[PATCH 4/9] arm64: dts: qcom: sc8280xp-crd: enable NVMe SSD

[Johan Hovold <johan+linaro@kernel.org>]

Enable the NVMe SSD connected to PCIe2.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 63 +++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 0801bd8c44fb..fd2bdfd1126b 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -50,6 +50,20 @@ vreg_edp_bl: regulator-edp-bl {
 		regulator-boot-on;
 	};
 
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+	};
+
 	vreg_misc_3p3: regulator-misc-3p3 {
 		compatible = "regulator-fixed";
 
@@ -178,6 +192,25 @@ vreg_l9d: ldo9 {
 	};
 };
 
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
 &pmc8280c_lpg {
 	status = "okay";
 };
@@ -393,6 +426,36 @@ reset-pins {
 		};
 	};
 
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+		       pins = "gpio145";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+
 	qup0_i2c4_default: qup0-i2c4-default-state {
 		pins = "gpio171", "gpio172";
 		function = "qup4";
-- 
2.37.4