <r-ravikumar@ti.com>
To: <nm@ti.com>
Cc: <vigneshr@ti.com>, <kristo@kernel.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<r-ravikumar@ti.com>, <jkridner@gmail.com>
Subject: [PATCH v7 1/2] arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMs
Date: Thu, 3 Nov 2022 23:17:42 +0530 [thread overview]
Message-ID: <20221103174743.16827-2-r-ravikumar@ti.com> (raw)
In-Reply-To: <20221103174743.16827-1-r-ravikumar@ti.com>
From: Vijay Pothukuchi <vijayp@ti.com>
Add dts nodes for 6 EHRPWM instances on SoC
Signed-off-by: Vijay Pothukuchi <vijayp@ti.com>
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 68 ++++++++++++++++++++++-
1 file changed, 67 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 5c4a0e28cde5..bc3146e24816 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -66,7 +66,73 @@ usb_serdes_mux: mux-controller@4000 {
#mux-control-cells = <1>;
mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */
<0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */
- };
+ };
+
+ ehrpwm_tbclk: clock-controller@4140 {
+ compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+ reg = <0x4140 0x18>;
+ #clock-cells = <1>;
+ };
+ };
+
+ main_ehrpwm0: pwm@3000000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x00 0x3000000 0x00 0x100>;
+ power-domains = <&k3_pds 83 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 0>, <&k3_clks 83 0>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ main_ehrpwm1: pwm@3010000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x00 0x3010000 0x00 0x100>;
+ power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 1>, <&k3_clks 84 0>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ main_ehrpwm2: pwm@3020000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x00 0x3020000 0x00 0x100>;
+ power-domains = <&k3_pds 85 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 2>, <&k3_clks 85 0>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ main_ehrpwm3: pwm@3030000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x00 0x3030000 0x00 0x100>;
+ power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 3>, <&k3_clks 86 0>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ main_ehrpwm4: pwm@3040000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x00 0x3040000 0x00 0x100>;
+ power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 4>, <&k3_clks 87 0>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ main_ehrpwm5: pwm@3050000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x00 0x3050000 0x00 0x100>;
+ power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 5>, <&k3_clks 88 0>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
};
gic500: interrupt-controller@1800000 {
--
2.38.0
next prev parent reply other threads:[~2022-11-03 17:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-03 17:47 [PATCH v7 0/2] Enable RPi header on j721e sk Rahul T R
2022-11-03 17:47 ` Rahul T R [this message]
2022-11-03 21:53 ` [PATCH v7 1/2] arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMs Nishanth Menon
2022-11-04 5:08 ` Rahul T R
2022-11-03 17:47 ` [PATCH v7 2/2] arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header Rahul T R
2022-11-03 21:54 ` Nishanth Menon
2022-11-04 5:15 ` Rahul T R
2022-11-04 23:56 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221103174743.16827-2-r-ravikumar@ti.com \
--to=r-ravikumar@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jkridner@gmail.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).