[PATCH] arm64: dts: qcom: sm6115: Add interconnect nodes

[Bhupesh Sharma <bhupesh.sharma@linaro.org>]

Add the interconnect nodes inside SM6115 dtsi.

Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
- Based on linux-next/master
- Depends on the SM6115 dt-binding and driver patchset, which can be
  seen here: https://lore.kernel.org/linux-arm-msm/20221130103841.2266464-1-bhupesh.sharma@linaro.org/ 

 arch/arm64/boot/dts/qcom/sm6115.dtsi | 51 ++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index e4a2440ce544..dad5ab3edf0e 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -485,6 +485,57 @@ usb_1_hsphy: phy@1613000 {
 			status = "disabled";
 		};
 
+		snoc: interconnect@1880000 {
+			compatible = "qcom,sm6115-snoc";
+			reg = <0x01880000 0x60200>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+
+			clk_virt: interconnect-clk {
+				compatible = "qcom,sm6115-clk-virt";
+				#interconnect-cells = <1>;
+				clock-names = "bus", "bus_a";
+				clocks = <&rpmcc RPM_SMD_QUP_CLK>,
+					 <&rpmcc RPM_SMD_QUP_A_CLK>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,sm6115-mmnrt-virt";
+				#interconnect-cells = <1>;
+				clock-names = "bus", "bus_a";
+				clocks = <&rpmcc RPM_SMD_MMNRT_CLK>,
+					 <&rpmcc RPM_SMD_MMNRT_A_CLK>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,sm6115-mmrt-virt";
+				#interconnect-cells = <1>;
+				clock-names = "bus", "bus_a";
+				clocks = <&rpmcc RPM_SMD_MMRT_CLK>,
+					 <&rpmcc RPM_SMD_MMRT_A_CLK>;
+			};
+		};
+
+		cnoc: interconnect@1900000 {
+			compatible = "qcom,sm6115-cnoc";
+			reg = <0x01900000 0x8200>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
+		};
+
+		bimc: interconnect@4480000 {
+			compatible = "qcom,sm6115-bimc";
+			reg = <0x04480000 0x80000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
 		qfprom@1b40000 {
 			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
 			reg = <0x01b40000 0x7000>;
-- 
2.38.1