From: Johan Hovold <johan+linaro@kernel.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan+linaro@kernel.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v5 09/16] phy: qcom-qmp-pcie: add register init helper
Date: Sat, 5 Nov 2022 15:59:32 +0100 [thread overview]
Message-ID: <20221105145939.20318-10-johan+linaro@kernel.org> (raw)
In-Reply-To: <20221105145939.20318-1-johan+linaro@kernel.org>
Generalise the serdes initialisation helper so that it can be used to
initialise all the PHY registers (e.g. serdes, tx, rx, pcs).
Note that this defers the ungating of the PIPE clock somewhat, which is
fine as it isn't needed until starting the PHY.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 37 +++++-------------------
1 file changed, 8 insertions(+), 29 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index a977f2bbd831..09999d5b5268 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1820,27 +1820,22 @@ static void qmp_pcie_configure(void __iomem *base,
qmp_pcie_configure_lane(base, tbl, num, 0xff);
}
-static void qmp_pcie_serdes_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tbls *tbls)
-{
- void __iomem *serdes = qmp->serdes;
-
- if (!tbls)
- return;
-
- qmp_pcie_configure(serdes, tbls->serdes, tbls->serdes_num);
-}
-
-static void qmp_pcie_lanes_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tbls *tbls)
+static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tbls *tbls)
{
const struct qmp_phy_cfg *cfg = qmp->cfg;
+ void __iomem *serdes = qmp->serdes;
void __iomem *tx = qmp->tx;
void __iomem *rx = qmp->rx;
void __iomem *tx2 = qmp->tx2;
void __iomem *rx2 = qmp->rx2;
+ void __iomem *pcs = qmp->pcs;
+ void __iomem *pcs_misc = qmp->pcs_misc;
if (!tbls)
return;
+ qmp_pcie_configure(serdes, tbls->serdes, tbls->serdes_num);
+
qmp_pcie_configure_lane(tx, tbls->tx, tbls->tx_num, 1);
qmp_pcie_configure_lane(rx, tbls->rx, tbls->rx_num, 1);
@@ -1848,15 +1843,6 @@ static void qmp_pcie_lanes_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_t
qmp_pcie_configure_lane(tx2, tbls->tx, tbls->tx_num, 2);
qmp_pcie_configure_lane(rx2, tbls->rx, tbls->rx_num, 2);
}
-}
-
-static void qmp_pcie_pcs_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tbls *tbls)
-{
- void __iomem *pcs = qmp->pcs;
- void __iomem *pcs_misc = qmp->pcs_misc;
-
- if (!tbls)
- return;
qmp_pcie_configure(pcs, tbls->pcs, tbls->pcs_num);
qmp_pcie_configure(pcs_misc, tbls->pcs_misc, tbls->pcs_misc_num);
@@ -1932,8 +1918,8 @@ static int qmp_pcie_power_on(struct phy *phy)
else
mode_tbls = cfg->tbls_ep;
- qmp_pcie_serdes_init(qmp, &cfg->tbls);
- qmp_pcie_serdes_init(qmp, mode_tbls);
+ qmp_pcie_init_registers(qmp, &cfg->tbls);
+ qmp_pcie_init_registers(qmp, mode_tbls);
ret = clk_prepare_enable(qmp->pipe_clk);
if (ret) {
@@ -1941,13 +1927,6 @@ static int qmp_pcie_power_on(struct phy *phy)
return ret;
}
- /* Tx, Rx, and PCS configurations */
- qmp_pcie_lanes_init(qmp, &cfg->tbls);
- qmp_pcie_lanes_init(qmp, mode_tbls);
-
- qmp_pcie_pcs_init(qmp, &cfg->tbls);
- qmp_pcie_pcs_init(qmp, mode_tbls);
-
/* Pull PHY out of reset state */
qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
--
2.37.4
next prev parent reply other threads:[~2022-11-05 15:02 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-05 14:59 [PATCH v5 00/16] phy: qcom-qmp-pcie: add support for sc8280xp Johan Hovold
2022-11-05 14:59 ` [PATCH v5 01/16] phy: qcom-qmp-pcie: sort device-id table Johan Hovold
2022-11-05 14:59 ` [PATCH v5 02/16] phy: qcom-qmp-pcie: move " Johan Hovold
2022-11-05 14:59 ` [PATCH v5 03/16] phy: qcom-qmp-pcie: merge driver data Johan Hovold
2022-11-05 14:59 ` [PATCH v5 04/16] phy: qcom-qmp-pcie: clean up device-tree parsing Johan Hovold
2022-11-05 14:59 ` [PATCH v5 05/16] phy: qcom-qmp-pcie: clean up probe initialisation Johan Hovold
2022-11-05 14:59 ` [PATCH v5 06/16] phy: qcom-qmp-pcie: rename PHY ops structure Johan Hovold
2022-11-05 14:59 ` [PATCH v5 07/16] phy: qcom-qmp-pcie: clean up PHY lane init Johan Hovold
2022-11-05 14:59 ` [PATCH v5 08/16] phy: qcom-qmp-pcie: use shorter tables identifiers Johan Hovold
2022-11-05 21:39 ` Dmitry Baryshkov
2022-11-05 14:59 ` Johan Hovold [this message]
2022-11-05 14:59 ` [PATCH v5 10/16] dt-bindings: phy: qcom,qmp-pcie: rename current bindings Johan Hovold
2022-11-05 14:59 ` [PATCH v5 11/16] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings Johan Hovold
2022-11-05 14:59 ` [PATCH v5 12/16] phy: qcom-qmp-pcie: restructure PHY creation Johan Hovold
2022-11-05 14:59 ` [PATCH v5 13/16] phy: qcom-qmp-pcie: fix initialisation reset Johan Hovold
2022-11-05 14:59 ` [PATCH v5 14/16] phy: qcom-qmp-pcie: add support for pipediv2 clock Johan Hovold
2022-11-05 14:59 ` [PATCH v5 15/16] phy: qcom-qmp-pcie: add support for sc8280xp Johan Hovold
2022-11-05 14:59 ` [PATCH v5 16/16] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs Johan Hovold
2022-11-10 7:05 ` [PATCH v5 00/16] phy: qcom-qmp-pcie: add support for sc8280xp Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221105145939.20318-10-johan+linaro@kernel.org \
--to=johan+linaro@kernel.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).