Re: [PATCH v3 1/4] hwmon: (pmbus/core): Add status byte to regulator flag map

[Guenter Roeck <linux@roeck-us.net>]

On Wed, Nov 30, 2022 at 05:58:28PM +0100, Naresh Solanki wrote:
> Add PMBus status byte to regulator flag map.
> 
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> 
> ---
> Changes:
> - Remove status input

Not really.

> - Add comment for PMBUS status byte.
> ---
>  drivers/hwmon/pmbus/pmbus_core.c | 20 +++++++++++---------
>  1 file changed, 11 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> index 95e95783972a..a7b4ae0f1f3b 100644
> --- a/drivers/hwmon/pmbus/pmbus_core.c
> +++ b/drivers/hwmon/pmbus/pmbus_core.c
> @@ -2751,7 +2751,16 @@ struct pmbus_regulator_status_category {
>  };
>  
>  static const struct pmbus_regulator_status_category pmbus_regulator_flag_map[] = {
> -	{
> +	{	/* STATUS byte is always present. */
> +		.func = -1,
> +		.reg = PMBUS_STATUS_BYTE,
> +		.bits = (const struct pmbus_regulator_status_assoc[]) {
> +			{ PB_STATUS_IOUT_OC,   REGULATOR_ERROR_OVER_CURRENT },
> +			{ PB_STATUS_VOUT_OV,   REGULATOR_ERROR_REGULATION_OUT },
> +			{ PB_STATUS_VIN_UV,    REGULATOR_ERROR_UNDER_VOLTAGE },

Still there.

> +			{ },
> +		},
> +	}, {
>  		.func = PMBUS_HAVE_STATUS_VOUT,
>  		.reg = PMBUS_STATUS_VOUT,
>  		.bits = (const struct pmbus_regulator_status_assoc[]) {
> @@ -2768,6 +2777,7 @@ static const struct pmbus_regulator_status_category pmbus_regulator_flag_map[] =
>  			{ PB_IOUT_OC_WARNING,    REGULATOR_ERROR_OVER_CURRENT_WARN },
>  			{ PB_IOUT_OC_FAULT,      REGULATOR_ERROR_OVER_CURRENT },
>  			{ PB_IOUT_OC_LV_FAULT,   REGULATOR_ERROR_OVER_CURRENT },
> +			{ PB_POUT_OP_FAULT,      REGULATOR_ERROR_FAIL },

Please document your changes in the description. There are two functional
changes hidden under "Add PMBus status byte to regulator flag map".
That is inappropriate. Those, as I have pointed out, should be separate
patches.

Guenter

>  			{ },
>  		},
>  	}, {
> @@ -2834,14 +2844,6 @@ static int pmbus_regulator_get_error_flags(struct regulator_dev *rdev, unsigned
>  		if (status & PB_STATUS_POWER_GOOD_N)
>  			*flags |= REGULATOR_ERROR_REGULATION_OUT;
>  	}
> -	/*
> -	 * Unlike most other status bits, PB_STATUS_{IOUT_OC,VOUT_OV} are
> -	 * defined strictly as fault indicators (not warnings).
> -	 */
> -	if (status & PB_STATUS_IOUT_OC)
> -		*flags |= REGULATOR_ERROR_OVER_CURRENT;
> -	if (status & PB_STATUS_VOUT_OV)
> -		*flags |= REGULATOR_ERROR_REGULATION_OUT;
>  
>  	/*
>  	 * If we haven't discovered any thermal faults or warnings via
> 
> base-commit: 9494c53e1389b120ba461899207ac8a3aab2632c
> -- 
> 2.37.3
>