[PATCH 2/4] arm64: dts: rockchip: don't set cpll rate for Odroid Go

[Chris Morgan <macroalpha82@gmail.com>]

From: Chris Morgan <macromorgan@hotmail.com>

The Odroid Go Advance devicetree tries to set the rate for the cpll
clock to 17MHz, which is not a supported rate. This fails, and triggers
the error of "clk: couldn't set cpll clk rate to 17000000 (-22),
current rate: 17000000" in the dmesg log. Remove the incorrect rate.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
index 60063f4bb366..802be64626d6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
@@ -192,14 +192,12 @@ &cru {
 	assigned-clocks = <&cru PLL_NPLL>,
 		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
 		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
-		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
-		<&cru PLL_CPLL>;
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
 
 	assigned-clock-rates = <1188000000>,
 		<200000000>, <200000000>,
 		<150000000>, <150000000>,
-		<100000000>, <200000000>,
-		<17000000>;
+		<100000000>, <200000000>;
 };
 
 &display_subsystem {
-- 
2.25.1