From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>,
devicetree@vger.kernel.org,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>
Subject: [PATCH v3 1/1] ARM: dts: Unify pwm-omap-dmtimer node names
Date: Mon, 21 Nov 2022 15:08:38 +0200 [thread overview]
Message-ID: <20221121130838.37707-1-tony@atomide.com> (raw)
There is no reg property for pwm-omap-dmtimer.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
Changes since v2:
- Go back to decimal node numbering, only addresses are in hex format
as noted by Krzysztof in the pwm binding thread
Changes since v1:
Changes since v1:
- Use hex instead of dec for pwm10 and 11
- Add missing #pwm-cells for am335x-guardian
---
arch/arm/boot/dts/am335x-guardian.dts | 3 ++-
arch/arm/boot/dts/am3517-evm.dts | 2 +-
arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 2 +-
arch/arm/boot/dts/motorola-mapphone-common.dtsi | 4 ++--
arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
arch/arm/boot/dts/omap3-n900.dts | 2 +-
6 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -103,8 +103,9 @@ panel-info {
};
- guardian_beeper: dmtimer-pwm@7 {
+ guardian_beeper: pwm-7 {
compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
ti,timers = <&timer7>;
pinctrl-names = "default";
pinctrl-0 = <&guardian_beeper_pins>;
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -150,7 +150,7 @@ bl: backlight {
enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
};
- pwm11: dmtimer-pwm@11 {
+ pwm11: pwm-11 {
compatible = "ti,omap-dmtimer-pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm_pins>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -59,7 +59,7 @@ led2 {
};
};
- pwm10: dmtimer-pwm {
+ pwm10: pwm-10 {
compatible = "ti,omap-dmtimer-pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm_pins>;
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -133,7 +133,7 @@ soundcard {
dais = <&mcbsp2_port>, <&mcbsp3_port>;
};
- pwm8: dmtimer-pwm-8 {
+ pwm8: pwm-8 {
pinctrl-names = "default";
pinctrl-0 = <&vibrator_direction_pin>;
@@ -143,7 +143,7 @@ pwm8: dmtimer-pwm-8 {
ti,clock-source = <0x01>;
};
- pwm9: dmtimer-pwm-9 {
+ pwm9: pwm-9 {
pinctrl-names = "default";
pinctrl-0 = <&vibrator_enable_pin>;
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -147,7 +147,7 @@ backlight: backlight {
pinctrl-0 = <&backlight_pins>;
};
- pwm11: dmtimer-pwm {
+ pwm11: pwm-11 {
compatible = "ti,omap-dmtimer-pwm";
ti,timers = <&timer11>;
#pwm-cells = <3>;
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -156,7 +156,7 @@ battery: n900-battery {
io-channel-names = "temp", "bsi", "vbat";
};
- pwm9: dmtimer-pwm {
+ pwm9: pwm-9 {
compatible = "ti,omap-dmtimer-pwm";
#pwm-cells = <3>;
ti,timers = <&timer9>;
--
2.38.1
reply other threads:[~2022-11-21 13:08 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221121130838.37707-1-tony@atomide.com \
--to=tony@atomide.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-omap@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).