From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Frank Wunderlich <frank-w@public-files.de>,
Matthias Brugger <matthias.bgg@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Sam Shih <sam.shih@mediatek.com>
Subject: [RFC v3 05/11] arm64: dts: mt7986: add mmc related device nodes
Date: Sun, 6 Nov 2022 09:50:28 +0100 [thread overview]
Message-ID: <20221106085034.12582-6-linux@fw-web.de> (raw)
In-Reply-To: <20221106085034.12582-1-linux@fw-web.de>
From: Sam Shih <sam.shih@mediatek.com>
This patch adds mmc support for MT7986.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v3:
- fix pullups/pulldowns for mt7986a-rfb to have generic bias-pull-*
v2:
- update mmc-node because clocks changed
---
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 87 ++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 15 ++++
2 files changed, 102 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 2b5d7ea31b4d..e1a0331aaa5f 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -5,6 +5,8 @@
*/
/dts-v1/;
+#include <dt-bindings/pinctrl/mt65xx.h>
+
#include "mt7986a.dtsi"
/ {
@@ -24,6 +26,15 @@ memory@40000000 {
reg = <0 0x40000000 0 0x40000000>;
};
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
@@ -76,7 +87,83 @@ switch: switch@0 {
};
};
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ hs400-ds-delay = <0x14014>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
&pio {
+ mmc0_pins_default: mmc0-pins {
+ mux {
+ function = "emmc";
+ groups = "emmc_51";
+ };
+ conf-cmd-dat {
+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+ input-enable;
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ conf-clk {
+ pins = "EMMC_CK";
+ drive-strength = <6>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-ds {
+ pins = "EMMC_DSL";
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-rst {
+ pins = "EMMC_RSTB";
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ };
+
+ mmc0_pins_uhs: mmc0-uhs-pins {
+ mux {
+ function = "emmc";
+ groups = "emmc_51";
+ };
+ conf-cmd-dat {
+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+ input-enable;
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ conf-clk {
+ pins = "EMMC_CK";
+ drive-strength = <6>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-ds {
+ pins = "EMMC_DSL";
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-rst {
+ pins = "EMMC_RSTB";
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ };
+
spi_flash_pins: spi-flash-pins {
mux {
function = "spi";
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 1c7a973c28ca..32c26b239ae6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -284,6 +284,21 @@ ssusb: usb@11200000 {
status = "disabled";
};
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt7986-mmc";
+ reg = <0 0x11230000 0 0x1000>,
+ <0 0x11c20000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+ <&infracfg CLK_INFRA_MSDC_HCK_CK>,
+ <&infracfg CLK_INFRA_MSDC_CK>,
+ <&infracfg CLK_INFRA_MSDC_133M_CK>,
+ <&infracfg CLK_INFRA_MSDC_66M_CK>;
+ clock-names = "source", "hclk", "source_cg", "bus_clk",
+ "sys_cg";
+ status = "disabled";
+ };
+
usb_phy: t-phy@11e10000 {
compatible = "mediatek,mt7986-tphy",
"mediatek,generic-tphy-v2";
--
2.34.1
next prev parent reply other threads:[~2022-11-06 8:50 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-06 8:50 [RFC v3 00/11] Add BananaPi R3 Frank Wunderlich
2022-11-06 8:50 ` [RFC v3 01/11] arm64: dts: mt7986: harmonize device node order Frank Wunderlich
2022-11-11 8:55 ` Matthias Brugger
2022-11-11 9:05 ` Matthias Brugger
2022-11-06 8:50 ` [RFC v3 02/11] arm64: dts: mt7986: add spi related device nodes Frank Wunderlich
2022-11-11 8:54 ` Matthias Brugger
2022-11-06 8:50 ` [RFC v3 03/11] arm64: dts: mt7986: add usb " Frank Wunderlich
2022-11-11 8:52 ` Matthias Brugger
2022-11-06 8:50 ` [RFC v3 04/11] arm64: dts: mt7986: add crypto " Frank Wunderlich
2022-11-11 8:56 ` Matthias Brugger
2022-11-06 8:50 ` Frank Wunderlich [this message]
2022-11-11 8:58 ` [RFC v3 05/11] arm64: dts: mt7986: add mmc " Matthias Brugger
2022-11-11 12:45 ` Aw: " Frank Wunderlich
2022-11-06 8:50 ` [RFC v3 06/11] arm64: dts: mt7986: add i2c node Frank Wunderlich
2022-11-11 9:06 ` Matthias Brugger
2022-11-06 8:50 ` [RFC v3 07/11] arm64: dts: mt7986: add pcie related device nodes Frank Wunderlich
2022-11-06 8:50 ` [RFC v3 08/11] dt-bindings: arm64: dts: mediatek: add compatible for bananapi r3 Frank Wunderlich
2022-11-06 8:50 ` [RFC v3 09/11] arm64: dts: mt7986: add Bananapi R3 Frank Wunderlich
2022-11-06 8:50 ` [RFC v3 10/11] arm64: dts: mt7986: add PCIe nodes to BananaPi-R3 Frank Wunderlich
2022-11-06 8:50 ` [RFC v3 11/11] arm64: dts: mt7986: add BPI-R3 nand/nor overlays Frank Wunderlich
2022-11-11 9:16 ` Matthias Brugger
2022-11-15 16:50 ` Aw: " Frank Wunderlich
2022-11-18 21:23 ` Rob Herring
2022-11-10 17:03 ` Aw: [RFC v3 00/11] Add BananaPi R3 Frank Wunderlich
2022-11-11 9:17 ` Matthias Brugger
2022-11-11 12:37 ` Aw: " Frank Wunderlich
2022-11-13 22:28 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221106085034.12582-6-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=devicetree@vger.kernel.org \
--cc=frank-w@public-files.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sam.shih@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).