From: Jagan Teki <jagan@edgeble.ai>
To: Heiko Stuebner <heiko@sntech.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
Johan Jonker <jbx6244@gmail.com>, Jagan Teki <jagan@edgeble.ai>
Subject: [PATCH v8 8/8] ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2) IO
Date: Thu, 24 Nov 2022 00:01:24 +0530 [thread overview]
Message-ID: <20221123183124.6911-9-jagan@edgeble.ai> (raw)
In-Reply-To: <20221123183124.6911-1-jagan@edgeble.ai>
Neural Compute Module 2(Neu2) IO board is an industrial form factor
evaluation board from Edgeble AI.
General features:
- microSD slot
- MIPI DSI connector
- 2x USB Host
- 1x USB OTG
- Ethernet
- mini PCIe
- Onboard PoE
- RS485, RS232, CAN
- Micro Phone array
- Speaker
- RTC battery slot
- 40-pin expansion
Neu2 needs to mount on top of this IO board in order to create complete
Edgeble Neural Compute Module 2(Neu2) IO platform.
Add support for it.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
---
Changes for v8, v7:
- none
Changes for v6:
- update the carrier name.
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts | 38 ++++++++++++++++++++
2 files changed, 39 insertions(+)
create mode 100644 arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e48cfbc4e8e4..40cc34bd4945 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1122,6 +1122,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rv1108-elgin-r1.dtb \
rv1108-evb.dtb \
+ rv1126-edgeble-neu2-io.dtb \
rk3036-evb.dtb \
rk3036-kylin.dtb \
rk3066a-bqcurie2.dtb \
diff --git a/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
new file mode 100644
index 000000000000..ae1cf344239b
--- /dev/null
+++ b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-edgeble-neu2.dtsi"
+
+/ {
+ model = "Edgeble Neu2 IO Board";
+ compatible = "edgeble,neural-compute-module-2-io",
+ "edgeble,neural-compute-module-2", "rockchip,rv1126";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+ rockchip,default-sample-phase = <90>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
--
2.25.1
prev parent reply other threads:[~2022-11-23 18:34 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-23 18:31 [PATCH v8 0/8] ARM: Add Rockchip RV1126 support Jagan Teki
2022-11-23 18:31 ` [PATCH v8 1/8] dt-bindings: arm: rockchip: Add pmu compatible for rv1126 Jagan Teki
2022-11-23 18:31 ` [PATCH v8 2/8] dt-bindings: timer: rk-timer: Add rktimer " Jagan Teki
2022-11-24 11:22 ` Krzysztof Kozlowski
2022-12-13 7:50 ` Jagan Teki
2022-12-13 8:48 ` Daniel Lezcano
2022-11-23 18:31 ` [PATCH v8 3/8] ARM: dts: rockchip: Add Rockchip RV1126 pinctrl Jagan Teki
2022-11-23 18:31 ` [PATCH v8 4/8] ARM: dts: rockchip: Add Rockchip RV1126 SoC Jagan Teki
2022-11-23 18:31 ` [PATCH v8 5/8] dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd Jagan Teki
2022-11-23 18:31 ` [PATCH v8 6/8] dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 2 Jagan Teki
2022-11-23 18:31 ` [PATCH v8 7/8] ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2) Jagan Teki
2022-11-23 18:31 ` Jagan Teki [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221123183124.6911-9-jagan@edgeble.ai \
--to=jagan@edgeble.ai \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jbx6244@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).