From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Heiko Stuebner <heiko@sntech.de>
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Christopher Obbard <chris.obbard@collabora.com>,
Benjamin Gaignard <benjamin.gaignard@collabora.com>,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel@collabora.com,
Sebastian Reichel <sebastian.reichel@collabora.com>
Subject: [PATCHv4 7/7] arm64: dts: rockchip: Add rock-5b board
Date: Thu, 24 Nov 2022 15:49:28 +0100 [thread overview]
Message-ID: <20221124144928.35381-8-sebastian.reichel@collabora.com> (raw)
In-Reply-To: <20221124144928.35381-1-sebastian.reichel@collabora.com>
From: Christopher Obbard <chris.obbard@collabora.com>
Add board file for the RK3588 Rock 5B board. This is a basic
implementation which just brings up the eMMC and UART which is
enough to successfully boot Linux.
The ethernet controller is connected via PCIe so support will
come in a follow-up patch.
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3588-rock-5b.dts | 44 +++++++++++++++++++
2 files changed, 45 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 31fa55750a0f..b31aa1b0e9e3 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -73,4 +73,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
new file mode 100644
index 000000000000..baf46bd30b38
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588.dtsi"
+
+/ {
+ model = "Radxa Rock 5B Board";
+ compatible = "radxa,rock-5b", "rockchip,rk3588";
+
+ aliases {
+ mmc1 = &sdhci;
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&sdhci {
+ bus-width = <8>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
--
2.38.1
next prev parent reply other threads:[~2022-11-24 14:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-24 14:49 [PATCHv4 0/7] Initial rk3588 DT Sebastian Reichel
2022-11-24 14:49 ` [PATCHv4 1/7] dt-bindings: soc: rockchip: add initial rk3588 syscon compatibles Sebastian Reichel
2022-11-24 14:49 ` [PATCHv4 2/7] arm64: dts: rockchip: Add rk3588 pinctrl data Sebastian Reichel
2022-11-24 14:49 ` [PATCHv4 3/7] arm64: dts: rockchip: Add base DT for rk3588 SoC Sebastian Reichel
2022-11-24 14:49 ` [PATCHv4 4/7] dt-bindings: arm: rockchip: add initial rk3588 boards Sebastian Reichel
2022-11-24 14:49 ` [PATCHv4 5/7] arm64: dts: rockchip: Add rk3588-evb1 board Sebastian Reichel
2022-11-28 6:56 ` Michael Riesch
2022-11-24 14:49 ` [PATCHv4 6/7] arm64: dts: rockchip: Add rock-5a board Sebastian Reichel
2022-11-28 6:52 ` Michael Riesch
2022-11-24 14:49 ` Sebastian Reichel [this message]
2022-11-28 6:54 ` [PATCHv4 7/7] arm64: dts: rockchip: Add rock-5b board Michael Riesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221124144928.35381-8-sebastian.reichel@collabora.com \
--to=sebastian.reichel@collabora.com \
--cc=benjamin.gaignard@collabora.com \
--cc=chris.obbard@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=kernel@collabora.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).