[PATCH v4 06/11] drm/msm/dsi/phy: rework register setting for 7nm PHY

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

In preparation to adding the sm8350 and sm8450 PHYs support, rearrange
register values calculations in dsi_7nm_phy_enable(). This change bears
no functional changes itself, it is merely a preparation for the next
patch.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 26 +++++++++++------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 9e7fa7d88ead..0b780f9d3d0a 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -858,23 +858,34 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 	/* Alter PHY configurations if data rate less than 1.5GHZ*/
 	less_than_1500_mhz = (clk_req->bitclk_rate <= 1500000000);
 
+	if (phy->cphy_mode) {
+		vreg_ctrl_0 = 0x51;
+		vreg_ctrl_1 = 0x55;
+		glbl_pemph_ctrl_0 = 0x11;
+		lane_ctrl0 = 0x17;
+	} else {
+		vreg_ctrl_1 = 0x5c;
+		glbl_pemph_ctrl_0 = 0x00;
+		lane_ctrl0 = 0x1f;
+	}
+
 	if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
-		vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
 		if (phy->cphy_mode) {
 			glbl_rescode_top_ctrl = 0x00;
 			glbl_rescode_bot_ctrl = 0x3c;
 		} else {
+			vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
 			glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d :  0x00;
 			glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x39 :  0x3c;
 		}
 		glbl_str_swi_cal_sel_ctrl = 0x00;
 		glbl_hstx_str_ctrl_0 = 0x88;
 	} else {
-		vreg_ctrl_0 = less_than_1500_mhz ? 0x5B : 0x59;
 		if (phy->cphy_mode) {
 			glbl_str_swi_cal_sel_ctrl = 0x03;
 			glbl_hstx_str_ctrl_0 = 0x66;
 		} else {
+			vreg_ctrl_0 = less_than_1500_mhz ? 0x5B : 0x59;
 			glbl_str_swi_cal_sel_ctrl = less_than_1500_mhz ? 0x03 : 0x00;
 			glbl_hstx_str_ctrl_0 = less_than_1500_mhz ? 0x66 : 0x88;
 		}
@@ -882,17 +893,6 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 		glbl_rescode_bot_ctrl = 0x3c;
 	}
 
-	if (phy->cphy_mode) {
-		vreg_ctrl_0 = 0x51;
-		vreg_ctrl_1 = 0x55;
-		glbl_pemph_ctrl_0 = 0x11;
-		lane_ctrl0 = 0x17;
-	} else {
-		vreg_ctrl_1 = 0x5c;
-		glbl_pemph_ctrl_0 = 0x00;
-		lane_ctrl0 = 0x1f;
-	}
-
 	/* de-assert digital and pll power down */
 	data = BIT(6) | BIT(5);
 	dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_CTRL_0, data);
-- 
2.35.1