From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 19A4CC4332F for ; Mon, 14 Nov 2022 17:21:25 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236791AbiKNRUz (ORCPT ); Mon, 14 Nov 2022 12:20:55 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56396 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237965AbiKNRUg (ORCPT ); Mon, 14 Nov 2022 12:20:36 -0500 Received: from relay02.th.seeweb.it (relay02.th.seeweb.it [IPv6:2001:4b7a:2000:18::163]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9F78A1C42F for ; Mon, 14 Nov 2022 09:20:35 -0800 (PST) Received: from TimeMachine.lan (bband-dyn193.178-41-216.t-com.sk [178.41.216.193]) by m-r1.th.seeweb.it (Postfix) with ESMTPA id CA7681F68A; Mon, 14 Nov 2022 18:20:33 +0100 (CET) From: Martin Botka To: martin.botka1@gmail.com Cc: ~postmarketos/upstreaming@lists.sr.ht, Konrad Dybcio , AngeloGioacchino Del Regno , Marijn Suijten , Jami Kettunen , Paul Bouchara , Yenda , Martin Botka , Rob Herring , Krzysztof Kozlowski , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Andre Przywara , Maxime Ripard , Andrew Lunn , Conley Lee , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org Subject: [PATCH V2 2/2] arm64: dts: Add basic support for BIQU CB1 Date: Mon, 14 Nov 2022 18:20:16 +0100 Message-Id: <20221114172018.1876608-2-martin.botka@somainline.org> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221114172018.1876608-1-martin.botka@somainline.org> References: <20221114172018.1876608-1-martin.botka@somainline.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org CB1 is Compute Module style board that plugs into Rpi board style adapter or Manta 3D printer boards (M4P/M8P). The board has: H616 SoC 1GB of RAM AXP313A PMIC And the actual boards that CB1 plugs in are just extension to it with ports and thus are not split in DT. Boards have: 4x (3x for Manta boards) USB and 1 USB OTG. SDcard slot for loading images. Ethernet port wired to the internal PHY. 2x HDMI 2.0. Power and Status LEDs. Currently working: Booting USB UART Signed-off-by: Martin Botka --- Changes in V2: Add proper board compatible Add regulator prefix for vcc5v Drop okay status from PMIC Drop standby_param arch/arm64/boot/dts/allwinner/Makefile | 1 + .../dts/allwinner/sun50i-h616-biqu-cb1.dts | 186 ++++++++++++++++++ 2 files changed, 187 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-biqu-cb1.dts diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 6a96494a2e0a..223f1be73541 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -38,5 +38,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-biqu-cb1.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-biqu-cb1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-biqu-cb1.dts new file mode 100644 index 000000000000..297536d7629a --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-biqu-cb1.dts @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2022 Arm Ltd. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include +#include +#include + +/ { + model = "BIQU CB1"; + compatible = "biqu,cb1", "allwinner,sun50i-h616"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ + default-state = "on"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */ + }; + }; + + reg_vcc5v: regulator_vcc5v { + /* board wide 5V supply directly from the USB-C socket */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_vcc5v>; + enable-active-high; + gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_dldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + no-1-8-v; + bus-width = <4>; + status = "disabled"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&r_i2c { + status = "okay"; + + axp1530: pmic@36 { + compatible = "x-powers,axp1530"; + reg = <0x36>; + wakeup-source; + + regulators{ + reg_dcdc1: dcdc1 { + regulator-name = "axp1530-dcdc1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-step-delay-us = <25>; + regulator-final-delay-us = <50>; + regulator-always-on; + }; + + reg_dcdc2: dcdc2 { + regulator-name = "axp1530-dcdc2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1540000>; + regulator-step-delay-us = <25>; + regulator-final-delay-us = <50>; + regulator-ramp-delay = <200>; + regulator-always-on; + }; + + reg_dcdc3: dcdc3 { + regulator-name = "axp1530-dcdc3"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1840000>; + regulator-step-delay-us = <25>; + regulator-final-delay-us = <50>; + regulator-always-on; + }; + + reg_aldo1: ldo1 { + regulator-name = "axp1530-aldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-step-delay-us = <25>; + regulator-final-delay-us = <50>; + regulator-always-on; + }; + + reg_dldo1: ldo2 { + regulator-name = "axp1530-dldo1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-step-delay-us = <25>; + regulator-final-delay-us = <50>; + regulator-always-on; + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usbotg { + /* + * PHY0 pins are connected to a USB-C socket, but a role switch + * is not implemented: both CC pins are pulled to GND. + * The VBUS pins power the device, so a fixed peripheral mode + * is the best choice. + * The board can be powered via GPIOs, in this case port0 *can* + * act as a host (with a cable/adapter ignoring CC), as VBUS is + * then provided by the GPIOs. Any user of this setup would + * need to adjust the DT accordingly: dr_mode set to "host", + * enabling OHCI0 and EHCI0. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; -- 2.38.1