From: Johan Hovold <johan+linaro@kernel.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan+linaro@kernel.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v5 14/16] phy: qcom-qmp-pcie: add support for pipediv2 clock
Date: Sat, 5 Nov 2022 15:59:37 +0100 [thread overview]
Message-ID: <20221105145939.20318-15-johan+linaro@kernel.org> (raw)
In-Reply-To: <20221105145939.20318-1-johan+linaro@kernel.org>
Some QMP PHYs have a second fixed-divider pipe clock that needs to be
enabled along with the pipe clock.
Add support for an optional "pipediv2" clock.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 25 ++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 06844552922e..d671b05c73dd 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1378,8 +1378,10 @@ struct qmp_pcie {
void __iomem *tx2;
void __iomem *rx2;
- struct clk *pipe_clk;
struct clk_bulk_data *clks;
+ struct clk_bulk_data pipe_clks[2];
+ int num_pipe_clks;
+
struct reset_control_bulk_data *resets;
struct regulator_bulk_data *vregs;
@@ -1923,11 +1925,9 @@ static int qmp_pcie_power_on(struct phy *phy)
qmp_pcie_init_registers(qmp, &cfg->tbls);
qmp_pcie_init_registers(qmp, mode_tbls);
- ret = clk_prepare_enable(qmp->pipe_clk);
- if (ret) {
- dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
+ ret = clk_bulk_prepare_enable(qmp->num_pipe_clks, qmp->pipe_clks);
+ if (ret)
return ret;
- }
/* Pull PHY out of reset state */
qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
@@ -1950,7 +1950,7 @@ static int qmp_pcie_power_on(struct phy *phy)
return 0;
err_disable_pipe_clk:
- clk_disable_unprepare(qmp->pipe_clk);
+ clk_bulk_disable_unprepare(qmp->num_pipe_clks, qmp->pipe_clks);
return ret;
}
@@ -1960,7 +1960,7 @@ static int qmp_pcie_power_off(struct phy *phy)
struct qmp_pcie *qmp = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qmp->cfg;
- clk_disable_unprepare(qmp->pipe_clk);
+ clk_bulk_disable_unprepare(qmp->num_pipe_clks, qmp->pipe_clks);
/* PHY reset */
qphy_setbits(qmp->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
@@ -2154,6 +2154,7 @@ static int qmp_pcie_parse_dt_legacy(struct qmp_pcie *qmp, struct device_node *np
struct platform_device *pdev = to_platform_device(qmp->dev);
const struct qmp_phy_cfg *cfg = qmp->cfg;
struct device *dev = qmp->dev;
+ struct clk *clk;
qmp->serdes = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(qmp->serdes))
@@ -2206,12 +2207,16 @@ static int qmp_pcie_parse_dt_legacy(struct qmp_pcie *qmp, struct device_node *np
}
}
- qmp->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
- if (IS_ERR(qmp->pipe_clk)) {
- return dev_err_probe(dev, PTR_ERR(qmp->pipe_clk),
+ clk = devm_get_clk_from_child(dev, np, NULL);
+ if (IS_ERR(clk)) {
+ return dev_err_probe(dev, PTR_ERR(clk),
"failed to get pipe clock\n");
}
+ qmp->num_pipe_clks = 1;
+ qmp->pipe_clks[0].id = "pipe";
+ qmp->pipe_clks[0].clk = clk;
+
return 0;
}
--
2.37.4
next prev parent reply other threads:[~2022-11-05 15:03 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-05 14:59 [PATCH v5 00/16] phy: qcom-qmp-pcie: add support for sc8280xp Johan Hovold
2022-11-05 14:59 ` [PATCH v5 01/16] phy: qcom-qmp-pcie: sort device-id table Johan Hovold
2022-11-05 14:59 ` [PATCH v5 02/16] phy: qcom-qmp-pcie: move " Johan Hovold
2022-11-05 14:59 ` [PATCH v5 03/16] phy: qcom-qmp-pcie: merge driver data Johan Hovold
2022-11-05 14:59 ` [PATCH v5 04/16] phy: qcom-qmp-pcie: clean up device-tree parsing Johan Hovold
2022-11-05 14:59 ` [PATCH v5 05/16] phy: qcom-qmp-pcie: clean up probe initialisation Johan Hovold
2022-11-05 14:59 ` [PATCH v5 06/16] phy: qcom-qmp-pcie: rename PHY ops structure Johan Hovold
2022-11-05 14:59 ` [PATCH v5 07/16] phy: qcom-qmp-pcie: clean up PHY lane init Johan Hovold
2022-11-05 14:59 ` [PATCH v5 08/16] phy: qcom-qmp-pcie: use shorter tables identifiers Johan Hovold
2022-11-05 21:39 ` Dmitry Baryshkov
2022-11-05 14:59 ` [PATCH v5 09/16] phy: qcom-qmp-pcie: add register init helper Johan Hovold
2022-11-05 14:59 ` [PATCH v5 10/16] dt-bindings: phy: qcom,qmp-pcie: rename current bindings Johan Hovold
2022-11-05 14:59 ` [PATCH v5 11/16] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings Johan Hovold
2022-11-05 14:59 ` [PATCH v5 12/16] phy: qcom-qmp-pcie: restructure PHY creation Johan Hovold
2022-11-05 14:59 ` [PATCH v5 13/16] phy: qcom-qmp-pcie: fix initialisation reset Johan Hovold
2022-11-05 14:59 ` Johan Hovold [this message]
2022-11-05 14:59 ` [PATCH v5 15/16] phy: qcom-qmp-pcie: add support for sc8280xp Johan Hovold
2022-11-05 14:59 ` [PATCH v5 16/16] phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs Johan Hovold
2022-11-10 7:05 ` [PATCH v5 00/16] phy: qcom-qmp-pcie: add support for sc8280xp Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221105145939.20318-15-johan+linaro@kernel.org \
--to=johan+linaro@kernel.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).