From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Frank Wunderlich <frank-w@public-files.de>,
Ryder Lee <ryder.lee@mediatek.com>,
Jianjun Wang <jianjun.wang@mediatek.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Paolo Abeni <pabeni@redhat.com>,
Lorenzo Bianconi <lorenzo@kernel.org>,
Bo Jiao <Bo.Jiao@mediatek.com>,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-phy@lists.infradead.org, linux-usb@vger.kernel.org,
Sam Shih <sam.shih@mediatek.com>
Subject: [PATCH v4 08/11] arm64: dts: mt7986: add mmc related device nodes
Date: Sat, 12 Nov 2022 10:15:15 +0100 [thread overview]
Message-ID: <20221112091518.7846-9-linux@fw-web.de> (raw)
In-Reply-To: <20221112091518.7846-1-linux@fw-web.de>
From: Sam Shih <sam.shih@mediatek.com>
This patch adds mmc support for MT7986.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v3:
- fix pullups/pulldowns for mt7986a-rfb to have generic bias-pull-*
v2:
- update mmc-node because clocks changed
---
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 87 ++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 15 ++++
2 files changed, 102 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 2b5d7ea31b4d..e1a0331aaa5f 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -5,6 +5,8 @@
*/
/dts-v1/;
+#include <dt-bindings/pinctrl/mt65xx.h>
+
#include "mt7986a.dtsi"
/ {
@@ -24,6 +26,15 @@ memory@40000000 {
reg = <0 0x40000000 0 0x40000000>;
};
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
@@ -76,7 +87,83 @@ switch: switch@0 {
};
};
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ hs400-ds-delay = <0x14014>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
&pio {
+ mmc0_pins_default: mmc0-pins {
+ mux {
+ function = "emmc";
+ groups = "emmc_51";
+ };
+ conf-cmd-dat {
+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+ input-enable;
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ conf-clk {
+ pins = "EMMC_CK";
+ drive-strength = <6>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-ds {
+ pins = "EMMC_DSL";
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-rst {
+ pins = "EMMC_RSTB";
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ };
+
+ mmc0_pins_uhs: mmc0-uhs-pins {
+ mux {
+ function = "emmc";
+ groups = "emmc_51";
+ };
+ conf-cmd-dat {
+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+ input-enable;
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ conf-clk {
+ pins = "EMMC_CK";
+ drive-strength = <6>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-ds {
+ pins = "EMMC_DSL";
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-rst {
+ pins = "EMMC_RSTB";
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ };
+
spi_flash_pins: spi-flash-pins {
mux {
function = "spi";
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 2bcf48890ba8..4b85a645fd55 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -304,6 +304,21 @@ ssusb: usb@11200000 {
status = "disabled";
};
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt7986-mmc";
+ reg = <0 0x11230000 0 0x1000>,
+ <0 0x11c20000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+ <&infracfg CLK_INFRA_MSDC_HCK_CK>,
+ <&infracfg CLK_INFRA_MSDC_CK>,
+ <&infracfg CLK_INFRA_MSDC_133M_CK>,
+ <&infracfg CLK_INFRA_MSDC_66M_CK>;
+ clock-names = "source", "hclk", "source_cg", "bus_clk",
+ "sys_cg";
+ status = "disabled";
+ };
+
usb_phy: t-phy@11e10000 {
compatible = "mediatek,mt7986-tphy",
"mediatek,generic-tphy-v2";
--
2.34.1
next prev parent reply other threads:[~2022-11-12 9:15 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-12 9:15 [PATCH v4 00/11] Add BananaPi R3 Frank Wunderlich
2022-11-12 9:15 ` [PATCH v4 01/11] arm64: dts: mt7986: move wed_pcie node Frank Wunderlich
2022-11-14 11:46 ` AngeloGioacchino Del Regno
2022-11-12 9:15 ` [PATCH v4 02/11] dt-bindings: phy: mediatek,tphy: add support for mt7986 Frank Wunderlich
2022-11-12 11:17 ` Aw: " Frank Wunderlich
2022-11-14 6:05 ` Chunfeng Yun (云春峰)
2022-11-14 11:45 ` AngeloGioacchino Del Regno
2022-11-12 9:15 ` [PATCH v4 03/11] dt-bindings: usb: mtk-xhci: " Frank Wunderlich
2022-11-12 11:18 ` Aw: " Frank Wunderlich
2022-11-14 6:06 ` Chunfeng Yun (云春峰)
2022-11-14 11:45 ` AngeloGioacchino Del Regno
2022-11-12 9:15 ` [PATCH v4 04/11] dt-bindings: PCI: mediatek-gen3: add SoC based clock config Frank Wunderlich
2022-11-13 7:59 ` Frank Wunderlich
2022-11-14 11:46 ` AngeloGioacchino Del Regno
2022-11-12 9:15 ` [PATCH v4 05/11] dt-bindings: PCI: mediatek-gen3: add support for mt7986 Frank Wunderlich
2022-11-13 7:56 ` Frank Wunderlich
2022-11-12 9:15 ` [PATCH v4 06/11] arm64: dts: mt7986: add spi related device nodes Frank Wunderlich
2022-11-14 11:46 ` AngeloGioacchino Del Regno
2022-11-12 9:15 ` [PATCH v4 07/11] arm64: dts: mt7986: add usb " Frank Wunderlich
2022-11-14 6:15 ` Chunfeng Yun (云春峰)
2022-11-14 11:45 ` AngeloGioacchino Del Regno
2022-11-12 9:15 ` Frank Wunderlich [this message]
2022-11-14 11:45 ` [PATCH v4 08/11] arm64: dts: mt7986: add mmc " AngeloGioacchino Del Regno
2022-11-12 9:15 ` [PATCH v4 09/11] arm64: dts: mt7986: add pcie " Frank Wunderlich
2022-11-14 11:48 ` AngeloGioacchino Del Regno
2022-11-12 9:15 ` [PATCH v4 10/11] arm64: dts: mt7986: add Bananapi R3 Frank Wunderlich
2022-11-14 11:50 ` AngeloGioacchino Del Regno
2022-11-14 12:03 ` Frank Wunderlich
2022-11-14 12:10 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221112091518.7846-9-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=Bo.Jiao@mediatek.com \
--cc=bhelgaas@google.com \
--cc=chunfeng.yun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=frank-w@public-files.de \
--cc=gregkh@linuxfoundation.org \
--cc=jianjun.wang@mediatek.com \
--cc=kishon@ti.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=pabeni@redhat.com \
--cc=robh+dt@kernel.org \
--cc=ryder.lee@mediatek.com \
--cc=sam.shih@mediatek.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).