From: Johan Hovold <johan+linaro@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH 9/9] arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller
Date: Thu, 10 Nov 2022 11:35:58 +0100 [thread overview]
Message-ID: <20221110103558.12690-10-johan+linaro@kernel.org> (raw)
In-Reply-To: <20221110103558.12690-1-johan+linaro@kernel.org>
Enable the Qualcomm QCNFA765 Wireless Network Adapter connected to
PCIe4.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
.../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 2285c8311f0f..e8963a51e189 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -141,6 +141,22 @@ vreg_nvme: regulator-nvme {
regulator-boot-on;
};
+ vreg_wlan: regulator-wlan {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC_WLAN_3R9";
+ regulator-min-microvolt = <3900000>;
+ regulator-max-microvolt = <3900000>;
+
+ gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hastings_reg_en>;
+
+ regulator-boot-on;
+ };
+
vreg_wwan: regulator-wwan {
compatible = "regulator-fixed";
@@ -304,6 +320,25 @@ &pcie3a_phy {
status = "okay";
};
+&pcie4 {
+ perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_wlan>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie4_default>;
+
+ status = "okay";
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l6d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ status = "okay";
+};
+
&pmc8280c_lpg {
status = "okay";
};
@@ -646,6 +681,13 @@ edp_bl_pwm: edp-bl-pwm-state {
};
};
+&pmr735a_gpios {
+ hastings_reg_en: hastings-reg-en-state {
+ pins = "gpio1";
+ function = "normal";
+ };
+};
+
&tlmm {
gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
@@ -729,6 +771,29 @@ wake-n-pins {
};
};
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio140";
+ function = "pcie4_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio141";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ wake-n-pins {
+ pins = "gpio139";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
qup0_i2c4_default: qup0-i2c4-default-state {
pins = "gpio171", "gpio172";
function = "qup4";
--
2.37.4
next prev parent reply other threads:[~2022-11-10 10:38 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-10 10:35 [PATCH 0/9] arm64: dts: qcom: sc8280xp/sa8540p: add support for PCIe Johan Hovold
2022-11-10 10:35 ` [PATCH 1/9] arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes Johan Hovold
2022-11-10 10:58 ` Konrad Dybcio
2022-11-10 10:35 ` [PATCH 2/9] arm64: dts: qcom: sa8295p-adp: enable PCIe Johan Hovold
2022-11-10 11:02 ` Konrad Dybcio
2022-11-10 10:35 ` [PATCH 3/9] arm64: dts: qcom: sc8280xp-crd: rename backlight and misc regulators Johan Hovold
2022-11-10 11:07 ` Konrad Dybcio
2022-11-10 10:35 ` [PATCH 4/9] arm64: dts: qcom: sc8280xp-crd: enable NVMe SSD Johan Hovold
2022-11-10 11:06 ` Konrad Dybcio
2022-11-11 16:22 ` Johan Hovold
2022-11-12 13:01 ` Konrad Dybcio
2022-11-10 10:35 ` [PATCH 5/9] arm64: dts: qcom: sc8280xp-crd: enable SDX55 modem Johan Hovold
2022-11-10 10:35 ` [PATCH 6/9] arm64: dts: qcom: sc8280xp-crd: enable WiFi controller Johan Hovold
2022-11-10 11:35 ` Manivannan Sadhasivam
2022-11-11 16:27 ` Johan Hovold
2022-11-11 20:40 ` Bjorn Andersson
2022-11-12 14:39 ` Manivannan Sadhasivam
2022-11-10 10:35 ` [PATCH 7/9] arm64: dts: qcom: sc8280xp-x13s: enable NVMe SSD Johan Hovold
2022-11-10 10:35 ` [PATCH 8/9] arm64: dts: qcom: sc8280xp-x13s: enable modem Johan Hovold
2022-11-10 10:35 ` Johan Hovold [this message]
2022-11-12 3:51 ` [PATCH 0/9] arm64: dts: qcom: sc8280xp/sa8540p: add support for PCIe Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221110103558.12690-10-johan+linaro@kernel.org \
--to=johan+linaro@kernel.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).