From: Vignesh Raghavendra <vigneshr@ti.com>
To: Peter Ujfalusi <peter.ujfalusi@gmail.com>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: <dmaengine@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Vignesh Raghavendra <vigneshr@ti.com>
Subject: [PATCH 5/5] dmaengine: ti: k3-udma: Add support for BCDMA CSI RX
Date: Tue, 6 Dec 2022 10:05:54 +0530 [thread overview]
Message-ID: <20221206043554.1521522-6-vigneshr@ti.com> (raw)
In-Reply-To: <20221206043554.1521522-1-vigneshr@ti.com>
BCDMA CSI RX present on AM62Ax SoC is a dedicated DMA for servicing
Camera Serial Interface (CSI) IP. Add support for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
drivers/dma/ti/k3-udma.c | 37 ++++++++++++++++++++++++++++++++-----
1 file changed, 32 insertions(+), 5 deletions(-)
diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index 19fce52a9b53..a8b497ed3f30 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -135,6 +135,7 @@ struct udma_match_data {
u32 flags;
u32 statictr_z_mask;
u8 burst_size[3];
+ struct udma_soc_data *soc_data;
};
struct udma_soc_data {
@@ -4295,6 +4296,25 @@ static struct udma_match_data j721e_mcu_data = {
},
};
+static struct udma_soc_data am62a_dmss_csi_soc_data = {
+ .oes = {
+ .bcdma_rchan_data = 0xe00,
+ .bcdma_rchan_ring = 0x1000,
+ },
+};
+
+static struct udma_match_data am62a_bcdma_csirx_data = {
+ .type = DMA_TYPE_BCDMA,
+ .psil_base = 0x3100,
+ .enable_memcpy_support = false,
+ .burst_size = {
+ TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES, /* Normal Channels */
+ 0, /* No H Channels */
+ 0, /* No UH Channels */
+ },
+ .soc_data = &am62a_dmss_csi_soc_data,
+};
+
static struct udma_match_data am64_bcdma_data = {
.type = DMA_TYPE_BCDMA,
.psil_base = 0x2000, /* for tchan and rchan, not applicable to bchan */
@@ -4344,6 +4364,10 @@ static const struct of_device_id udma_of_match[] = {
.compatible = "ti,am64-dmss-pktdma",
.data = &am64_pktdma_data,
},
+ {
+ .compatible = "ti,am62a-dmss-bcdma-csirx",
+ .data = &am62a_bcdma_csirx_data,
+ },
{ /* Sentinel */ },
};
@@ -5272,12 +5296,15 @@ static int udma_probe(struct platform_device *pdev)
}
ud->match_data = match->data;
- soc = soc_device_match(k3_soc_devices);
- if (!soc) {
- dev_err(dev, "No compatible SoC found\n");
- return -ENODEV;
+ ud->soc_data = ud->match_data->soc_data;
+ if (!ud->soc_data) {
+ soc = soc_device_match(k3_soc_devices);
+ if (!soc) {
+ dev_err(dev, "No compatible SoC found\n");
+ return -ENODEV;
+ }
+ ud->soc_data = soc->data;
}
- ud->soc_data = soc->data;
ret = udma_get_mmrs(pdev, ud);
if (ret)
--
2.38.1
next prev parent reply other threads:[~2022-12-06 4:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-06 4:35 [PATCH 0/5] dmaengine: Add support for AM62A SoC DMAs Vignesh Raghavendra
2022-12-06 4:35 ` [PATCH 1/5] dt-bindings: dma: ti: k3-bcdma: Add bindings for BCDMA CSI RX Vignesh Raghavendra
2022-12-06 8:32 ` Krzysztof Kozlowski
2022-12-07 6:09 ` Vignesh Raghavendra
2022-12-07 8:03 ` Krzysztof Kozlowski
2022-12-06 4:35 ` [PATCH 2/5] dmaengine: ti: k3-udma: Fix BCDMA for case w/o BCHAN Vignesh Raghavendra
2022-12-10 8:24 ` Péter Ujfalusi
2022-12-12 4:38 ` Vignesh Raghavendra
2022-12-06 4:35 ` [PATCH 3/5] dmaengine: ti: k3-psil-am62a: Add AM62Ax PSIL and PDMA data Vignesh Raghavendra
2022-12-06 4:35 ` [PATCH 4/5] dmaengine: ti: k3-udma: Add support for DMAs on AM62A SoC Vignesh Raghavendra
2022-12-06 4:35 ` Vignesh Raghavendra [this message]
2022-12-10 8:49 ` [PATCH 5/5] dmaengine: ti: k3-udma: Add support for BCDMA CSI RX Péter Ujfalusi
2022-12-12 4:51 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221206043554.1521522-6-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.ujfalusi@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).