From: Johan Hovold <johan+linaro@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH 7/9] arm64: dts: qcom: sc8280xp-x13s: enable NVMe SSD
Date: Thu, 10 Nov 2022 11:35:56 +0100 [thread overview]
Message-ID: <20221110103558.12690-8-johan+linaro@kernel.org> (raw)
In-Reply-To: <20221110103558.12690-1-johan+linaro@kernel.org>
Enable the NVMe SSD connected to PCIe2.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
.../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 72 +++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 4424d5b2c578..8fce60b0d16c 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -124,6 +124,22 @@ vreg_misc_3p3: regulator-misc-3p3 {
regulator-boot-on;
regulator-always-on;
};
+
+ vreg_nvme: regulator-nvme {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3_SSD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nvme_reg_en>;
+
+ regulator-boot-on;
+ };
};
&apps_rsc {
@@ -211,6 +227,13 @@ vreg_l4d: ldo4 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+ vreg_l6d: ldo6 {
+ regulator-name = "vreg_l6d";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
vreg_l7d: ldo7 {
regulator-name = "vreg_l7d";
regulator-min-microvolt = <3072000>;
@@ -227,6 +250,25 @@ vreg_l9d: ldo9 {
};
};
+&pcie2a {
+ perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_nvme>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2a_default>;
+
+ status = "okay";
+};
+
+&pcie2a_phy {
+ vdda-phy-supply = <&vreg_l6d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ status = "okay";
+};
+
&pmc8280c_lpg {
status = "okay";
};
@@ -592,6 +634,36 @@ hall_int_state: hall-int-state {
bias-disable;
};
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio135";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie2a_default: pcie2a-default-state {
+ clkreq-n-pins {
+ pins = "gpio142";
+ function = "pcie2a_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio143";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ wake-n-pins {
+ pins = "gpio145";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
qup0_i2c4_default: qup0-i2c4-default-state {
pins = "gpio171", "gpio172";
function = "qup4";
--
2.37.4
next prev parent reply other threads:[~2022-11-10 10:38 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-10 10:35 [PATCH 0/9] arm64: dts: qcom: sc8280xp/sa8540p: add support for PCIe Johan Hovold
2022-11-10 10:35 ` [PATCH 1/9] arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes Johan Hovold
2022-11-10 10:58 ` Konrad Dybcio
2022-11-10 10:35 ` [PATCH 2/9] arm64: dts: qcom: sa8295p-adp: enable PCIe Johan Hovold
2022-11-10 11:02 ` Konrad Dybcio
2022-11-10 10:35 ` [PATCH 3/9] arm64: dts: qcom: sc8280xp-crd: rename backlight and misc regulators Johan Hovold
2022-11-10 11:07 ` Konrad Dybcio
2022-11-10 10:35 ` [PATCH 4/9] arm64: dts: qcom: sc8280xp-crd: enable NVMe SSD Johan Hovold
2022-11-10 11:06 ` Konrad Dybcio
2022-11-11 16:22 ` Johan Hovold
2022-11-12 13:01 ` Konrad Dybcio
2022-11-10 10:35 ` [PATCH 5/9] arm64: dts: qcom: sc8280xp-crd: enable SDX55 modem Johan Hovold
2022-11-10 10:35 ` [PATCH 6/9] arm64: dts: qcom: sc8280xp-crd: enable WiFi controller Johan Hovold
2022-11-10 11:35 ` Manivannan Sadhasivam
2022-11-11 16:27 ` Johan Hovold
2022-11-11 20:40 ` Bjorn Andersson
2022-11-12 14:39 ` Manivannan Sadhasivam
2022-11-10 10:35 ` Johan Hovold [this message]
2022-11-10 10:35 ` [PATCH 8/9] arm64: dts: qcom: sc8280xp-x13s: enable modem Johan Hovold
2022-11-10 10:35 ` [PATCH 9/9] arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller Johan Hovold
2022-11-12 3:51 ` [PATCH 0/9] arm64: dts: qcom: sc8280xp/sa8540p: add support for PCIe Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221110103558.12690-8-johan+linaro@kernel.org \
--to=johan+linaro@kernel.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).