Re: [PATCH v2] dt-bindings: net: nxp,sja1105: document spi-cpol/cpha

[Vladimir Oltean <olteanv@gmail.com>]

Hi Krzysztof,

On Wed, Nov 02, 2022 at 02:52:32PM -0400, Krzysztof Kozlowski wrote:
> Some boards use SJA1105 Ethernet Switch with SPI CPOL and CPHA, so
> document this to fix dtbs_check warnings:
> 
>   arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb: ethernet-switch@0: Unevaluated properties are not allowed ('spi-cpol' was unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> Changes since v1:
> 1. Add also cpha
> ---
>  Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
> index 1e26d876d146..3debbf0f3789 100644
> --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
> @@ -36,6 +36,9 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  spi-cpha: true
> +  spi-cpol: true
> +
>    # Optional container node for the 2 internal MDIO buses of the SJA1110
>    # (one for the internal 100base-T1 PHYs and the other for the single
>    # 100base-TX PHY). The "reg" property does not have physical significance.
> -- 
> 2.34.1
> 

Don't these belong to spi-peripheral-props.yaml?