From: Johan Hovold <johan+linaro@kernel.org>
To: Mark Brown <broonie@kernel.org>, Bjorn Andersson <andersson@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Douglas Anderson <dianders@chromium.org>,
Parikshit Pareek <quic_ppareek@quicinc.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH 2/2] arm64: dts: qcom: clean up 'regulator-allowed-modes' indentation
Date: Wed, 16 Nov 2022 11:20:54 +0100 [thread overview]
Message-ID: <20221116102054.4673-3-johan+linaro@kernel.org> (raw)
In-Reply-To: <20221116102054.4673-1-johan+linaro@kernel.org>
When recently adding the missing 'regulator-allowed-modes' properties it
appears that the binding example with its four-spaces indentation
(corresponding to a single tab, which is still to little) was copied
verbatim.
Drop the unnecessary first line break after 'regulator-allowed-modes'
properties and indent the single remaining continuation line properly.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 20 ++++++++-----------
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 20 ++++++++-----------
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 10 ++++------
.../qcom/sm6350-sony-xperia-lena-pdx213.dts | 10 ++++------
.../boot/dts/qcom/sm7225-fairphone-fp4.dts | 10 ++++------
.../dts/qcom/sm8150-sony-xperia-kumano.dtsi | 10 ++++------
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 10 ++++------
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 20 ++++++++-----------
8 files changed, 44 insertions(+), 66 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 01ac460d910e..952acfc04adc 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -136,9 +136,8 @@ vreg_l5a_0p88: ldo5 {
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a_1p8: ldo7 {
@@ -154,9 +153,8 @@ vreg_l10a_2p96: ldo10 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a_0p8: ldo11 {
@@ -263,9 +261,8 @@ vreg_l5c_1p2: ldo5 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_1p8: ldo7 {
@@ -281,9 +278,8 @@ vreg_l8c_1p2: ldo8 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 6c29d7d757e0..51805106f542 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -90,9 +90,8 @@ vreg_l3c: ldo3 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c: ldo4 {
@@ -108,9 +107,8 @@ vreg_l6c: ldo6 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c: ldo7 {
@@ -126,9 +124,8 @@ vreg_l10c: ldo10 {
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17c: ldo17 {
@@ -137,9 +134,8 @@ vreg_l17c: ldo17 {
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index f09810e3d956..551768f97729 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -170,9 +170,8 @@ vreg_l7c: ldo7 {
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13c: ldo13 {
@@ -195,9 +194,8 @@ vreg_l3d: ldo3 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4d: ldo4 {
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 20f35623d1ef..94f77d376662 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -231,9 +231,8 @@ pm6150l_l6: ldo6 {
regulator-max-microvolt = <2950000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
@@ -254,9 +253,8 @@ pm6150l_l9: ldo9 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index 1cb14051ab1b..c456e9594ea5 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -282,9 +282,8 @@ vreg_l6e: ldo6 {
regulator-max-microvolt = <2950000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7e: ldo7 {
@@ -304,9 +303,8 @@ vreg_l9e: ldo9 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10e: ldo10 {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index fb6e5a140c9f..c958a8b16730 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -348,9 +348,8 @@ vreg_l6c_2p9: ldo6 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_3p0: ldo7 {
@@ -370,9 +369,8 @@ vreg_l9c_2p9: ldo9 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 2a223ed50102..38746f248969 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -317,9 +317,8 @@ vreg_l6c_2p9: ldo6 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_2p85: ldo7 {
@@ -342,9 +341,8 @@ vreg_l9c_2p9: ldo9 {
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 69ae6503c2f6..26a608144886 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -107,9 +107,8 @@ vreg_l5b_0p88: ldo5 {
regulator-max-microvolt = <888000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b_1p2: ldo6 {
@@ -118,9 +117,8 @@ vreg_l6b_1p2: ldo6 {
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b_2p96: ldo7 {
@@ -129,9 +127,8 @@ vreg_l7b_2p96: ldo7 {
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9b_1p2: ldo9 {
@@ -140,9 +137,8 @@ vreg_l9b_1p2: ldo9 {
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
- regulator-allowed-modes =
- <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
};
--
2.37.4
next prev parent reply other threads:[~2022-11-16 10:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-16 10:20 [PATCH 0/2] arm64: dts: qcom: clean up 'regulator-allowed-modes' indentation Johan Hovold
2022-11-16 10:20 ` [PATCH 1/2] regulator: dt-bindings: qcom,rpmh: clean up example indentation Johan Hovold
2022-11-16 12:38 ` Krzysztof Kozlowski
2022-11-16 10:20 ` Johan Hovold [this message]
2022-11-16 10:43 ` [PATCH 2/2] arm64: dts: qcom: clean up 'regulator-allowed-modes' indentation Konrad Dybcio
2022-11-16 15:01 ` (subset) [PATCH 0/2] " Mark Brown
2022-12-06 18:18 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221116102054.4673-3-johan+linaro@kernel.org \
--to=johan+linaro@kernel.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_ppareek@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).