devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v6 0/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree
@ 2022-11-23  3:37 Lin, Meng-Bo
  2022-11-23  3:38 ` [PATCH v6 1/4] dt-bindings: qcom: Document msm8916-acer-a1-724 Lin, Meng-Bo
                   ` (4 more replies)
  0 siblings, 5 replies; 7+ messages in thread
From: Lin, Meng-Bo @ 2022-11-23  3:37 UTC (permalink / raw)
  To: linux-kernel
  Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
	Krzysztof Kozlowski, Stephan Gerhold, Nikita Travkin, devicetree,
	linux-arm-msm, ~postmarketos/upstreaming

v6: Fix incorrect commit message and newlines in touchscreen.
resend: Fix incorrect in-reply-to
v5: Add touchscreen.
v4: Sort properties in l11.
v3: Set property status = "okay"; as the last property.
Reword the bindings patch.
v2: Fix a typo in dt-bindings commit message

Acer Iconia Talk S A1-724 is a tablet using the MSM8916 SoC released
in 2014.

Note: The original firmware from Acer can only boot 32-bit kernels.
To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware
with EDL, e.g. taken from the DragonBoard 410c. This works because Acer
didn't set up (firmware) secure boot.

Add a device tree for with initial support for:

- GPIO keys
- pm8916-vibrator
- SDHCI (internal and external storage)
- USB Device Mode
- UART
- WCNSS (WiFi/BT)
- Regulators
- Bosch BMC150 accelerometer/magnetometer
- Focaltech FT5446 touchscreen


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v6 1/4] dt-bindings: qcom: Document msm8916-acer-a1-724
  2022-11-23  3:37 [PATCH v6 0/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree Lin, Meng-Bo
@ 2022-11-23  3:38 ` Lin, Meng-Bo
  2022-11-23  3:39 ` [PATCH v6 2/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree Lin, Meng-Bo
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 7+ messages in thread
From: Lin, Meng-Bo @ 2022-11-23  3:38 UTC (permalink / raw)
  To: linux-kernel
  Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
	Krzysztof Kozlowski, Stephan Gerhold, Nikita Travkin, devicetree,
	linux-arm-msm, ~postmarketos/upstreaming, Krzysztof Kozlowski

Document the new acer,a1-724 device tree bindings used in its device tree.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 463509f0f23a..83f6748979a9 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -180,6 +180,7 @@ properties:
 
       - items:
           - enum:
+              - acer,a1-724
               - alcatel,idol347
               - asus,z00l
               - huawei,g7
-- 
2.30.2



^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v6 2/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree
  2022-11-23  3:37 [PATCH v6 0/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree Lin, Meng-Bo
  2022-11-23  3:38 ` [PATCH v6 1/4] dt-bindings: qcom: Document msm8916-acer-a1-724 Lin, Meng-Bo
@ 2022-11-23  3:39 ` Lin, Meng-Bo
  2022-11-23  3:39 ` [PATCH v6 3/4] arm64: dts: qcom: msm8916-acer-a1-724: Add accelerometer/magnetometer Lin, Meng-Bo
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 7+ messages in thread
From: Lin, Meng-Bo @ 2022-11-23  3:39 UTC (permalink / raw)
  To: linux-kernel
  Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
	Krzysztof Kozlowski, Stephan Gerhold, Nikita Travkin, devicetree,
	linux-arm-msm, ~postmarketos/upstreaming

Acer Iconia Talk S A1-724 is a tablet using the MSM8916 SoC released
in 2014.

Note: The original firmware from Acer can only boot 32-bit kernels.
To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware
with EDL, e.g. taken from the DragonBoard 410c. This works because Acer
didn't set up (firmware) secure boot.

Add a device tree for with initial support for:

- GPIO keys
- pm8916-vibrator
- SDHCI (internal and external storage)
- USB Device Mode
- UART
- WCNSS (WiFi/BT)
- Regulators

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/msm8916-acer-a1-724.dts     | 217 ++++++++++++++++++
 2 files changed, 218 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index afe496a93f94..f38a20074013 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-asus-z00l.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-huawei-g7.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
new file mode 100644
index 000000000000..593051ea92b6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/*
+ * NOTE: The original firmware from Acer can only boot 32-bit kernels.
+ * To boot this device tree using arm64 it is necessary to flash 64-bit
+ * TZ/HYP firmware (e.g. taken from the DragonBoard 410c).
+ * See https://wiki.postmarketos.org/wiki/Acer_Iconia_Talk_S_(acer-a1-724)
+ * for suggested installation instructions.
+ */
+
+/ {
+	model = "Acer Iconia Talk S A1-724";
+	compatible = "acer,a1-724", "qcom,msm8916";
+	chassis-type = "tablet";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&pronto {
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&smd_rpm_regulators {
+	vdd_l1_l2_l3-supply = <&pm8916_s3>;
+	vdd_l4_l5_l6-supply = <&pm8916_s4>;
+	vdd_l7-supply = <&pm8916_s4>;
+
+	s3 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1300000>;
+	};
+
+	s4 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2100000>;
+	};
+
+	l1 {
+		regulator-min-microvolt = <1225000>;
+		regulator-max-microvolt = <1225000>;
+	};
+
+	l2 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	l4 {
+		regulator-min-microvolt = <2050000>;
+		regulator-max-microvolt = <2050000>;
+	};
+
+	l5 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l6 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l7 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l8 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	l9 {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l10 {
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	l11 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+		regulator-system-load = <200000>;
+		regulator-allow-set-load;
+	};
+
+	l12 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+	};
+
+	l13 {
+		regulator-min-microvolt = <3075000>;
+		regulator-max-microvolt = <3075000>;
+	};
+
+	l14 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l15 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l16 {
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+
+	l18 {
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+	};
+};
+
+&msmgpio {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
-- 
2.30.2



^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v6 3/4] arm64: dts: qcom: msm8916-acer-a1-724: Add accelerometer/magnetometer
  2022-11-23  3:37 [PATCH v6 0/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree Lin, Meng-Bo
  2022-11-23  3:38 ` [PATCH v6 1/4] dt-bindings: qcom: Document msm8916-acer-a1-724 Lin, Meng-Bo
  2022-11-23  3:39 ` [PATCH v6 2/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree Lin, Meng-Bo
@ 2022-11-23  3:39 ` Lin, Meng-Bo
  2022-11-23  3:39 ` [PATCH v6 4/4] arm64: dts: qcom: msm8916-acer-a1-724: Add touchscreen Lin, Meng-Bo
  2022-12-28  4:36 ` (subset) [PATCH v6 0/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree Bjorn Andersson
  4 siblings, 0 replies; 7+ messages in thread
From: Lin, Meng-Bo @ 2022-11-23  3:39 UTC (permalink / raw)
  To: linux-kernel
  Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
	Krzysztof Kozlowski, Stephan Gerhold, Nikita Travkin, devicetree,
	linux-arm-msm, ~postmarketos/upstreaming

Iconia Talk S uses a Bosch BMC150 accelerometer/magnetometer combo.
The chip provides two separate I2C devices for the accelerometer
and magnetometer that are already supported by the bmc150-accel
and bmc150-magn driver.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 .../boot/dts/qcom/msm8916-acer-a1-724.dts     | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
index 593051ea92b6..bea0d022dd9a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -6,6 +6,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 /*
  * NOTE: The original firmware from Acer can only boot 32-bit kernels.
@@ -51,6 +52,35 @@ usb_id: usb-id {
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default>;
+
+		mount-matrix = "0", "-1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "1";
+	};
+
+	magnetometer@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+	};
+};
+
 &blsp1_uart2 {
 	status = "okay";
 };
@@ -199,6 +229,14 @@ l18 {
 };
 
 &msmgpio {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
-- 
2.30.2



^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v6 4/4] arm64: dts: qcom: msm8916-acer-a1-724: Add touchscreen
  2022-11-23  3:37 [PATCH v6 0/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree Lin, Meng-Bo
                   ` (2 preceding siblings ...)
  2022-11-23  3:39 ` [PATCH v6 3/4] arm64: dts: qcom: msm8916-acer-a1-724: Add accelerometer/magnetometer Lin, Meng-Bo
@ 2022-11-23  3:39 ` Lin, Meng-Bo
  2022-11-23 11:28   ` Konrad Dybcio
  2022-12-28  4:36 ` (subset) [PATCH v6 0/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree Bjorn Andersson
  4 siblings, 1 reply; 7+ messages in thread
From: Lin, Meng-Bo @ 2022-11-23  3:39 UTC (permalink / raw)
  To: linux-kernel
  Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
	Krzysztof Kozlowski, Stephan Gerhold, Nikita Travkin, devicetree,
	linux-arm-msm, ~postmarketos/upstreaming

A1-724 uses a Focaltech FT5446 touchscreen that is connected to blsp_i2c5.
Add it to the device tree.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
---
 .../boot/dts/qcom/msm8916-acer-a1-724.dts     | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
index bea0d022dd9a..ed3fa7b3575b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -81,6 +81,30 @@ magnetometer@12 {
 	};
 };
 
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		/* Actually ft5446 */
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+
+		interrupt-parent = <&msmgpio>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8916_l16>;
+		iovcc-supply = <&pm8916_l6>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_default>;
+	};
+};
+
 &blsp1_uart2 {
 	status = "okay";
 };
@@ -245,6 +269,22 @@ gpio_keys_default: gpio-keys-default-state {
 		bias-pull-up;
 	};
 
+	touchscreen_default: touchscreen-default-state {
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";
-- 
2.30.2



^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH v6 4/4] arm64: dts: qcom: msm8916-acer-a1-724: Add touchscreen
  2022-11-23  3:39 ` [PATCH v6 4/4] arm64: dts: qcom: msm8916-acer-a1-724: Add touchscreen Lin, Meng-Bo
@ 2022-11-23 11:28   ` Konrad Dybcio
  0 siblings, 0 replies; 7+ messages in thread
From: Konrad Dybcio @ 2022-11-23 11:28 UTC (permalink / raw)
  To: Lin, Meng-Bo, linux-kernel
  Cc: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski,
	Stephan Gerhold, Nikita Travkin, devicetree, linux-arm-msm,
	~postmarketos/upstreaming



On 23.11.2022 04:39, Lin, Meng-Bo wrote:
> A1-724 uses a Focaltech FT5446 touchscreen that is connected to blsp_i2c5.
> Add it to the device tree.
> 
> Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  .../boot/dts/qcom/msm8916-acer-a1-724.dts     | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
> index bea0d022dd9a..ed3fa7b3575b 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
> @@ -81,6 +81,30 @@ magnetometer@12 {
>  	};
>  };
>  
> +&blsp_i2c5 {
> +	status = "okay";
> +
> +	touchscreen@38 {
> +		/* Actually ft5446 */
> +		compatible = "edt,edt-ft5406";
> +		reg = <0x38>;
> +
> +		interrupt-parent = <&msmgpio>;
> +		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
> +
> +		reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>;
> +
> +		vcc-supply = <&pm8916_l16>;
> +		iovcc-supply = <&pm8916_l6>;
> +
> +		touchscreen-size-x = <720>;
> +		touchscreen-size-y = <1280>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&touchscreen_default>;
> +	};
> +};
> +
>  &blsp1_uart2 {
>  	status = "okay";
>  };
> @@ -245,6 +269,22 @@ gpio_keys_default: gpio-keys-default-state {
>  		bias-pull-up;
>  	};
>  
> +	touchscreen_default: touchscreen-default-state {
> +		reset-pins {
> +			pins = "gpio12";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-disable;
> +		};
> +
> +		touchscreen-pins {
> +			pins = "gpio13";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +	};
> +
>  	usb_id_default: usb-id-default-state {
>  		pins = "gpio110";
>  		function = "gpio";

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: (subset) [PATCH v6 0/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree
  2022-11-23  3:37 [PATCH v6 0/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree Lin, Meng-Bo
                   ` (3 preceding siblings ...)
  2022-11-23  3:39 ` [PATCH v6 4/4] arm64: dts: qcom: msm8916-acer-a1-724: Add touchscreen Lin, Meng-Bo
@ 2022-12-28  4:36 ` Bjorn Andersson
  4 siblings, 0 replies; 7+ messages in thread
From: Bjorn Andersson @ 2022-12-28  4:36 UTC (permalink / raw)
  To: linux-kernel, linmengbo0689
  Cc: ~postmarketos/upstreaming, krzysztof.kozlowski+dt, nikita,
	konrad.dybcio, robh+dt, devicetree, agross, stephan,
	linux-arm-msm

On Wed, 23 Nov 2022 03:37:15 +0000, Lin, Meng-Bo wrote:
> v6: Fix incorrect commit message and newlines in touchscreen.
> resend: Fix incorrect in-reply-to
> v5: Add touchscreen.
> v4: Sort properties in l11.
> v3: Set property status = "okay"; as the last property.
> Reword the bindings patch.
> v2: Fix a typo in dt-bindings commit message
> 
> [...]

Applied, thanks!

[1/4] dt-bindings: qcom: Document msm8916-acer-a1-724
      commit: 17c073500e9060281a115e34b00424d486be9450
[2/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree
      commit: 0fbf49b3eac98495c1c75ea16019e5613cda109b
[3/4] arm64: dts: qcom: msm8916-acer-a1-724: Add accelerometer/magnetometer
      commit: 85e0a0f8bfa42dc05b7d89798df6fbc2c13147a6
[4/4] arm64: dts: qcom: msm8916-acer-a1-724: Add touchscreen
      commit: 7b8847e9d56f5e397b37df63f271f3166a09f3a8

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2022-12-28  4:37 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-11-23  3:37 [PATCH v6 0/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree Lin, Meng-Bo
2022-11-23  3:38 ` [PATCH v6 1/4] dt-bindings: qcom: Document msm8916-acer-a1-724 Lin, Meng-Bo
2022-11-23  3:39 ` [PATCH v6 2/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree Lin, Meng-Bo
2022-11-23  3:39 ` [PATCH v6 3/4] arm64: dts: qcom: msm8916-acer-a1-724: Add accelerometer/magnetometer Lin, Meng-Bo
2022-11-23  3:39 ` [PATCH v6 4/4] arm64: dts: qcom: msm8916-acer-a1-724: Add touchscreen Lin, Meng-Bo
2022-11-23 11:28   ` Konrad Dybcio
2022-12-28  4:36 ` (subset) [PATCH v6 0/4] arm64: dts: qcom: msm8916-acer-a1-724: Add initial device tree Bjorn Andersson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).