From: Herve Codina <herve.codina@bootlin.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Herve Codina <herve.codina@bootlin.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Magnus Damm <magnus.damm@gmail.com>,
Gareth Williams <gareth.williams.jx@renesas.com>
Cc: linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH v2 1/7] soc: renesas: r9a06g032-sysctrl: Export function to get the usb role
Date: Mon, 14 Nov 2022 12:15:07 +0100 [thread overview]
Message-ID: <20221114111513.1436165-2-herve.codina@bootlin.com> (raw)
In-Reply-To: <20221114111513.1436165-1-herve.codina@bootlin.com>
The usb role retrieved is determined from the CFG_USB[H2MODE]
value. The CFG_USB register is located within the system
controller.
We need a helper to get the usb role based on H2MODE value from
the CFG_USB register without syscon.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
drivers/clk/renesas/r9a06g032-clocks.c | 18 ++++++++++++++++++
include/linux/soc/renesas/r9a06g032-sysctrl.h | 2 ++
2 files changed, 20 insertions(+)
diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c
index 1488c9d6e639..9ee056498714 100644
--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
@@ -23,8 +23,11 @@
#include <linux/slab.h>
#include <linux/soc/renesas/r9a06g032-sysctrl.h>
#include <linux/spinlock.h>
+#include <linux/usb/role.h>
#include <dt-bindings/clock/r9a06g032-sysctrl.h>
+#define R9A06G032_SYSCTRL_USB 0x00
+#define R9A06G032_SYSCTRL_USB_H2MODE (1<<1)
#define R9A06G032_SYSCTRL_DMAMUX 0xA0
struct r9a06g032_gate {
@@ -341,6 +344,21 @@ int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val)
}
EXPORT_SYMBOL_GPL(r9a06g032_sysctrl_set_dmamux);
+
+/* Exported helper to get the H2MODE bit from USB register */
+int r9a06g032_sysctrl_get_usb_role(void)
+{
+ u32 usb;
+
+ if (!sysctrl_priv)
+ return -EPROBE_DEFER;
+
+ usb = readl(sysctrl_priv->reg + R9A06G032_SYSCTRL_USB);
+ return (usb & R9A06G032_SYSCTRL_USB_H2MODE) ?
+ USB_ROLE_HOST : USB_ROLE_DEVICE;
+}
+EXPORT_SYMBOL_GPL(r9a06g032_sysctrl_get_usb_role);
+
/* register/bit pairs are encoded as an uint16_t */
static void
clk_rdesc_set(struct r9a06g032_priv *clocks,
diff --git a/include/linux/soc/renesas/r9a06g032-sysctrl.h b/include/linux/soc/renesas/r9a06g032-sysctrl.h
index 066dfb15cbdd..fc18d013a498 100644
--- a/include/linux/soc/renesas/r9a06g032-sysctrl.h
+++ b/include/linux/soc/renesas/r9a06g032-sysctrl.h
@@ -4,8 +4,10 @@
#ifdef CONFIG_CLK_R9A06G032
int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val);
+int r9a06g032_sysctrl_get_usb_role(void);
#else
static inline int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val) { return -ENODEV; }
+static inline int r9a06g032_sysctrl_get_usb_role(void) { return -ENODEV; }
#endif
#endif /* __LINUX_SOC_RENESAS_R9A06G032_SYSCTRL_H__ */
--
2.38.1
next prev parent reply other threads:[~2022-11-14 11:18 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-14 11:15 [PATCH v2 0/7] Add the Renesas USBF controller support Herve Codina
2022-11-14 11:15 ` Herve Codina [this message]
2022-11-14 13:33 ` [PATCH v2 1/7] soc: renesas: r9a06g032-sysctrl: Export function to get the usb role Geert Uytterhoeven
2022-11-14 11:15 ` [PATCH v2 2/7] dt-bindings: clock: renesas,r9a06g032-sysctrl: Add h2mode property Herve Codina
2022-11-14 13:33 ` Geert Uytterhoeven
2022-11-15 13:05 ` Krzysztof Kozlowski
2022-11-15 13:07 ` Krzysztof Kozlowski
2022-11-15 14:04 ` Herve Codina
2022-11-18 10:23 ` Herve Codina
2022-11-21 11:43 ` Krzysztof Kozlowski
2022-11-21 15:59 ` Herve Codina
2022-11-21 16:33 ` Krzysztof Kozlowski
2022-11-21 16:36 ` Geert Uytterhoeven
2022-11-21 17:11 ` Krzysztof Kozlowski
2022-11-21 20:46 ` Geert Uytterhoeven
2022-11-22 7:45 ` Krzysztof Kozlowski
2022-11-22 8:25 ` Geert Uytterhoeven
2022-11-22 8:42 ` Krzysztof Kozlowski
2022-11-22 9:01 ` Geert Uytterhoeven
2022-11-22 10:23 ` Krzysztof Kozlowski
2022-11-22 10:26 ` Geert Uytterhoeven
2022-11-22 10:34 ` Krzysztof Kozlowski
2022-11-22 9:07 ` Herve Codina
2022-11-22 10:30 ` Krzysztof Kozlowski
2022-11-22 10:47 ` Geert Uytterhoeven
2022-11-23 9:39 ` Krzysztof Kozlowski
2022-11-24 9:36 ` Miquel Raynal
2022-11-24 9:46 ` Krzysztof Kozlowski
2022-11-24 10:27 ` Miquel Raynal
2022-11-24 10:44 ` Miquel Raynal
2022-11-14 11:15 ` [PATCH v2 3/7] soc: renesas: r9a06g032-sysctrl: Handle h2mode device-tree property Herve Codina
2022-11-14 13:32 ` Geert Uytterhoeven
2022-11-14 11:15 ` [PATCH v2 4/7] dt-bindings: usb: add the Renesas RZ/N1 USBF controller binding Herve Codina
2022-11-15 13:13 ` Krzysztof Kozlowski
2022-11-15 13:29 ` Herve Codina
2022-11-14 11:15 ` [PATCH v2 5/7] usb: gadget: udc: add Renesas RZ/N1 USBF controller support Herve Codina
2022-11-14 11:15 ` [PATCH v2 6/7] ARM: dts: r9a06g032: Add the USBF controller node Herve Codina
2022-11-15 13:16 ` Krzysztof Kozlowski
2022-11-15 13:27 ` Herve Codina
2022-11-15 15:09 ` Herve Codina
2022-11-15 16:30 ` Krzysztof Kozlowski
2022-11-15 14:11 ` Geert Uytterhoeven
2022-11-15 14:58 ` Krzysztof Kozlowski
2022-11-16 8:51 ` Geert Uytterhoeven
2022-11-14 11:15 ` [PATCH v2 7/7] MAINTAINERS: add the Renesas RZ/N1 USBF controller entry Herve Codina
2022-11-15 12:20 ` kernel test robot
2022-11-15 13:24 ` Herve Codina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221114111513.1436165-2-herve.codina@bootlin.com \
--to=herve.codina@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=gareth.williams.jx@renesas.com \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).