* [PATCH 1/5] arm64: dts: rockchip: Move most of Odroid Go Advance DTS into a DTSI
[not found] <20221112141840.516224-1-maccraft123mc@gmail.com>
@ 2022-11-12 14:18 ` Maya Matuszczyk
2022-11-12 14:18 ` [PATCH 2/5] dt-bindings: arm: rockchip: Add more RK3326 devices Maya Matuszczyk
` (3 subsequent siblings)
4 siblings, 0 replies; 5+ messages in thread
From: Maya Matuszczyk @ 2022-11-12 14:18 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Heiko Stuebner
Cc: João H . Spies, Chris Morgan, Maya Matuszczyk, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
To support more devices that are clones of this device or minor
revisions without duplication move msot of go2's dts into a dtsi file.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
---
.../boot/dts/rockchip/rk3326-odroid-go.dtsi | 600 +++++++++++++++++
.../boot/dts/rockchip/rk3326-odroid-go2.dts | 620 +-----------------
2 files changed, 609 insertions(+), 611 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
new file mode 100644
index 000000000000..bab99b1b4299
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
@@ -0,0 +1,600 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+ aliases {
+ mmc0 = &sdmmc;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ power-supply = <&vcc_bl>;
+ pwms = <&pwm1 0 25000 0>;
+ };
+
+ builtin_gamepad: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&btn_pins>;
+
+ button-sw1 {
+ gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "DPAD-UP";
+ linux,code = <BTN_DPAD_UP>;
+ };
+ button-sw2 {
+ gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+ label = "DPAD-DOWN";
+ linux,code = <BTN_DPAD_DOWN>;
+ };
+ button-sw3 {
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ label = "DPAD-LEFT";
+ linux,code = <BTN_DPAD_LEFT>;
+ };
+ button-sw4 {
+ gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "DPAD-RIGHT";
+ linux,code = <BTN_DPAD_RIGHT>;
+ };
+ button-sw5 {
+ gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "BTN-A";
+ linux,code = <BTN_EAST>;
+ };
+ button-sw6 {
+ gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "BTN-B";
+ linux,code = <BTN_SOUTH>;
+ };
+ button-sw7 {
+ gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+ label = "BTN-Y";
+ linux,code = <BTN_WEST>;
+ };
+ button-sw8 {
+ gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "BTN-X";
+ linux,code = <BTN_NORTH>;
+ };
+ button-sw9 {
+ gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "F1";
+ linux,code = <BTN_TRIGGER_HAPPY1>;
+ };
+ button-sw10 {
+ gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+ label = "F2";
+ linux,code = <BTN_TRIGGER_HAPPY2>;
+ };
+ button-sw11 {
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "F3";
+ linux,code = <BTN_TRIGGER_HAPPY3>;
+ };
+ button-sw12 {
+ gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+ label = "F4";
+ linux,code = <BTN_TRIGGER_HAPPY4>;
+ };
+ button-sw13 {
+ gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+ label = "F5";
+ linux,code = <BTN_TRIGGER_HAPPY5>;
+ };
+ button-sw14 {
+ gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "F6";
+ linux,code = <BTN_TRIGGER_HAPPY6>;
+ };
+ button-sw15 {
+ gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+ label = "TOP-LEFT";
+ linux,code = <BTN_TL>;
+ };
+ button-sw16 {
+ gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "TOP-RIGHT";
+ linux,code = <BTN_TR>;
+ };
+ };
+
+ leds: gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&blue_led_pin>;
+
+ blue_led: led-0 {
+ label = "blue:heartbeat";
+ gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ rk817-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Analog";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphones",
+ "Speaker", "Speaker";
+ simple-audio-card,routing =
+ "MICL", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR",
+ "Speaker", "SPKO";
+
+ simple-audio-card,codec {
+ sound-dai = <&rk817>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_2ch>;
+ };
+ };
+
+ vccsys: vccsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v8_sys";
+ regulator-always-on;
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ };
+
+ vcc_host: vcc_host {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&usb_midu>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+ assigned-clocks = <&cru PLL_NPLL>,
+ <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+ <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+ <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
+ <&cru PLL_CPLL>;
+
+ assigned-clock-rates = <1188000000>,
+ <200000000>, <200000000>,
+ <150000000>, <150000000>,
+ <100000000>, <200000000>,
+ <17000000>;
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&dsi {
+ status = "okay";
+
+ ports {
+ mipi_out: port@1 {
+ reg = <1>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+
+ internal_display: panel@0 {
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc_lcd>;
+ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+ rotation = <270>;
+ vdd-supply = <&vcc_lcd>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+};
+
+&dsi_dphy {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_logic>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-falling-time-ns = <16>;
+ i2c-scl-rising-time-ns = <280>;
+ status = "okay";
+
+ rk817: pmic@20 {
+ compatible = "rockchip,rk817";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+ clock-output-names = "rk808-clkout1", "xin32k";
+ clock-names = "mclk";
+ clocks = <&cru SCLK_I2S1_OUT>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+ wakeup-source;
+ #clock-cells = <1>;
+ #sound-dai-cells = <0>;
+
+ vcc1-supply = <&vccsys>;
+ vcc2-supply = <&vccsys>;
+ vcc3-supply = <&vccsys>;
+ vcc4-supply = <&vccsys>;
+ vcc5-supply = <&vccsys>;
+ vcc6-supply = <&vccsys>;
+ vcc7-supply = <&vccsys>;
+ vcc8-supply = <&vccsys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v3: DCDC_REG4 {
+ regulator-name = "vcc_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_1v0: LDO_REG3 {
+ regulator-name = "vdd_1v0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG4 {
+ regulator-name = "vcc3v3_pmu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_sd: LDO_REG6 {
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_bl: LDO_REG7 {
+ regulator-name = "vcc_bl";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_lcd: LDO_REG8 {
+ regulator-name = "vcc_lcd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <2800000>;
+ };
+ };
+
+ LDO_REG9 {
+ /* unused */
+ };
+
+ usb_midu: BOOST {
+ regulator-name = "usb_midu";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+
+ rk817_charger: charger {
+ rockchip,resistor-sense-micro-ohms = <10000>;
+ rockchip,sleep-enter-current-microamp = <300000>;
+ rockchip,sleep-filter-current-microamp = <100000>;
+ };
+
+ rk817_codec: codec {
+ rockchip,mic-in-differential;
+ };
+ };
+};
+
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
+&i2c1 {
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+/* I2S 1 Channel Used */
+&i2s1_2ch {
+ status = "okay";
+};
+
+&io_domains {
+ vccio1-supply = <&vcc_3v3>;
+ vccio2-supply = <&vccio_sd>;
+ vccio3-supply = <&vcc_3v3>;
+ vccio4-supply = <&vcc_3v3>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc {
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sfc {
+ pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <108000000>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+
+ u2phy_host: host-port {
+ status = "okay";
+ };
+
+ u2phy_otg: otg-port {
+ status = "disabled";
+ };
+};
+
+&usb20_otg {
+ status = "okay";
+};
+
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer &uart1_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m1_xfer>;
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&pinctrl {
+ btns {
+ btn_pins: btn-pins {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ headphone {
+ hp_det: hp-det {
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ leds {
+ blue_led_pin: blue-led-pin {
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dc_det: dc-det {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pmic_int: pmic-int {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ soc_slppin_gpio: soc_slppin_gpio {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+
+ soc_slppin_rst: soc_slppin_rst {
+ rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+ };
+
+ soc_slppin_slp: soc_slppin_slp {
+ rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index 72899a714310..4702183b673c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -2,30 +2,21 @@
/*
* Copyright (c) 2019 Hardkernel Co., Ltd
* Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
*/
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3326.dtsi"
+#include "rk3326-odroid-go.dtsi"
/ {
model = "ODROID-GO Advance";
compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
- aliases {
- mmc0 = &sdmmc;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- adc-joystick {
+ analog_sticks: adc-joystick {
compatible = "adc-joystick";
io-channels = <&saradc 1>,
<&saradc 2>;
+ poll-interval = <60>;
#address-cells = <1>;
#size-cells = <0>;
@@ -46,12 +37,6 @@ axis@1 {
};
};
- backlight: backlight {
- compatible = "pwm-backlight";
- power-supply = <&vcc_bl>;
- pwms = <&pwm1 0 25000 0>;
- };
-
battery: battery {
compatible = "simple-battery";
charge-full-design-microamp-hours = <3000000>;
@@ -63,606 +48,19 @@ battery: battery {
voltage-min-design-microvolt = <3500000>;
ocv-capacity-celsius = <20>;
- ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+ ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
<3574170 0>;
};
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&btn_pins>;
-
- /*
- * *** ODROIDGO2-Advance Switch layout ***
- * |------------------------------------------------|
- * | sw15 sw16 |
- * |------------------------------------------------|
- * | sw1 |-------------------| sw8 |
- * | sw3 sw4 | | sw7 sw5 |
- * | sw2 | LCD Display | sw6 |
- * | | | |
- * | |-------------------| |
- * | sw9 sw10 sw11 sw12 sw13 sw14 |
- * |------------------------------------------------|
- */
-
- button-sw1 {
- gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
- label = "DPAD-UP";
- linux,code = <BTN_DPAD_UP>;
- };
- button-sw2 {
- gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
- label = "DPAD-DOWN";
- linux,code = <BTN_DPAD_DOWN>;
- };
- button-sw3 {
- gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
- label = "DPAD-LEFT";
- linux,code = <BTN_DPAD_LEFT>;
- };
- button-sw4 {
- gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
- label = "DPAD-RIGHT";
- linux,code = <BTN_DPAD_RIGHT>;
- };
- button-sw5 {
- gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
- label = "BTN-A";
- linux,code = <BTN_EAST>;
- };
- button-sw6 {
- gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "BTN-B";
- linux,code = <BTN_SOUTH>;
- };
- button-sw7 {
- gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
- label = "BTN-Y";
- linux,code = <BTN_WEST>;
- };
- button-sw8 {
- gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
- label = "BTN-X";
- linux,code = <BTN_NORTH>;
- };
- button-sw9 {
- gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
- label = "F1";
- linux,code = <BTN_TRIGGER_HAPPY1>;
- };
- button-sw10 {
- gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
- label = "F2";
- linux,code = <BTN_TRIGGER_HAPPY2>;
- };
- button-sw11 {
- gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
- label = "F3";
- linux,code = <BTN_TRIGGER_HAPPY3>;
- };
- button-sw12 {
- gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
- label = "F4";
- linux,code = <BTN_TRIGGER_HAPPY4>;
- };
- button-sw13 {
- gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
- label = "F5";
- linux,code = <BTN_TRIGGER_HAPPY5>;
- };
- button-sw14 {
- gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "F6";
- linux,code = <BTN_TRIGGER_HAPPY6>;
- };
- button-sw15 {
- gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
- label = "TOP-LEFT";
- linux,code = <BTN_TL>;
- };
- button-sw16 {
- gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
- label = "TOP-RIGHT";
- linux,code = <BTN_TR>;
- };
- };
-
- leds: gpio-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&blue_led_pin>;
-
- blue_led: led-0 {
- label = "blue:heartbeat";
- gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- rk817-sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "Analog";
- simple-audio-card,format = "i2s";
- simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,widgets =
- "Microphone", "Mic Jack",
- "Headphone", "Headphones",
- "Speaker", "Speaker";
- simple-audio-card,routing =
- "MICL", "Mic Jack",
- "Headphones", "HPOL",
- "Headphones", "HPOR",
- "Speaker", "SPKO";
-
- simple-audio-card,codec {
- sound-dai = <&rk817>;
- };
-
- simple-audio-card,cpu {
- sound-dai = <&i2s1_2ch>;
- };
- };
-
- vccsys: vccsys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v8_sys";
- regulator-always-on;
- regulator-min-microvolt = <3800000>;
- regulator-max-microvolt = <3800000>;
- };
-
- vcc_host: vcc_host {
- compatible = "regulator-fixed";
- regulator-name = "vcc_host";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&usb_midu>;
- };
-};
-
-&cpu0 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu1 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu2 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu3 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cru {
- assigned-clocks = <&cru PLL_NPLL>,
- <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
- <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
- <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
- <&cru PLL_CPLL>;
-
- assigned-clock-rates = <1188000000>,
- <200000000>, <200000000>,
- <150000000>, <150000000>,
- <100000000>, <200000000>,
- <17000000>;
};
-&display_subsystem {
- status = "okay";
+&internal_display {
+ compatible = "elida,kd35t133";
};
-&dsi {
- status = "okay";
-
- ports {
- mipi_out: port@1 {
- reg = <1>;
-
- mipi_out_panel: endpoint {
- remote-endpoint = <&mipi_in_panel>;
- };
- };
- };
-
- panel@0 {
- compatible = "elida,kd35t133";
- reg = <0>;
- backlight = <&backlight>;
- iovcc-supply = <&vcc_lcd>;
- reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
- rotation = <270>;
- vdd-supply = <&vcc_lcd>;
-
- port {
- mipi_in_panel: endpoint {
- remote-endpoint = <&mipi_out_panel>;
- };
- };
- };
-};
-
-&dsi_dphy {
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_logic>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-falling-time-ns = <16>;
- i2c-scl-rising-time-ns = <280>;
- status = "okay";
-
- rk817: pmic@20 {
- compatible = "rockchip,rk817";
- reg = <0x20>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
- clock-output-names = "rk808-clkout1", "xin32k";
- clock-names = "mclk";
- clocks = <&cru SCLK_I2S1_OUT>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
- wakeup-source;
- #clock-cells = <1>;
- #sound-dai-cells = <0>;
-
- vcc1-supply = <&vccsys>;
- vcc2-supply = <&vccsys>;
- vcc3-supply = <&vccsys>;
- vcc4-supply = <&vccsys>;
- vcc5-supply = <&vccsys>;
- vcc6-supply = <&vccsys>;
- vcc7-supply = <&vccsys>;
- vcc8-supply = <&vccsys>;
-
- regulators {
- vdd_logic: DCDC_REG1 {
- regulator-name = "vdd_logic";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1150000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <950000>;
- };
- };
-
- vdd_arm: DCDC_REG2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <950000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_3v3: DCDC_REG4 {
- regulator-name = "vcc_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_1v8: LDO_REG2 {
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vdd_1v0: LDO_REG3 {
- regulator-name = "vdd_1v0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc3v3_pmu: LDO_REG4 {
- regulator-name = "vcc3v3_pmu";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-name = "vccio_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_sd: LDO_REG6 {
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_bl: LDO_REG7 {
- regulator-name = "vcc_bl";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_lcd: LDO_REG8 {
- regulator-name = "vcc_lcd";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <2800000>;
- };
- };
-
- vcc_cam: LDO_REG9 {
- regulator-name = "vcc_cam";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- usb_midu: BOOST {
- regulator-name = "usb_midu";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5400000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
-
- rk817_charger: charger {
- monitored-battery = <&battery>;
- rockchip,resistor-sense-micro-ohms = <10000>;
- rockchip,sleep-enter-current-microamp = <300000>;
- rockchip,sleep-filter-current-microamp = <100000>;
- };
-
- rk817_codec: codec {
- rockchip,mic-in-differential;
- };
- };
-};
-
-/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
-&i2c1 {
- clock-frequency = <400000>;
- status = "okay";
-};
-
-/* I2S 1 Channel Used */
-&i2s1_2ch {
- status = "okay";
-};
-
-&io_domains {
- vccio1-supply = <&vcc_3v3>;
- vccio2-supply = <&vccio_sd>;
- vccio3-supply = <&vcc_3v3>;
- vccio4-supply = <&vcc_3v3>;
- vccio5-supply = <&vcc_3v3>;
- vccio6-supply = <&vcc_3v3>;
- status = "okay";
-};
-
-&pmu_io_domains {
- pmuio1-supply = <&vcc3v3_pmu>;
- pmuio2-supply = <&vcc3v3_pmu>;
- status = "okay";
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc_1v8>;
- status = "okay";
-};
-
-&sdmmc {
- cap-sd-highspeed;
- card-detect-delay = <200>;
- cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vccio_sd>;
- status = "okay";
-};
-
-&sfc {
- pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <108000000>;
- spi-rx-bus-width = <2>;
- spi-tx-bus-width = <1>;
- };
-};
-
-&tsadc {
- status = "okay";
-};
-
-&u2phy {
- status = "okay";
-
- u2phy_host: host-port {
- status = "okay";
- };
-
- u2phy_otg: otg-port {
- status = "disabled";
- };
-};
-
-&usb20_otg {
- status = "okay";
-};
-
-/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_xfer &uart1_cts>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2m1_xfer>;
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&pinctrl {
- btns {
- btn_pins: btn-pins {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- headphone {
- hp_det: hp-det {
- rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- leds {
- blue_led_pin: blue-led-pin {
- rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- dc_det: dc-det {
- rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pmic_int: pmic-int {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- soc_slppin_gpio: soc_slppin_gpio {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
- };
-
- soc_slppin_rst: soc_slppin_rst {
- rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
- };
-
- soc_slppin_slp: soc_slppin_slp {
- rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
- };
- };
+&rk817_charger {
+ monitored-battery = <&battery>;
};
--
2.38.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 3/5] arm64: dts: rockchip: Add Odroid Go Advance Black Edition
[not found] <20221112141840.516224-1-maccraft123mc@gmail.com>
2022-11-12 14:18 ` [PATCH 1/5] arm64: dts: rockchip: Move most of Odroid Go Advance DTS into a DTSI Maya Matuszczyk
2022-11-12 14:18 ` [PATCH 2/5] dt-bindings: arm: rockchip: Add more RK3326 devices Maya Matuszczyk
@ 2022-11-12 14:18 ` Maya Matuszczyk
2022-11-12 14:18 ` [PATCH 4/5] arm64: dts: rockchip: Add Odroid Go Super Maya Matuszczyk
2022-11-12 14:18 ` [PATCH 5/5] arm64: dts: rockchip: Add Anbernic RG351M Maya Matuszczyk
4 siblings, 0 replies; 5+ messages in thread
From: Maya Matuszczyk @ 2022-11-12 14:18 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Heiko Stuebner
Cc: João H . Spies, Chris Morgan, Maya Matuszczyk, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
This device is a minor revision of the origin Odroid Go Advance, with
added two more buttons and a WiFi card
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/rk3326-odroid-go2-v11.dts | 156 ++++++++++++++++++
2 files changed, 157 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 8c15593c0ca4..12446f531d29 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
new file mode 100644
index 000000000000..139c898e590e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+ model = "ODROID-GO Advance Black Edition";
+ compatible = "hardkernel,rk3326-odroid-go2-v11", "rockchip,rk3326";
+
+ aliases {
+ mmc1 = &sdio;
+ };
+
+ analog_sticks: adc-joystick {
+ compatible = "adc-joystick";
+ io-channels = <&saradc 1>,
+ <&saradc 2>;
+ poll-interval = <60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ abs-flat = <10>;
+ abs-fuzz = <10>;
+ abs-range = <172 772>;
+ linux,code = <ABS_X>;
+ };
+
+ axis@1 {
+ reg = <1>;
+ abs-flat = <10>;
+ abs-fuzz = <10>;
+ abs-range = <278 815>;
+ linux,code = <ABS_Y>;
+ };
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <3000000>;
+ charge-term-current-microamp = <300000>;
+ constant-charge-current-max-microamp = <2000000>;
+ constant-charge-voltage-max-microvolt = <4200000>;
+ factory-internal-resistance-micro-ohms = <180000>;
+ voltage-max-design-microvolt = <4100000>;
+ voltage-min-design-microvolt = <3500000>;
+
+ ocv-capacity-celsius = <20>;
+ ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+ <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+ <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+ <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+ <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+ <3574170 0>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_pwrseq_pins>;
+ reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&builtin_gamepad {
+ button-sw20 {
+ gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "TOP-LEFT 2";
+ linux,code = <BTN_TL2>;
+ };
+ button-sw21 {
+ gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+ label = "TOP-RIGHT 2";
+ linux,code = <BTN_TR2>;
+ };
+};
+
+&internal_display {
+ compatible = "elida,kd35t133";
+};
+
+&rk817 {
+ regulators {
+ vcc_wifi: LDO_REG9 {
+ regulator-name = "vcc_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+ };
+};
+
+&rk817_charger {
+ monitored-battery = <&battery>;
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ vmmc-supply = <&vcc_wifi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ esp8089: wifi@1 {
+ compatible = "esp,esp8089";
+ reg = <1>;
+ };
+};
+
+&pinctrl {
+ btns {
+ btn_pins: btn-pins {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ wifi {
+ wifi_pwrseq_pins: wifi-pwrseq-pins {
+ rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB6 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+};
--
2.38.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 4/5] arm64: dts: rockchip: Add Odroid Go Super
[not found] <20221112141840.516224-1-maccraft123mc@gmail.com>
` (2 preceding siblings ...)
2022-11-12 14:18 ` [PATCH 3/5] arm64: dts: rockchip: Add Odroid Go Advance Black Edition Maya Matuszczyk
@ 2022-11-12 14:18 ` Maya Matuszczyk
2022-11-12 14:18 ` [PATCH 5/5] arm64: dts: rockchip: Add Anbernic RG351M Maya Matuszczyk
4 siblings, 0 replies; 5+ messages in thread
From: Maya Matuszczyk @ 2022-11-12 14:18 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Heiko Stuebner
Cc: João H . Spies, Chris Morgan, Maya Matuszczyk, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
This device is another revision of Odroid Go Advance, with added two
volume buttons, a second analog stick and a bigger screen that isn't yet
supported in the Mainline Kernel.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3326-odroid-go3.dts | 161 ++++++++++++++++++
2 files changed, 162 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 12446f531d29..142c83d2e5aa 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
new file mode 100644
index 000000000000..4b6c896d8abd
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+ model = "ODROID-GO Super";
+ compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326";
+
+ joystick_mux_controller: mux-controller {
+ status = "okay";
+ compatible = "gpio-mux";
+ pinctrl = <&mux_en_pins>;
+ #mux-control-cells = <0>;
+
+ mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>,
+ <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+ };
+
+ joystick_mux: adc-mux {
+ status = "okay";
+ compatible = "io-channel-mux";
+ io-channels = <&saradc 1>;
+ io-channel-names = "parent";
+ #io-channel-cells = <1>;
+
+ mux-controls = <&joystick_mux_controller>;
+
+ channels = "0", "1", "2", "3";
+ };
+
+ analog_sticks: adc-joystick {
+ compatible = "adc-joystick";
+ io-channels = <&joystick_mux 0>,
+ <&joystick_mux 1>,
+ <&joystick_mux 2>,
+ <&joystick_mux 3>;
+ poll-interval = <60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ abs-flat = <10>;
+ abs-fuzz = <10>;
+ abs-range = <180 800>;
+ linux,code = <ABS_X>;
+ };
+
+ axis@1 {
+ reg = <1>;
+ abs-flat = <10>;
+ abs-fuzz = <10>;
+ abs-range = <180 800>;
+ linux,code = <ABS_RX>;
+ };
+ axis@2 {
+ reg = <2>;
+ abs-flat = <10>;
+ abs-fuzz = <10>;
+ abs-range = <180 800>;
+ linux,code = <ABS_Y>;
+ };
+
+ axis@3 {
+ reg = <3>;
+ abs-flat = <10>;
+ abs-fuzz = <10>;
+ abs-range = <180 800>;
+ linux,code = <ABS_RY>;
+ };
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <4000000>;
+ charge-term-current-microamp = <300000>;
+ constant-charge-current-max-microamp = <2000000>;
+ constant-charge-voltage-max-microvolt = <4200000>;
+ factory-internal-resistance-micro-ohms = <180000>;
+ voltage-max-design-microvolt = <4100000>;
+ voltage-min-design-microvolt = <3500000>;
+
+ ocv-capacity-celsius = <20>;
+ ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+ <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+ <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+ <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+ <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+ <3574170 0>;
+ };
+};
+
+&builtin_gamepad {
+ button-sw19 {
+ gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+ label = "SELECT";
+ linux,code = <BTN_SELECT>;
+ };
+ /* note that TR2 and TL2 are swapped */
+ button-sw20 {
+ gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "TOP-RIGHT 2";
+ linux,code = <BTN_TR2>;
+ };
+ button-sw21 {
+ gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+ label = "TOP-LEFT 2";
+ linux,code = <BTN_TL2>;
+ };
+ button-sw22 {
+ gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "START";
+ linux,code = <BTN_START>;
+ };
+};
+
+&internal_display {
+ status = "disabled";
+};
+
+&rk817_charger {
+ monitored-battery = <&battery>;
+};
+
+&pinctrl {
+ btns {
+ btn_pins: btn-pins {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+ joystick {
+ mux_en_pins: mux-pins {
+ rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+ };
+};
--
2.38.1
^ permalink raw reply related [flat|nested] 5+ messages in thread