[PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible

[PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible

[Alexander Stein]

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 5 ++---
 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi         | 5 ++---
 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index a3340814099aa..f7f657b007a18 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -516,9 +516,8 @@ tlv320aic3x04: audio-codec@18 {
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97_1c: temperature-sensor-eeprom@1c {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	se97_1c: temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1c>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
index 7bd680a926ce7..ebc29a950ba9a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -63,9 +63,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	se97: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
-- 
2.34.1

[PATCH 2/7] arm64: dts: mba8mx: Fix temperature sensor compatible

[Alexander Stein]

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/mba8mx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index 446a8ec3eb6fc..94d83f20233b7 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -260,8 +260,8 @@ tlv320aic3x04: audio-codec@18 {
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
-	sensor1: sensor@1f {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor1: temperator-sensor@1f {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1f>;
 	};
 
-- 
2.34.1

[PATCH 3/7] arm64: dts: imx8mq-tqma8mq: Fix temperature sensor compatible

[Alexander Stein]

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
index 9a95e30fb42d9..5ca6b22525469 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
@@ -194,8 +194,8 @@ vgen6_reg: vgen6 {
 		};
 	};
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
-- 
2.34.1

[PATCH 4/7] arm64: dts: imx8mn-tqma8mqnl: Fix temperature sensor compatible

[Alexander Stein]

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
index 48b965386e879..391ca5516e4c5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
@@ -77,8 +77,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
-- 
2.34.1

[PATCH 5/7] arm64: dts: imx8mm-tqma8mqml: Fix temperature sensor compatible

[Alexander Stein]

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
index 88d89cd46c74a..b4466a26d838a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
@@ -87,8 +87,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
-- 
2.34.1

[PATCH 6/7] ARM: dts: mba6ulx: Fix temperature sensor compatible

[Alexander Stein]

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm/boot/dts/mba6ulx.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi
index b8e576ab8860d..d08f525acfe56 100644
--- a/arch/arm/boot/dts/mba6ulx.dtsi
+++ b/arch/arm/boot/dts/mba6ulx.dtsi
@@ -229,7 +229,7 @@ tlv320aic32x4: audio-codec@18 {
 	};
 
 	jc42: temperature-sensor@19 {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x19>;
 	};
 
-- 
2.34.1

[PATCH 7/7] ARM: dts: imx6ul-tqma6ul: Fix temperature sensor compatible

[Alexander Stein]

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
index eca94ed6451b0..57e647fc32374 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
@@ -116,8 +116,8 @@ reg_vldo4: vldo4 {
 		};
 	};
 
-	jc42_1a: eeprom-temperature-sensor@1a {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	jc42_1a: eeprom-temperature@1a {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1a>;
 	};
 
-- 
2.34.1

[PATCH 2/7] arm64: dts: mba8mx: Fix temperature sensor compatible

[Alexander Stein]

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/mba8mx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index 446a8ec3eb6fc..94d83f20233b7 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -260,8 +260,8 @@ tlv320aic3x04: audio-codec@18 {
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
-	sensor1: sensor@1f {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor1: temperator-sensor@1f {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1f>;
 	};
 
-- 
2.34.1

Re: [PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible

[Shawn Guo]

On Wed, Dec 07, 2022 at 01:41:59PM +0100, Alexander Stein wrote:
> Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
> While at it, fix the node name according to device tree spec
> recommendations. The EEPROM is a separate node anyway.
> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>

Could you combine the series into two patches, one for arm64 and the
other for ARM?

Shawn

> ---
>  arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 5 ++---
>  arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi         | 5 ++---
>  2 files changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> index a3340814099aa..f7f657b007a18 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> @@ -516,9 +516,8 @@ tlv320aic3x04: audio-codec@18 {
>  		ldoin-supply = <&reg_vcc_3v3>;
>  	};
>  
> -	/* NXP SE97BTP with temperature sensor + eeprom */
> -	se97_1c: temperature-sensor-eeprom@1c {
> -		compatible = "nxp,se97", "jedec,jc-42.4-temp";
> +	se97_1c: temperature-sensor@1c {
> +		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
>  		reg = <0x1c>;
>  	};
>  
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
> index 7bd680a926ce7..ebc29a950ba9a 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
> @@ -63,9 +63,8 @@ &i2c1 {
>  	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>  	status = "okay";
>  
> -	/* NXP SE97BTP with temperature sensor + eeprom */
> -	se97: temperature-sensor-eeprom@1b {
> -		compatible = "nxp,se97", "jedec,jc-42.4-temp";
> +	se97: temperature-sensor@1b {
> +		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
>  		reg = <0x1b>;
>  	};
>  
> -- 
> 2.34.1
> 

Re: [PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible

[Alexander Stein]

Hi Shawn,

Am Samstag, 31. Dezember 2022, 13:57:58 CET schrieb Shawn Guo:
> On Wed, Dec 07, 2022 at 01:41:59PM +0100, Alexander Stein wrote:
> > Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
> > While at it, fix the node name according to device tree spec
> > recommendations. The EEPROM is a separate node anyway.
> > 
> > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> 
> Could you combine the series into two patches, one for arm64 and the
> other for ARM?

I just split and resend the series, but I overlooked that you wanted to squash 
them actually :( I'll do another round.

Best regards,
Alexander

> Shawn
> 
> > ---
> > 
> >  arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 5 ++---
> >  arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi         | 5 ++---
> >  2 files changed, 4 insertions(+), 6 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> > b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index
> > a3340814099aa..f7f657b007a18 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> > @@ -516,9 +516,8 @@ tlv320aic3x04: audio-codec@18 {
> > 
> >  		ldoin-supply = <&reg_vcc_3v3>;
> >  	
> >  	};
> > 
> > -	/* NXP SE97BTP with temperature sensor + eeprom */
> > -	se97_1c: temperature-sensor-eeprom@1c {
> > -		compatible = "nxp,se97", "jedec,jc-42.4-temp";
> > +	se97_1c: temperature-sensor@1c {
> > +		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
> > 
> >  		reg = <0x1c>;
> >  	
> >  	};
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi index
> > 7bd680a926ce7..ebc29a950ba9a 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
> > @@ -63,9 +63,8 @@ &i2c1 {
> > 
> >  	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> >  	status = "okay";
> > 
> > -	/* NXP SE97BTP with temperature sensor + eeprom */
> > -	se97: temperature-sensor-eeprom@1b {
> > -		compatible = "nxp,se97", "jedec,jc-42.4-temp";
> > +	se97: temperature-sensor@1b {
> > +		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
> > 
> >  		reg = <0x1b>;
> >  	
> >  	};