Re: [PATCH v3 1/2] dt-bindings: pwm: Allow decimal format in addition to hex format

[Rob Herring <robh@kernel.org>]

On Tue, Nov 22, 2022 at 03:41:58PM +0200, Tony Lindgren wrote:
> * Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [221122 13:28]:
> > On Tue, Nov 22, 2022 at 02:32:24PM +0200, Tony Lindgren wrote:
> > > Let's allow node numbering in decimal format too.
> > > 
> > > Simple human-readable increments/IDs are usually decimal, hex is only for
> > > addresses as noted by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>.
> > > 
> > > Let's use an improved match suggested by Krzysztof Kozlowski
> > > <krzysztof.kozlowski@linaro.org> and improved a bit by Uwe Kleine-König
> > > <u.kleine-koenig@pengutronix.de>.
> > > 
> > > Cc: linux-pwm@vger.kernel.org
> > > Cc: Thierry Reding <thierry.reding@gmail.com>
> > > Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > > Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> > > Signed-off-by: Tony Lindgren <tony@atomide.com>
> > 
> > Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> > 
> > Which tree should this merged through? The obvious candidates are pwm,
> > dt and omap.
> 
> The dt folks usually queue the binding patches separately.

The default is they go thru the subsystem trees, and I mainly pickup 
what has not after some time (and is standalone binding change).

Rob