From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Conor Dooley <conor.dooley@microchip.com>,
Palmer Dabbelt <palmer@rivosinc.com>,
Sasha Levin <sashal@kernel.org>,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
palmer@dabbelt.com, paul.walmsley@sifive.com,
aou@eecs.berkeley.edu, bin.meng@windriver.com,
devicetree@vger.kernel.org, linux-riscv@lists.infradead.org
Subject: [PATCH AUTOSEL 6.0 05/44] riscv: dts: sifive unleashed: Add PWM controlled LEDs
Date: Fri, 18 Nov 2022 21:10:45 -0500 [thread overview]
Message-ID: <20221119021124.1773699-5-sashal@kernel.org> (raw)
In-Reply-To: <20221119021124.1773699-1-sashal@kernel.org>
From: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[ Upstream commit 8bc8824d30193eb7755043d5bb65fa7f0d11a595 ]
This adds the 4 PWM controlled green LEDs to the HiFive Unleashed device
tree. The schematic doesn't specify any special function for the LEDs,
so they're added here without any default triggers and named d1, d2, d3
and d4 just like in the schematic.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221012110928.352910-1-emil.renner.berthing@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../boot/dts/sifive/hifive-unleashed-a00.dts | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
index ced0d4e47938..900a50526d77 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
@@ -3,6 +3,8 @@
#include "fu540-c000.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
#define RTCCLK_FREQ 1000000
@@ -42,6 +44,42 @@ gpio-restart {
compatible = "gpio-restart";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
+
+ led-controller {
+ compatible = "pwm-leds";
+
+ led-d1 {
+ pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
+ active-low;
+ color = <LED_COLOR_ID_GREEN>;
+ max-brightness = <255>;
+ label = "d1";
+ };
+
+ led-d2 {
+ pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
+ active-low;
+ color = <LED_COLOR_ID_GREEN>;
+ max-brightness = <255>;
+ label = "d2";
+ };
+
+ led-d3 {
+ pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
+ active-low;
+ color = <LED_COLOR_ID_GREEN>;
+ max-brightness = <255>;
+ label = "d3";
+ };
+
+ led-d4 {
+ pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
+ active-low;
+ color = <LED_COLOR_ID_GREEN>;
+ max-brightness = <255>;
+ label = "d4";
+ };
+ };
};
&uart0 {
--
2.35.1
parent reply other threads:[~2022-11-19 2:12 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <20221119021124.1773699-1-sashal@kernel.org>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221119021124.1773699-5-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=bin.meng@windriver.com \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=palmer@rivosinc.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).