From: Chuanhong Guo <gch981213@gmail.com>
To: linux-leds@vger.kernel.org
Cc: Chuanhong Guo <gch981213@gmail.com>, Pavel Machek <pavel@ucw.cz>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Stanislav Jakubek <stano.jakubek@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Shawn Guo <shawnguo@kernel.org>,
Johan Hovold <johan+linaro@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Marijn Suijten <marijn.suijten@somainline.org>,
Sven Schwermer <sven.schwermer@disruptive-technologies.com>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v3 0/3] leds: add driver for SPI driven WorldSemi WS2812B RGB LEDs
Date: Wed, 7 Dec 2022 12:09:01 +0800 [thread overview]
Message-ID: <20221207040904.582585-1-gch981213@gmail.com> (raw)
This patch adds support for driving a chain of WS2812B LED chips
using SPI bus.
WorldSemi WS2812B is a individually addressable LED chip that
can be chained together and controlled individually using a
single wire. The chip recognize a long pulse as a bit of 1 and
a short pulse as a bit of 0. Host sends a continuous stream
of 24-bits color values, each LED chip takes the first 3 byte
it receives as its color value and passes the leftover bytes to
the next LED on the chain.
This driver simulates this protocol using SPI bus by sending
a long pulse as 3'b110 and a short pulse as 3'b100. The SPI
frequency needs to be 2.105MHz~2.85MHz for the timing to be
correct and the controller needs to transfer all the bytes
continuously.
Changes since v1:
various dt binding fixes
add support for default-brightness
Changes since v2:
more dt binding fixes
drop default-brightness and default-intensity
Chuanhong Guo (3):
dt-bindings: vendor-prefixes: add an entry for WorldSemi
dt-bindings: leds: add dt schema for worldsemi,ws2812b
leds: add driver for SPI driven WorldSemi WS2812B RGB LEDs
.../bindings/leds/worldsemi,ws2812b.yaml | 116 ++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
drivers/leds/rgb/Kconfig | 11 +
drivers/leds/rgb/Makefile | 1 +
drivers/leds/rgb/leds-ws2812b.c | 219 ++++++++++++++++++
5 files changed, 349 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml
create mode 100644 drivers/leds/rgb/leds-ws2812b.c
--
2.38.1
next reply other threads:[~2022-12-07 4:09 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-07 4:09 Chuanhong Guo [this message]
2022-12-07 4:09 ` [PATCH v3 1/3] dt-bindings: vendor-prefixes: add an entry for WorldSemi Chuanhong Guo
2022-12-07 4:09 ` [PATCH v3 2/3] dt-bindings: leds: add dt schema for worldsemi,ws2812b Chuanhong Guo
2022-12-08 7:52 ` Krzysztof Kozlowski
2022-12-12 2:03 ` Chuanhong Guo
2022-12-07 4:09 ` [PATCH v3 3/3] leds: add driver for SPI driven WorldSemi WS2812B RGB LEDs Chuanhong Guo
2022-12-07 11:02 ` Lee Jones
2022-12-08 3:00 ` Chuanhong Guo
2022-12-08 6:42 ` Chuanhong Guo
2022-12-08 15:17 ` Lee Jones
2022-12-13 9:03 ` [PATCH v3 0/3] " Pavel Machek
2022-12-13 9:51 ` Chuanhong Guo
2022-12-13 18:50 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221207040904.582585-1-gch981213@gmail.com \
--to=gch981213@gmail.com \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=johan+linaro@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=stano.jakubek@gmail.com \
--cc=sven.schwermer@disruptive-technologies.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).