[PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible

[Alexander Stein <alexander.stein@ew.tq-group.com>]

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 5 ++---
 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi         | 5 ++---
 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index a3340814099aa..f7f657b007a18 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -516,9 +516,8 @@ tlv320aic3x04: audio-codec@18 {
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97_1c: temperature-sensor-eeprom@1c {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	se97_1c: temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1c>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
index 7bd680a926ce7..ebc29a950ba9a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -63,9 +63,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	se97: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
-- 
2.34.1